We actually did this already: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-uD-Ezm3sd9A.html Focus a bit more on the actual control, but it's very very straight forward with DMX ... We'll consider this putting some more focus on the safety aspect, especially for the devices with ShowNET mainboard. There are already some more videos on this here, this should also give further insight: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-qyWwTq-KGK8.html
@@LaserworldAG No this isnt what am looking for,, this is standard DMX controller , what am saying an actual lighting controller where its not doing anything when connecting via dmx and not using shownet or any other program
OK .... but there is no real difference. But we will make a video on this, starting from scratch and explaining everything. ShowNET is NOT a software, it is the intelligent mainboard inside the lasers and this is what you need to professionally DMX or ArtNET control lasers. So it's an important part to consider when DMX controlling lasers. We will make a video explaining this, also based on wiring, addressing and such. (If you want to understand the difference between ShowNET and laser software control, here is a video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-c3eoGQrQXYM.html)