Sir I made a light board for teaching. I need to stand that. It is 6*4 feets with 5 mm thick. Can I use this method to make a stand. Do you have another method
1:42...That is a Gyford Combination screw assembled into a Wallboard Anchor. Gyford Part Number HD-AWB2 The Combination Screw is a Gyford manufactured part available at standoffsystems.com or Gyford distributors (LInk below). The Wallboard Anchor is available at hardware stores. www.standoffsystems.com/product/self-drilling-wallboard-anchor-assembly-2/ www.standoffsystems.com/product/516-18-to-8-combination-screw/ www.standoffsystems.com/product/self-drilling-wallboard-anchor-assembly-2/ www.standoffsystems.com/product/self-drilling-wallboard-anchor-assembly-2/
I have a question - Is this will be impossible to hanging on the wall 2m*1m large toughened glass painting, glass thickness 12mm, without frame and holes in glass?? And if, yes, then how i can do that? I will be very thankfull for your answer. Linda
Indeed, This can be achieved with standoffs. Edge grip standoffs may also be used If the glass is tempered and cannot have holes drilled into it without shattering. www.standoffsystems.com/products/standoffs/edge-grips/ We would need to discuss the hardware used, based on the attachment surface. Give us a call and we can work out the details. 775-829-7272
Linda Z. To answer your question: Typically 1 standoff every .6m. You may require 12 standoffs for this glass. Maybe less depending on the mounting surface.For accurate and free estimates. Please contact our tech lead: Robert Borden robertb@standoffsystems.com We need to know the mounting conditions, type of glass, or shape of glass edge. We will also confirm the weight of this glass with you.
Ivan Li, Before your glass door is manufactured you'll want to specify where the hole locations will be, as you cannot drill into tempered glass. IMPORTANT: We supply plastic tubing to go over the steel stud and protect glass or resin from chipping. If your glass does not have holes, Standoff Edge grips may be a solution. Here is a link : www.standoffsystems.com/how-to-guides/how-to-install-adjustable-edge-grips/ Also, Info@standoffsystems.com is where you can send us a rough sketch and we can open an in-depth dialogue about your project. Possibly adhesives and backer plates too. Thanks Ivan Li
Hi Rob - We are a wholesale company, and currently only sell to those individuals who have a resales or tax exempt license. To find an authorized retailer, click here: www.standoffsystems.com/retailers/
Irwansyha, For this install we use a self-drilling wallboard assembly (Gyford HD-AWB2) www.standoffsystems.com/product/self-drilling-wallboard-anchor-assembly-2/ They are 5/16-18'' thread.
Thanks Mustard Seed. Agreed these 1'' caps are a little large for this demonstration (or the art too small). We carry caps and barrels as small as 1/4'' diameter and up to 2-1/2'' low profile. Custom colors are available too, so the hardware can blend with the installation.
