Sg116 max

Подписаться 144

50% 1

hello youtube here i show you what i use in my rc car SG116 Max for putting bigger batteries and also to make it much easir to change em.
So come along has i keep metamorphing the BEAST!
Affiliate Links for the batteries i use:
www.ampow.com/products/ovonic... (fits the original battery tray)
www.ampow.com/products/ovonic...
www.ampow.com/products/ovonic...
www.ampow.com/products/ovonic...
www.ampow.com/products/ovonic...
battery velcro straps link:
s.click.aliexpress.com/e/_EG6...
Here i leave you a comprehensive list of what i buy for my rc car, if its somethng you need and its not here, please leave me the request in the comment section, i reply ASAP, i appreciate the support.
sg116max rc truggy direct from the factory:(THIS RC IS A MUST HAVE)
s.click.aliexpress.com/e/_EIT...
Link for the hood pin retainers:
a.aliexpress.com/_EJAxnLb
Steering link kit:
s.click.aliexpress.com/e/_Dey...
HEX screws for rc cars:
s.click.aliexpress.com/e/_DnM...
Shocks I use in the sg116max:
s.click.aliexpress.com/e/_EjR...
shock oil i use in my shock tunning:(for sg116max go for 350-400 csp)
s.click.aliexpress.com/e/_EuW...
95mm tires i use the most in my sg116max:
s.click.aliexpress.com/e/_EG1...
heat sink and fan for 2847 size motor:
s.click.aliexpress.com/e/_Ezg...
must have aluminium body post:
s.click.aliexpress.com/e/_EuE...
Wire adpater to divide the signal from ESC and connect various fans:
a.aliexpress.com/_ExgyKMX
Lights i use in all my rc cars:
s.click.aliexpress.com/e/_Evn...
Electric connector for rc lights:
s.click.aliexpress.com/e/_EJ1...
4 in hex screwdriver:
s.click.aliexpress.com/e/_DF0...
Affiliate Links for the batteries i use:
www.ampow.com/products/ovonic... (fits the original battery tray)
www.ampow.com/products/ovonic...
www.ampow.com/products/ovonic...
www.ampow.com/products/ovonic...
www.ampow.com/products/ovonic...
www.ampow.com/products/ovonic...
If you want to support me more please use these affiliate links and like my videos, that is a HUGE help... thanks for watching and, DONT BE A STRANGER!
SCY 16101, SCY 16102 SCY 16103, JJRC Q130, JJRC Q117, SG116 max, SG116 pro
#rccar #toys #rc #rccars #rctoys

Хобби

Опубликовано:

11 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 33

@jeanmason8211 Месяц назад

Marvelous ❤

@Fast_Lane_RC Месяц назад

😀 thanks for the comment my friend whats promissed has to be delivered hehe, cya soon Jean, and dont be a stranger.

@RCjoaocar 29 дней назад

Comprei uma bateria de 3000mah no mercado livre ela é muito grande vou ter que fazer esse upgrade video incrível nao sei nao como ia usar ela sem esse video

@alexandernovak9410 18 дней назад

Have you ever upgraded from brushed to brushless? I bought part to upgrade differential to metal gears and found that the gears did not synchronize well. I have new esc and 2840 motor on the way.

@Fast_Lane_RC 18 дней назад

Hello my friend to install the differential you have to buy the dog bones of metal aswell, hope this helps you, if you have any questio feel free to ask. Thanks for watching

@user-oh5in7rv7l Месяц назад

Do you know of a good and fast 6v metal gear servo that would fit this truck? My replacement ESC’s 6v bec killed the stock servo’s plastic gears. Thanks

@Fast_Lane_RC Месяц назад

Hello my friend i only saw the message now, i have one solution and a servo bit first the solution: You remove the servo feom the car and you open the four screws to open the servo box and carefully you remove amd rotate the servo gear 180 degrees so it contacts with the part thats good cause the servo only uses half of the gear(its allways the first gear you see when you open the servo but check to be sure). Do you understand the process? Now the servo to fit in that space without modification has to be a mini servo so the best i could find is a metal gear servi with 4kg torque and 0.10 sec at 60 degree, its better then stock for sure: s.click.aliexpress.com/e/_EGGM8Jh If you have any doubt feel free to ask, hope o could help you.

@user-oh5in7rv7l Месяц назад

@@Fast_Lane_RC I did do the gear rebuild trick, thanks. The servo you linked seems to have different servo horn teeth amount and size compared to stock. It seems the stock servo saver won’t fit on it, and I would have to use the included solid servo arm, without the stock servo saver. Someone else recommended the JX Servo PDI-1181MG. That one seems to have the many smaller teeth, same as the stock plastic servo. I’m not sure how to determine different servo horn dimension specs. How are servo dimensions classed? Just by G? Like 17G class servos are all the same size? Thanks

@Fast_Lane_RC 29 дней назад

@@user-oh5in7rv7l i think the servo i shared works, although i never tried it, where did you saw the teeth count difference? And also the photos comparison tend to lead to optical ilusions because different zooms and photo conditions, etc, so you may think they re bigger but they are the same? The servo horns i believe only have to be the same teeth count has the servo horn the size of the servo cap is the same but i might be wrong. The servos specs are basically in torque measured in pound per inch or kilogram for centimeter, different brands tend to put those other 17g and 20g this numbers refer to the weight of the servo. Other spec you should watch out is the speed from 0 to 60 degress turn, everything near 0.1 sec is very fast. The jx servo seems very similar to the one i shared, jx servos are a more known brand name but i think they should perform identical. It is possible to put a bigger servo, i will do that in mine soon, because i ordered a new servo for my laegendary thunder, a JX ecoboost and i will be putting the oem one in the beast if i see its worth the hassle hehe. Thank you for your comment and for this discussions because these might help other viewers who read these and also it is very insteresting in my point of view, that we share the knowledge with one another, so i want to thank you for that my friend.

@beastgotunleashed9503 29 дней назад

Hey my esc/receiver not working properly since it’s the combo do you think I’ll have to bond it to controller and would you know how to?

@beastgotunleashed9503 29 дней назад

I ordered new one just wondering how would I connect it or would it automatic connect to controller

@Fast_Lane_RC 28 дней назад

@@beastgotunleashed9503 it would automatically conne t dont worry, my controllers work on both cars so you re golden. Thanks for watching see you soon

@user-om9rt7ib4w Месяц назад

Hey mine won’t turn on when I do it shows that the battery is low but it’s not

@user-om9rt7ib4w Месяц назад

And it lags if I try to turn on and off again

@Fast_Lane_RC Месяц назад

@@user-om9rt7ib4w sorry only saw the message now. lags like in the remote? Thats a brushed or brushless version? Have you tried to use contact cleaner on the ESC? When its on try do mess with the wires to see if it cuts power or something to test if its a bronken wire

@user-oh5in7rv7l Месяц назад

Mine did that with a bad ESC. It would do the reboot sound with a fully charged 2s battery. The ESC 5v servo power BEC circuit would brown-out to 3v and reboot when steering. Somehow, it would not brown out with a 3s battery. Before the ESC finally died, it would refuse to turn on, or reboot under high load going from reverse to forward. I finally replaced the ESC with a Hobbywing 16BL30, but the 6v servo voltage of the new ESC killed the servo gears. : /

@magnusstone 9 дней назад

Has anybody fit a 3s battery in the stock holder?

@Fast_Lane_RC 8 дней назад

Hello magnus and thanks for passing by, i did, the ovonic air 3s shorty battery, here is the link from ampow, the factory store: www.ampow.com/products/ovonic-11-1v-2200mah-3s-35c-short-lipo-battery-with-deans-2pcs?sca_ref=6142528.jDqkwKtYjy This fits the stock battery tray but its a tight fit but i used it no problem. But i had problems with 3s in one of my sg116 max so i only ise 2s cause 3s its too powerfull lol.

@magnusstone 8 дней назад

@@Fast_Lane_RC thank you for the response! I did not expect that those would fit. Thanks!

@Fast_Lane_RC 8 дней назад

@@magnusstone its a tight fit but they fit no problem.