Thank you, I make the videos because I want to show what is possible nowadays with 3D printing and give my opinion on what I think of the models. We have been flying in our family for over 60 years, and the hobby just won't let us go 😉
Your shard turned out really nice! What printer do you use? do you mind if you share the settings that you used on Cura? I've just bought the files and am eager to start.
Look in the video description, there are always the printers I used for the model and which filament. Printer profiles are also stored in the FB group. But you will still have to make fine adjustments in Cura for your printer.
@@printpilot3d are you also using the recommended electric motor? in the Instructions, it says This motorization is very powerful and optimized for 3d maneuvers, The Shard is not full throttle safe with it. Is it True? do you use full throttle with yours?
Now full throttle safe means that you should not fly with full throttle downwards, or at higher speed you should jerk the rudder fully. But these are also specifications that are made for other models for 3D flight, because you need the power for vertical figures, you have to be able to fly overpowered in order to torque, for example. In the video I went to the limit to see if everything holds. Of course I can't guarantee that it will hold with others, it depends on how you print. My description says the motor I use and that should also be the one in the instructions. I printed with Esun LW at 245 degrees. And it still holds 😉.
Only small parts in PLA+, everything else with LW. You can look at the building instructions for free or download them from PlanePrint, where you can see everything better.
Ja, wenn dann nur von PLANEPRINT, alles Andere ist eine Straftat. In der Anleitung findest du alles was man braucht, findest du kostenlos auf der Planeprintseite. Falls du noch andere Anbieter kennst, die Dateien von PLANEPRINT anbieten, gerne schreiben, die bekommen von mir eine Anzeige. Danke
@@printpilot3d ich meinte eigentlich, ob man die stl Dateien bekommt oder nur die für einen expliziten Drucker 😅 glaube nicht dass die jemand anderes anbietet
@@jo21e6 Leider gibt es die Leute auch. Nein, wenn man das Profil für den Drucker richtig einstellt, und das Druckbett mind. 200x200mm beträgt, müsste es auf jedem FDM Drucker funktionieren 😉.
I thought the question would come😉. The Notos is an F3A aircraft. The Shard is more stable, heavier, faster. It's probably a matter of taste. The Shard is best suited for more extreme, faster figures. But torquerolling and hovering can be done well. It was also my first day on the course. There is a lot of room for improvement, you can tell. I wanted to test the stability beforehand.