The steps e8000 engine of shimano has different mappings. With the e-tube app you can perform the firmware update, which allows you to improve the software mappings, or solve any problems
✍ SUBSCRIBE ✍
/ mountainbikingtube
☀☀☀ FOLLOW ME ON ☀☀☀
▶ STRAVA: / strava
▶ FACEBOOK: / mtbt123
▶ INSTAGRAM: / mountainbikingtube
▶ TWITTER: / mtbtube
▶ SITO: www.mountainbikingtube.com
▶ SITO: www.mtbtshop.com
✉ MAIL: mountainbikingtube@gmail.com
Hi, as you know in the family we own an ebike that I use every now and then to have fun like a little boy on the trail in dicsesa near home.
The bike is a Focus Sam2 with Shimano Steps E8000 engine, engine with three different power levels configurable via the "Shimano E-Tube" App, and in this video I will show you how to change the engine power level configuration and how to do it. the firmware upgrade
The app is freely downloadable for both Apple and Android
Then connect the smartphone to the Shimano unit via Bluetooth
Make sure to do this where you have a decent phone connection
Once you download the app, launch it. During startup, the app checks that the various firmwares are up to date, I know it were not so, you will be offered the update
Turn on the electric motor of the bike and make sure that the battery is fully charged
Using the button located below the display, you will have access to the settings menu. Hold it for at least three seconds
The navigation to the various menu items occurs by pressing the levers that regulate the intensity of the motor
To connect the device to the phone, select the 'Bluetooth LE' item,
to confirm, press the button below the display
Launch the Shimano E-Tube App ”which can be downloaded free of charge for both Apple and Android
Press the button under the display and then on the smartphone the "Bluetooth LE connection" button
And immediately after the code of the unit to be connected
It is not compulsory to enter a password so you could chat the X
Et voilaz the smartphone and the computer of the shimano engine are connected
The home screen offers you 3 main menus,
Customization = customization
Firmware update
And pre-set settings.
Selecting ‘Firmware update’, it will show you if there are updates to be installed for the 3 main units of the steps e8000 package which are: the engine, the display and the small handles to change the engine intensity levels.
It is important to update the firmware, because shimano could periodically make new settings available to optimize engine mapping or solve any problems
In fact, as you can see in this screen, there is a pending update to be installed, regarding the engine, just select the refresh icon to start the installation
By selecting the three bars at the top right, we will be able to select the engine mapping menu
#mtbt #mtb #shimano
3 май 2020