Should you Install Batteries without Solar Panels

Подписаться 704 тыс.

Просмотров 10 тыс.

50% 1

In today's thriving solar installation market, electricians are taking on new roles as roofers, facing the challenge of fitting brackets to support solar modules and maintaining the waterproofing and structural integrity of the roof. However, there is an alternative approach worth considering. What if we could harness the benefits of battery storage without relying on solar energy?
In this week's episode of eFIXX TV, join us as we delve into this innovative concept with renewables expert Griff Thomas and the team from leading inverter manufacturer ‪@sunsynk‬ .
Follow Gary's Solar Battery journey.
👉 • SunSynk 3.6kW Ecco Sol...
Explore Solar & Battery training with GTEC
hub.efixx.co.uk/GTEC-Training
=============================================
Turn your scrap cable into cash! with Greencable
hub.efixx.co.uk/greencable
Complete our free health and safety training module
training.efixx.co.uk/course/t...
===================================
GET INVOLVED
www.efixx.co.uk/get-involved
====================================
Time Stamps ⏱
00:00 Welcome to eFIXX TV 01/11/23
03:25 Thanks to our sponsors
04:47 Introducing tonights' guests
08:30 Electricians' Challenge - Lee vs James
17:29 Placing them on the leaderboard
21:57 Gary's solar install
27:45 The difference between agile tariff and Gary's tariff
42:48 The SunSynk Innagator Series
52:00 Predicted energy storage capacity in and around Skipton
55:17 Where's Rick this week?
56:23 Rick's Tool Time
1:01:54 Placing the tool on the Tool Wall
1:07:58 The SunSynk LifeLynk
1:24:43 Ditch the flourescent tubes - New reinvention from Ledvance
1:27:41 Feed In tariffs
1:44:15 Gordon's been on holiday (again) What did he find?
1:49:01 James sweeps up
1:49:36 We've cashed our greencable bin
1:57:12 Roofers doing electrical work?
2:04:13 Comments Corner
1:09:53 Register and prizes
2:14:16 Thanks for watching - Roll the credits
======================================
#solarpanelinstallation #batterystorage #sunsynk

Развлечения

Опубликовано:

24 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 42

@eddie_pegasus_electrical 8 месяцев назад

Great show again Guys 👊😎👍💙, couldn't do the live 🙄 Back to Domino Ricky tool time. Had my first one of these work benches back in Feb 2017 (branded differently), two of them featured in some of your vids from our visit in April 2021. At the time I believe I paid about £50 each now about £70 inc VAT from an orange branded DIY store that not necessary do next day delivery, but you can do that there ye oldy thang by going to the store, picking up the item and pay for it on your exit of the store at a thang called a till (no basket required, but optional) which has a person standing at it (strange that!!). Catch you on the flip side. 👋

@retrozmachine1189 8 месяцев назад

Thought I'd clarify what I said during this stream about Aussie switchboards and MCB/RCD/etc brands. No one will blink if they see different brand devices in a board. There's nothing considered wrong with buying a clipsal enclosure (for a sub) or a hager metering enclosure (main switchboard) and fillling it up with Voltex RCBOs. What is expected though is that if you also put a CHiNT device in there it must mount up on the bus bar correctly. No bending the bar tabs, so putting a DPN pitch device on straight bars isn't acceptable. Neither would be trying to fit a device that has the terminals offset 5mm from all the rest. In that case you'd either start a new section of bar, or run wires to the CHiNT and not mount it on the bus bar at all. It's not a case of Rafterty's.

@efixx 8 месяцев назад

Thanks for the clarification we were about to box up our random stuff and sell it cheap on an Australian eBay account 😂

@VinoVeritas_ 8 месяцев назад

It's actually incorrect at 1:39:00 to say that a neighbour already having solar PV would prevent a G98 post installation notification. The DNO would only be concerned where a single installer is planning to install more than one solar PV system within the same geographical location in less than a 28 day period. This information can be found in sections 5.1 and 5.2 of EREC G98, Issue 1, Amendment 7.

@ricr8208 8 месяцев назад

I've had that Keter workbench for a few years. The bench itself is great, but the clamps are poor quality. Both my clamps handles snapped and only the Keter clamps fit in the bench so that feature is no longer available to me

@NicolasRaimo 8 месяцев назад

Easy money for sparks and bulbs... New car showrooms they are not allowed to change the fitting and most using old non led bulbs

@ianstanley5157 8 месяцев назад

I would be interested to hear what the manufacturer (Sunsynk) has to say about installing a 5.3 kwh battery (not IP 65 rated) in the toilet (no special zones to be considered) , would it be covered by the warranty and insurance?

@efixx 8 месяцев назад

Does the toilet have a bath or shower inside ?

@NicolasRaimo 8 месяцев назад

Sorry think I missed it how many batteries does Gary have?

@efixx 8 месяцев назад

by the end of the show he has two!

@SqwarkParrotSpittingFeathers 8 месяцев назад

I’ve had one for years. AMAZING. Or, GOOD.

@NicolasRaimo 8 месяцев назад

Had to hide his tool to slow him down!

@electrician247 8 месяцев назад

Roofing courses are available, Ive done a few myself. The truth of the matter is its a combination of efforts that is needed. Roofers should not be playing any part in the electrical system at all. The wiring installation, connection and termination is work of electricians. Any efforts to introduce skills cards for roofers to do any electrical work would be catastrophic. If that is currently happening it should be challenged and stopped. If trainers are encouraging short course options for roofers they should also be challenged and stopped. Lots of work to be done and personally we are loving the challenge in the thick of walking the walk. Perhaps with the advantage we have skills across varying construction trades earned the hard way.

@VinoVeritas_ 8 месяцев назад

You don't need to be an electrician to put factory fitted MC4 connectors together.

@electrician247 8 месяцев назад

@@VinoVeritas_ that depends if they are from the same manufacturer. If so of course. If not, definitely so. The limited value and attention people pay towards the MC4 connectors is why we see so many fail or burn out. Not the work for roofers that is for sure.

@VinoVeritas_ 8 месяцев назад

@@electrician247 Why would a roofer be mixing panels from differing manufacturers?

@electrician247 8 месяцев назад

@@VinoVeritas_ optomisers. Are you an installer? Doesn't sound like it tbh.

@VinoVeritas_ 8 месяцев назад

@@electrician247 Optomisers? You obviously mean optimisers. I've been installing since 2015. Again, a roofer would only be connecting factory fitted MC4 connectors. If SolarEdge or Tigo optimisers are being used, the replacement of MC4 connectors wouldn't be carried out on the roof and certainly not by a roofer.

@johnburns4017 8 месяцев назад

Oh No! The Liverpool car hub cap jokes. George Formby jokes next?

@efixx 8 месяцев назад

Shell suites - they insisted!

@ianstanley5157 8 месяцев назад

How safe is it, installing a lithium battery in a house never mind the toilet. If that installation was in South Africa it would have lit up like a nuclear bomb on social media. Do you have a fire door on the toilet :)

@JuanGonzales-or6pu 14 дней назад

you need editing, video is too long, difficult to follow the main points

@alsmith20000 7 месяцев назад

I suspect that the title of this video could be covered in a 5-10 minutes. I don't really have time to watch a two and a quarter hour long video just to find this one bit buried or spread out in there.

@kharalyaseen474 8 месяцев назад

Recite kalma Shahadat to accept Islam and Obey Prophet MUHAMMAD (PBUH) to achieve your own Heaven also forgivness from ALLAH at the day of Judgement. Convey this message to others Stay Blessed Ameen.