Setting up the Precision Matthews PM-1440HVT-2 Lathe

Подписаться 360 тыс.

Просмотров 19 тыс.

50% 1

Full Story: bit.ly/3QKj85B
UR on RUMBLE: rumble.com/ult...
UR on Patreon: / ultimatereloader
Manual machinery has always interested me. I’ve used the Precision Matthews PM-949TV Precision Mill, PM-1440GT, and TL-1660 on a variety of projects and they’ve served me well. While I still use these lathes, I needed something more-enter the PM-1440HVT-2. Check out how I set it up in this video!
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Disclaimer:
You alone are responsible for the safety of yourself and your property.
Check local and state laws before undertaking any activity involving possessing, transporting, and shooting firearms. Check local and state laws before attempting to load ammunition or perform any modifications to a firearm. Always abide by the law. Always practice gun safety.
The content on this channel (including videos, ammunition reloading data, technical data, comments, and any other information contained within) is for demonstration purposes only.
Do not attempt any of the processes or procedures shown or described in this video or on this RU-vid channel (gavintoobe).
Any reloading data supplied on this RU-vid channel (gavintoobe) or in this video, including any comments from viewers and readers must be assumed to be in error.
Always consult at least three sources of manufacturer's ammunition reloading data before reloading your own ammunition.
Do not attempt to repair or modify any firearms based on information found on this RU-vid channel or in this video.
Gunsmithing procedures should only be performed only by a licensed gunsmith.
Ultimate Reloader, LLC can not be held liable for any harm caused to any individual or any personal property related to activities, procedures, techniques, or practices described in whole or part on this RU-vid channel (gavintoobe) or in this video.
By watching this video in whole or in part, you agree that you alone are solely responsible for your own safety and property as it pertains to activities, procedures, techniques, or practices described in whole or part on this RU-vid channel (gavintoobe) or in this video.
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Material Connection Notice:
The following Ultimate Reloader partners are featured in this video:
Precision Matthews
Ultimate Reloader partnerships involve one or more of the following:
Product supplied for evaluation + testing + features in videos/articles, paid advertising and promotions, engineering and product development services, scientific testing and evaluation, external media production and related marketing services.
Ultimate Reloader LLC is committed to publishing subjective and data-driven information+insights related to products whether it be favorable or unfavorable or both.
For more information about Ultimate Reloader partnerships, please visit: ultimatereload...

Опубликовано:

5 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 47

@Heikin-Ashi-Larry 11 месяцев назад

You’re living the life I want to live!!

@kramr7012 11 месяцев назад

Nice! Gave me flashbacks from my teens and my Dad showing me the Gisholt turret lathe he operated to put my brother and I through college. Long hours and overtime working for GTE/Noth American Philips. God Bless his German Work Ethic!

@jonathanlink1006 9 месяцев назад

Need some more video on this lathe…… let’s get turning . Please!

@owais146 11 месяцев назад

CONGRATULATIONS MAESTRO

@n.u.t.y. 11 месяцев назад

I just bought and set up a 13x36 lathe in the back of my garage. But it is 80+ years old, so the set up procedure involved scraping years of accumulated sludge off, but not cosmoline! It was 3 phase, so I added a VFD. I've done a basic leveling, but the machinists level will have to wait for a future paycheck....

@JonathanBowman-j5s 11 месяцев назад

This is exactly the videos I needed as I get my new Grizzly set up. The exploratory learning has been interesting, and expensive, but thankfully not destructive.

@RobinP556 11 месяцев назад

VERY NICE!!! I have plans in 2024 to add a baby brother, the 1340GT, to my shop. That’s in all likelihood as big as I’ll go or need…or not. 😅

@michaeldunn150 11 месяцев назад

It always fun getting new toys...Haha!!! Congrats Gavin.

@russhayes4882 11 месяцев назад

Great lathe video !

@KevinBrown-r7d 11 месяцев назад

Your new setup looks a lot simpler, the super fine accurate level helps.

@kassilewis5511 11 месяцев назад

Makes my old Southbend heavy 10 look like something that came over on the Mayflower.🤣 Those are some beautiful machines you have. One day I'll put the H10 to rest and upgrade.....when my budget will let me.

@flyzeyefab 10 дней назад

I've been looking at lathes and mills for 10+ years now... I've toyed with the idea of the smaller "mini" options on the market, but fear I will regret spending between $500 and $2000 only to find (in short order) that I should have gone straight for the PM1440HVT Lathe. I'm still not fully funded for such an acquisition, but I can plan. On that note, I don't see any space requirements or dims on the PM website. Do you have access to this information? I'm planning to add a second 50A outlet for the future installation. As an aside, thanks for the great, informative content!

@SVTBansheeman 11 месяцев назад

Do not wear gloves around a rotating lathe. That goes for those thin latex ones as well. Its great to see someone talk about setting up a lathe. We just had 9 cnc's leveled and set up 2-3 weeks ago in our shop 👍

@joshuagibson2520 11 месяцев назад

Need to get you a 5C collet quick change for the spindle. I think I would have went ahead and gotten with some CNC capability. I get it. Pretty useless for most gunsmithing but it sure is handy to have some ProtoTrak type conversational capabilities.

@odiegator 11 месяцев назад

Gavin, a question. What about cutting chamber inside a separate, removable piece of metal. This way I could chamber and shoot either British 303 or 7.62x54. They have identical projectiles and almost identical powder charge.

@jeffreyhallam5517 11 месяцев назад

That’s a very interesting question. Considering that a 7.62x54r brass can be resized for .303 british by simply running it through a .303 form die I kinda get it. I’m not familiar with removable chamber inserts. I’m fairly certain that would be tricky. Laminated steal is not as strong as a homogeneous block of steel and I would fear the detonation of the round to compact the insert inside of the receiver the same way brass thins itself out with repeated firings. Sorta hammering itself out and making it harder and harder to extract the insert. Or maybe you were thinking about separate chamber blocks that thread in as a separate round between the receiver and the barrel?

@odiegator 11 месяцев назад

@@jeffreyhallam5517 Separate Chamber block, removable. With another just like it, chambered in another cartridge. With copper washer inside a recess to provide gas seal between the barrel and the Chamber part. One of the blocks would have a slightly longer throat because 762x54R is that much shorter. Bolt face would have to be wide enough for 762x54 to fit. Headspace can remain true on both, because these blocks would have equal length.

@guyoglesby6677 11 месяцев назад

Gavin, your last "What you need to begin Reloading" video is 9 yrs. old could you please do an updated version.....Thanks....Guy

@f21sh 7 месяцев назад

Hi, Gavin nice, real nice lathe, thanks for the great run downs on equipment always great. Question I have is which online supplier are you buying your ridged reamer holders? MT3's?

@Ultimatereloader 7 месяцев назад

Here you go! www.kbctools.com/itemdetail/1-507-390

@f21sh 7 месяцев назад

THANK YOU ! it is Great that you share, it fully supports our sport.@@Ultimatereloader

@JH-ox9kw 10 месяцев назад

id like to see a list of the tool holders and carbide cutters you use for barrel work. Thx in advance

@Joesshopandoutdoors 11 месяцев назад

I think your dro readout isn’t in the greatest spot. It’s going to be covered in oil

@kkduncanson 11 месяцев назад

Any need for a thin high density rubber under the leveling feet? To avoid vibration?

@Dave5783 11 месяцев назад

wish I had one

@learnaswegofarm2227 9 месяцев назад

Gavin that thing looks super short! Is it shorter statured than the 1440gt???

@MC-wh6xk 10 месяцев назад

Where did you get the backsplash mount for the centers? Or did you make it?

@doylearves75 11 месяцев назад

How long did it take to get yours? Ours has been on order for about a year and a half. The first one was on a truck that rolled, so we are still waiting.

@StuartsShed 11 месяцев назад

So what happened to the other lathes? Did they not work out, or do you keep them all for different things? I just bought a very similar machine to this. Same basic design.

@Ultimatereloader 11 месяцев назад

I use them all- two shops! Mountain shop and city shop :)

@StuartsShed 11 месяцев назад

Excellent - that’s the best way.

@williamsweet7511 11 месяцев назад

I’ve been looking at Grizzly. I want a lathe that can ream, thread 30ish inch barrels. 1.25”. If you can’t tell I’m new to this, I’d like to do maybe 10 barrels a year, nothing to crazy. I want to learn how to do it, but for myself. Any suggestions ??

@GreatLakesLogger 11 месяцев назад

Recommendations for a 700 clone action? Also, anybody in the east side of WA have a recommendation for a gunsmith that's trustworthy enough to build a custom gun? Not that far from Gavin, but im sure there's not a chance of being able to have him build one, much less afford it😂

@GreatLakesLogger 11 месяцев назад

I'm in the general Spokane area. Not looking for a completely cheap route, but don't have endless money by any means

@lja4429 11 месяцев назад

How is this better than your original lathe? … Or, don't we know that yet?

@Ultimatereloader 11 месяцев назад

Variable speed- single phase or three phase hook up, more stout cast iron base, more rigid and larger bed way. i’ve just about got it ready to start Chambering rifle barrels so we will see how things go shortly!

@sendit220swift3 11 месяцев назад

Level doesn’t matter on a lathe as mush as the alignment. I mean they have lathes on ships that aren’t ever level.

@duckslayer11000 11 месяцев назад

You will regret placing the counter in the location you have it. It is going to get blasted by chips, coolant, and oil 😂

@kuronyan3006Ackley 11 месяцев назад

✌️👍‼️

@bornodnoc1034 11 месяцев назад

Plenty of Chineseium on them cartons.

@schwellenzaehler4564 11 месяцев назад

this is a chinese machine, what do you think........😉

@schwellenzaehler4564 8 месяцев назад

@@bigboreracing356 🙄🙄 Why do you think this? Because of the Name? Sorry but if you a little bit involved in machine tools, you know, that a lot of companies let manufacture their machines in China. All with the their own brand tags. This Lathe you can get here in Europe under different brand names, always exactly the same machine. And i bet, its exactly the same thing at the North American continent! This companies are resellers, not producers!

@schwellenzaehler4564 8 месяцев назад

@@bigboreracing356you have no clue, this is a Chinese made lathe.

@schwellenzaehler4564 8 месяцев назад

😂😂😂, okay i think you are an complete i...t.

@schwellenzaehler4564 8 месяцев назад

@@bigboreracing356...... dreamer, you nothing but a dreamer..... You never can geht a USA made machine new, for this price. 🙄🤦🏻‍♂️😂🤣