Shop Heater, Electric Heaters for your Small Garage or Large Shop! 

Excellent as always sir. Now we can start getting back to resin casting and turning crap... Lol. but for real everything you do is awesome.

Hey Jake, Thank you so much for this video!! I have a 1200 sq. foot video studio with 18ft ceilings. The building has limited power options so I needed a single heater for the whole space. A buddy of mine (an electrician) and I followed your directions and suspended the unit 13 ft. off the ground. I was worried about the sound of the heater but it's not loud at all! We've had it up for about 2 weeks now and its awesome. Current outside temp is 32 degrees and 75 degrees indoors! Theirs minimal roll-off in heat in the corners -2 degrees max! I am thoroughly impressed with the product and very thankful for you video.

That should be a great upgrade for the shop. It'll make working in there better too.

Very nice I need electric heat for my shop..thanks for sharing ✌👊👊

Good stuff Jake! Stay warm and have a Merry Christmas!

So glad to see you got a heater 😊👍🏻

GREAT INFO JAKE .AWESOM VIDEO .MERRY CHRISTMAS TO YOU AND YOURS .FROM DOUG

Excellent video. I'm going to be adding an electric heater to my 30' x 40' shop. Looks like you helped me find the heater I need. Thanks and great video!

Nice job Jake! I work in a truck shop that heats with propane and has 18ft ceilings. We installed 3 ceiling fans, 55” size I think, and they have helped immensely to push that heat from the ceiling down to the work area. Might be an addition to consider.

Thanks Jake Keep up the great work! KB

Nice shop, good luck Jake 🍀👍

Nice shop upgrade!!! I’ll have to check into those heaters.

Nice addition! I'll be looking for the A/C upgrade video in about 5 months to slow the exothermic reaction on the resin as well. 😁

One day ill need a heater that big lol... nice one bud

Good Deal Jake, Merry Christmas Brother!

2,000 sq.ft. shop..... Lucky man 🤠

Cool. I don’t need a heater here on my island but neat post. Thanks, Jake. Merry Christmas!!

nice jake! be warm when im there next time, bit disappointed you didnt reinact the scene from flashdance while welding tho lol

Nice shop

For optimal performance of this heater, it calls for 6 awg wire and a 60 amp breaker.

That heater sure looked heavy when you were taking it up that tall ladder!!!

Awesome Jake i know what cold is here in Wisconsin. The wood doesn't even like it.

You are crazy. The depiction i sent you yesterday was accurate. Glad you're still alive!

Nice

Stay warm, you don't want that stuff to freeze. You probably don't want to freeze either

why use Pressure pot over Vacuum??.......totally unrelated, just thought id ask :D

Jake I’m new to resin casting. It’s chilly here in Delaware So I’ve been holding off on casting. I keep my shop at 57 And warm it up to 60-62 ish When I turn Can I mix epoxy and put in a pressure pot at 65? Then bring it in the house Cause I heat with a wood stove Nice and toasty KB!

Fuse block...lol

Red ends usually mean 1/4" steel

It has been almost 2 years..... are you still happy wirh this heater and the size you got? You spend a lot more time in the shop than you did when you made this video, is it still meeting your shop needs?

Hey jake, great video! How’s the heater going? Update? Recommend? Thanks Danny

hey man I was wondering if you noticed a big difference in your electric bill. Im Working with latex paint acrylic paints and polymer clay

Will this work with an existing 220 v outlet?

How many what's, what size breaker you use,thanks.

Good morning Jake Thanks for the quick response! I’ve got another question How long do you keep casting in a pressure pot? I do small projects For now. Like pencil holders in red solo cups. Thanks KB

ok just checking ,I have the same heater I just nstalled and It came on for 5 minutes and went off and have not had power after that ?

Hello I been looking at many youtube videos about this heaer and many people said their electricity went up quiet a bit:( If I buy this electric heater I will be only using it when I play pool in my garage which is once or 2x a month for about 6 or 7 hours. Since I have natural gas I wanted to install a natural gas heater but this sounds expensive to tap into the gas line or run a gas line to garage. However I think on the long run it will be cheaper that the electric heater??? Some people on you tube said it went up to $100 dollars a month others said about $30 or $40?? Anyways I will be installing a 240V outlet into my garage since I will also be getting a used electric car and need to charge it. So if I decide to get this electric heater I will already have an outlet for it. On the videos I see people installing the electric heater high in the ceiling usually on the corner. If i get electric heater can I just use an extension cord to plug it in or iwill it be better if I just install 240V outlet close to ceiling where heater will be?

Manufacturers fail to tell you that square footage and cubic footage are completely different an eight foot ceiling is do able with that heater not going to happen in that twelve/fourteen foot ceiling you have since heat rises. Installing fans overhead would more than likely not help.Your salvation will be the room you mentioned

did you ever relocate the temperature sensor? I just installed mine and the sensor is worthless in its stock location. I am thinking about moving it

I got two of the 7.500 heaters for my 30×40 shop do you think will work to keep me at 45 55 i have quail in my shop just need to keep water from freezing

How do you think the Heater you Installed would heat a 3 Car Garage Jake ? I just bought one from Northern Tool.

I just installed the same exact heater and I believe my fan is not turning as fast as it should. Yours sound much louder than mine. I cannot feel the fan/ heat any more than about 8ft away. How far can you stand in the path of the fan and still feel the heat?

I have a question. I installed a 7500w garage heater. I used the 8/2 gauge wire with an 40 Amp 2- pole breaker but when I turn on the breaker. It would shut off all the power and trip the 2-pole breaker. What would you think is the problem?

What cable size do u use and what was the breaker size and I have ch option on my box so not to sure what to do

For the cost of paying the gas company to come out and put gas to the shop you could probably run 3 of those heaters during the winter months.

Would this heater work for a 2000 sq ft greenhouse? Trying to keep it around 70 degrees

I have a gas well on my property so I get free gas for both my house and shop. Those electric heaters will kill almost any profits.

Does the heater turn off after 12 hours or can you set it at say 60 degrees and leave it on for weeks and it maintain the temperature? The description online isn’t very clear if it automatically turns off every 12 hours or if you have the option to set it between 1-12 hours. I had planned to use it in a shop where I have to have consistent heat, can’t have it dropping down to winter temps and then only being warm when I’m there. Will be days where I’m not there.

Did you end up using 3/4" or 1" conduit?

Did yours start blowing out really hot when you start it up? Mine seems just be warm and not hot :(

Why does my contactor keep over heating and blowing up change it twice already same problem?

Do you know how much it cost to run that heater consistently for a month?

Says 41amps on the box, you put a 40a breaker. Can’t load over 80%, 40x0.8=32.

8 gauge and 40 amp hmm 🤔

Would 10/2 wire work?

Hello, how much electric has this been using?

Your shop is more than 3 times the size of my apt... LOL *sigh*

Is that ok to install 50amp breaker for garage heater in a 50amp sub panel ?