Shimano Stradic 4000FJ Fishing Reel - How to take apart, service and reassemble

Подписаться 9 тыс.

Просмотров 10 тыс.

50% 1

Shimano Stradic 4000FJ tutorial on breaking down, servicing and reassembling. See below for helpful equipment and supply links. If you found this video useful, please show some love by hitting the thumbs up button and consider....
Hitting the Thanks button under the video
or my PayPal tip jar:
PayPal.Me/TSGReel
Amazon links (containing "amzn.to") and eBay links (containing "ebay.us") below are affiliate links. If you purchase ANYTHING through these links, I may get paid a commission. Help fund my future endeavors by using them when you purchase.
AMAZON main page - amzn.to/46qttJS
EBAY main page - ebay.us/3BvTqi
Shimano Stradic 4000FJ Reels For Sale on eBay:
ebay.us/zD0bbM
Shimano Stradic Reels For Sale on Amazon:
amzn.to/44PRFUF
*****************************
Other Videos You May Like:
• Shimano Baitrunner 650... (Shimano Baitrunner 6500B Repair)
• Shimano Tiagra 16 - No... (Shimano Tiagra 16 Repair)
• Penn Battle II 4000 Fi... (Penn Battle II 4000 Tutorial)
• Daiwa Sealine 600H Fis... (Daiwa Sealine 600H Tutorial)
• Shimano Thunnus Ci4 12... (Shimano Thunnus Ci4 12000 Repair & Tutorial)
• Quantum Boca BSP40PTS ... (Quantum Boca BSP40PTS Tutorial)
• Penn International II ... (Penn International II 30TW Tutorial)
• Shimano Socorro SW1000... (Shimano Socorro SW10000 Tutorial)
• Shimano Spheros 12000F... (Shimano Spheros 12000FA Tutorial)
• Shimano Sustain 4000XG... (Shimano Sustain 4000XG Tutorial)
*****************************
The mini screwdriver sets I use spin freely in the palm of my hand, which I prefer for speed.
MINI SCREWDRIVER SET (eBay)
ebay.us/QbICC9 (Spinning - Option A)
ebay.us/STpQDI (Spinning - Option B)
ebay.us/xvTFRx (Non Spinning)
MINI SCREWDRIVER SET (Amazon)
amzn.to/3r8NdBF (Spinning - Option A)
amzn.to/43ZpJ0g (Spinning - Option B)
amzn.to/437CsN8 (Non Spinning)
Paper towels I Use:
ebay.us/Hi2pWc (eBay)
amzn.to/48udknh (Amazon)
Gloves I use:
ebay.us/4CDP89 (eBay)
amzn.to/3SeAbgY (Amazon)
I, generally, use a ratcheting, interchangeable regular-sized screwdriver for the initial loosening of screws. Here's a link to the brand I use:
amzn.to/440Bwvb
Get some additional, varying sizes Flathead and Phillips bits while you're at it.
The adjustable wrenches I use (instead of hex nut wrenches) are Husky, but these (with the red insert) work very well... 6-inch will be used the most:
ebay.us/CKiSM7 (eBay)
amzn.to/3PAbkTT (Amazon)
If you prefer to use hex nut wrenches, I'd recommend angled/offset ones, like these:
amzn.to/44ljUtL
or a pass-through socket wrench set, like this:
ebay.us/ygHAQo
Reel grease I use:
ebay.us/AtmVUv (eBay)
amzn.to/46p4p66 (Amazon)
Drag grease I use (brown for warm weather, purple for cold):
ebay.us/WU7NOh
Oils I use:
ebay.us/RLtGzV (eBay)
amzn.to/3PubkVA (Amazon)
ebay.us/I3NXpx (eBay)
amzn.to/44kjdkz (Amazon)
See my community page for links to parts suppliers:
www.youtube.co...
*****************************
Quick links to navigate my channel:
Main Channel: / tsgreelservice
Video Library: www.youtube.co...
Individual Playlists: www.youtube.co...
*****************************
Ultrasonic Cleaners. 3 liter or above:
ebay.us/olT4J6 (eBay)
amzn.to/3NusJuD (Amazon)
Small parts mesh basket for ultrasonic cleaner:
ebay.us/cmvoe8 (eBay)
amzn.to/3NuycBM (Amazon)
Ultrasonic cleaner additives (use in moderation):
amzn.to/444EaQG (dish liquid)
amzn.to/43bYZIY (heavy duty cleaner)
amzn.to/440wcZ5 (alcohol)
Workshop Overhead Light:
amzn.to/44fxbo0 (Amazon)
#TSGReelService #FishingReelRepair #shimanofishing #shimanostradic #reelrepair #fishingreelmaintenance
‪@TSGReelService‬

Опубликовано:

15 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 25

@TSGReelService 10 месяцев назад

Appreciated the video content? Want to show some love? Hit the Thanks button under the video or hit up my PayPal tip jar: PayPal.Me/TSGReel

@Steve-ul8qb Год назад

Thanks mate. Just fixed my reel. 👍

@TSGReelService Год назад

You're welcome and thanks for watching! Glad to hear it got you on the right path. Spread the word about the channel.

@YL-mc9oz 3 года назад

What patience you have, well done !!!

@TSGReelService 3 года назад

Thanks Y L. More to come!

@vladocamus 3 года назад

I can't understand that someone can ignore the overhaul of such a quality reel. There are people who would genuinely like to have and maintain such a reel but don’t have the money to afford something like that. I can understand if the owner didn’t know how to fix the fault, but if he DOESN’T CARE AND IS NOT INTERESTED, then it’s sad. Great job done! 👏😊

@TSGReelService 3 года назад

Thanks for watching! It kinda is what it is. 🙂 More vids to come.

@catherineromeo4891 Год назад

Thanks again for the video I’ve used many of your videos to do maintenance, what’s the cleaner u use to spray on ? Can u use brake cleaner or is it to strong . Thanks again for great video

@TSGReelService Год назад

Thanks! Happy to hear these videos are helping you out. At what time stamp in the video are you referring to when you're asking the cleaner that I use?

@Rekinortiher Год назад

Thanks for the video. I bought 3 old Stradic 6000FB’s and your video gave me the courage to service them myself. Question: on all three the rosswind block on the shaft had some play in it. Is this on purpose or should I tighten the two screws holding it on the shaft? Thanks!

@TSGReelService Год назад

You're welcome and thanks for checking out the video.... always love to hear when someone successfully gets the job done with the help of one of my videos! Great question! I don't believe there's there's a Stradic 6000FB, but the principles are the same. If my video was similar to your reel, then it's designed that way.... tightening the block cover screw won't do anything. It'll work fine with that slight play in it. However, if you wanted to reduce/minimize the play, you could add a shim or two under the white bushing at the bottom of the worm. If yo don't have any Shimano part #RD18199, you can also use the Daiwa 373-1302. All the above info is provided assuming your blocks, pawls and worms are fine. If your reel (or problem) is different than I addressed, please post a video of the problem you're having and posting the link here, so I can check it out. Thanks.

@federicoalpi1110 Год назад

Very interesting video :) in the last part you talk about “testing for the shims” before closing the main body of the reel? How do you do it and where did you exactly place them? Between the bearing and the gear? Did you make any video about it? Anyway thank you very much, I’m learning a lot from your videos

@TSGReelService Год назад

You're welcome and thanks for watching! Yes, the shims are usually between the bearing and the main gear on the left side where you see the handle in this video. Sometimes, when you service a reel, there can be tightness/looseness when you reassemble, so you may sometimes have to play with the number of shims to get the feel right. Don't throw away any that you may remove. My testing is after I close the body... been doing it long enough to tell if it'll need adjusting without putting the body screws in. See this video for some additional help: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-6llggJX-LMY.html

@federicoalpi1110 Год назад

@@TSGReelService thank you very much ;)

@TSGReelService Год назад

@@federicoalpi1110 you're welcome and no worries. Happy to help when I can.

@markchuchra8399 3 года назад

Wow, great video. Very thorough. Quite worried I won’t be able to remember we’re all the different parts go and their orientations!

@TSGReelService 3 года назад

Thanks, and thanks for checking out the video! No worries, I know what you mean. If it seems a bit much for you to take on, you can check out second chance tackle here on RU-vid... he does a lot of simple, basic service videos and may have one on this reel. Or take it to your local repair shop and have them handle everything for you. More vids to come. Spread the word about the channel.

@samueltamayo8349 Год назад

Hey man great video I recently tried to clean it the same way and I lost that pin. What can I do to fix it ?

@TSGReelService Год назад

Thanks for checking out the video. Get a new pin? Use your schematics for the part number.

@rob6989 2 года назад

I recently changed the very noisy line roller bearing on my stradic fk and was told not to oil the bearing as its the quickest way to destroy it!! but I see videos of and they all seem to oil the line roller bearing. Could it be cos its a fixed bearing. Oil or not oil that is the question? Thanks and great videos

@TSGReelService 2 года назад

Thanks for watching! Don't oil that particular bearing. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-d1UfAxWQbxg.html

@alexharper4683 2 года назад

Hello, I have this same reel and I’ve used it a lot and have tried to take care of it but it’s nearly frozen and makes a lot of noise. How can I get you to service it?

@TSGReelService 2 года назад

It happens. You can email me at tsgreelservice@gmail.com and I'll let you know if I can help.

@fischercustombaits 3 года назад

OMG frozen here, frozen there. The parts are partially corroded. The fishing reel in poor condition. That is the way, when the angler neglects their reels. No money for maintenance . I always replaced the ball bearings, they are not that expensive these days. But I understand, the customer wanted to keep old ball bearings to save money. Good job though, you made it bud. NICE! ;-) Did the line roller work well? Greetings from Germany - Jan.

@TSGReelService 3 года назад

Hi Jan. Yes, the line roller bearing was good on this one. Funny enough, it was the only one of 6 reels he submitted that was fine. I don't think it was a matter of no money for maintenance... rather the classic scenario of if the reel feels okay, then I'll keep fishing it, even if it's noisier than when I first bought it. I suspect many of them in the lot were never serviced before. I'll usually try to save the bearings, if at all possible, but these were all pretty far gone.... should have just replaced the lower pinion when I did the other bearings, rather than trying to reuse it. The upside was the drags in all his reels were pretty good and didn't need replacing.... I'm guessing he paid special attention to this area of the reels, but not others.