Тёмный

Silver Pouring 2000° Silver into a Wooden Mold! EPIC! 

Silver Dragons
Подписаться 264 тыс.
Просмотров 21 тыс.
50% 1

In this video I film myself Silver Pouring 2000° Silver into a Wooden Mold! Ever since I started pouring silver I have wanted to do a wood pour. The lines on these pieces end up looking so great and I am loving the way that these wooden silver pours turned out! In this video I also show myself casting a pure silver golf ball as a bonus!
How to Make a Pure Silver Golf Ball
• Making a Pure Silver G...
Check out SD Bullion for GREAT DEALS on Silver and Gold!
sdbullion.com/dragons
Below are some AWESOME products that I use:
Inexpensive Scale for Weighing Silver and Gold
amzn.to/35sgcQW
Black Ring Capsules for most Silver Bullion Coins (38mm)
amzn.to/37oARH7
Black Ring Capsules for American Silver Eagles (40mm)
amzn.to/2s79Wj3
Gloves for Handling Coins
amzn.to/2QGCKJx
Paypal/Email:
silverdragons47@gmail.com
Also check me out on Instagram:
/ silverdragons47
If you want to mail me anything here is my address:
S. Dragons
P.O. Box 304
Gresham, OR 97030
Thanks for watching!!
Disclaimer: Some of the links are affiliate links where ill earn a small commission if you make a purchase at no additional cost to you.
Topics I cover in this video: silver pouring, pouring silver into wood, wood silver pour, pouring silver, silver pour, poured silver, wooden mold silver pouring, pouring 2000 degree silver, silver vs wood, wooden mold silver pour
#pouredsilver #silverpouring #silver

Опубликовано:

 

12 дек 2019

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 217   
@MrLookatmyhat
@MrLookatmyhat 4 года назад
So, two things I would recommend doing: 1. Sand the surface of the word. This stops splintering and if it comes from a blue or orange box store removes the factory varnish they spray on a a sealer. 2. Braze the entire board with a torch before you pour. This will stop the silver from skittering and popping as the surface water will already be evaporated and also acts to harden the wood. No need to recaste the first bar as well. My two cents
@philiplippens2690
@philiplippens2690 4 года назад
Do you know where to buy the equipment to melt silver with, and castings for a mold? Thanks
@SilverDragons47
@SilverDragons47 4 года назад
Elysium not a bad idea! someone else suggested baking the wood fist 🤷🏽‍♂️🔥🐉
@MrLookatmyhat
@MrLookatmyhat 4 года назад
@@SilverDragons47 that's a good idea. why not both? I could see maybe 200 degrees for an hour in the oven then harden off the surface gently with a torch. The popping of the molten metal looks very dangerous and is, of course, caused by moisture in the wood rapidly evaporating. Not only that you will inevitably not recover all of the silver that flys everywhere. I could be wrong and maybe wood will do this regardless of the precautions, but it would be interesting to see the contrast reaction of baked and torched wood vs untreated if any as well as the life of the mold.
@MrLookatmyhat
@MrLookatmyhat 4 года назад
@@philiplippens2690 devil-forge.com/gas-furnaces/38-fb1sb.html Is the furnace I have. bigstackD Casting does videos with one. You can buy molds and a proper crucible on amazon. Likewise you can watch TheKingofRandom's video on a inexpensive diy foundry. I'd also watch The Essential Craftsman for some handy tips about smithing work before committing to anything. Note: NEVER melt or heat up galvanized anything. Extremely toxic. Do your research before anything and have fun melting stuff!
@philiplippens2690
@philiplippens2690 4 года назад
@@MrLookatmyhat Thanks very much for the advice and where to buy. 👍
@mrsawyer186
@mrsawyer186 4 года назад
Good timing my friend they just showed up yesterday afternoon in the mail. Awesome job they came out just like I thought they would. Thanks again. I'm working on the next project now...
@SilverDragons47
@SilverDragons47 4 года назад
Mr sawyer i’m glad they made it there and that you like them! thanks for the opportunity my friend!!! I had so much fun with this project 🔥🐉
@pierredubord
@pierredubord 12 дней назад
I realize this is an old video but first time I’ve seen it and that was really cool! You are a master of the art Mr. Dragons!
@brockshields9336
@brockshields9336 Год назад
The third bar looked like a whole shell peanut 🥜. The sprue made a nice stand for the golf ball. What great fun on the castings!
@ScotsSilver
@ScotsSilver 7 месяцев назад
This only just now popped into my feed. What a fantastic effect 😮.
@rubberduckymetal4270
@rubberduckymetal4270 Год назад
That bar is awesome! I’m hundred percent hijacking this idea, with respect of course lol
@eltonjones7392
@eltonjones7392 4 года назад
I like the second one better, because it came out better
@darcybrawataakaontariostac6835
@darcybrawataakaontariostac6835 4 года назад
Great pours love the Golf Ball
@juliusnewman2094
@juliusnewman2094 3 года назад
The golf ball is my favorite by far.
@nerotikzombie
@nerotikzombie 4 года назад
This video was SOOO cool to watch!! Thanks Silver Dragons! You Sir, are an ArTEEEEST!!! That was BADASSERY!!
@SilverDragons47
@SilverDragons47 4 года назад
nerotikzombie thanks I had a lot of fun making it! 😁🔥🐉
@SilverOceans
@SilverOceans 3 года назад
@Silver Dragons pouring into that wood was really cool! I've never seen anything like that before. Honeycomb is exactly what I was thinking too! Great job!
@SilverLimey79
@SilverLimey79 4 года назад
Wow that detail is fantastic!! 😳
@SilverDragons47
@SilverDragons47 4 года назад
SilverLimey 79 yeah I can’t believe the finish!!! 🔥🐉
@cpphool
@cpphool 4 года назад
Great video, thank you for all the work! But please keep that music low, my ears almost died ;)
@glevy17
@glevy17 4 года назад
Awesome pour! Antiqued bar looks really nice.
@SilverDragons47
@SilverDragons47 4 года назад
Greg Levicoff thanks a bunch! that was my fav as well 😜🔥🐉
@kingbeestacker873
@kingbeestacker873 4 года назад
I love these bars Silver dragons. Great content and work all around.
@SilverDragons47
@SilverDragons47 4 года назад
SILVERDRAGON STACKER Thanks so much my friend!! 🔥🐉
@SilverLimey79
@SilverLimey79 4 года назад
Wow interesting... Glad to see you venture into other projects. Congrats buddy. 👍
@SilverDragons47
@SilverDragons47 4 года назад
SilverLimey 79 thanks a bunch my friend! it was a fun project 😁🔥🐉
@Silver_Coin_Outdoors
@Silver_Coin_Outdoors 4 года назад
This is really cool! This is one of those times that makes me want to start pouring. Have a mold of my own to pour and maybe sell. Just thinking out loud. Also, to me it looks like dragon/reptile scales.
@SilverDragons47
@SilverDragons47 4 года назад
Silver Coin Outdoors Thanks so much my friend!!! you should do it!!! 🔥🐉
@viking4jesus875
@viking4jesus875 4 года назад
Very cool! Thanks for sharing SD!
@SilverDragons47
@SilverDragons47 4 года назад
Viking4Jesus Thanks so much my friend!! 🔥🐉
@kevinbelcher5241
@kevinbelcher5241 4 года назад
I'm a pyro so this was very fun to watch . . Bar looks like a brain. Love it.
@SilverDragons47
@SilverDragons47 4 года назад
Kevin Belcher thanks! it was burning quite a bit 😂 I love it as well 🔥🐉
@bjdenney
@bjdenney 4 года назад
That looks amazing. I need one of these in my stack!
@SilverDragons47
@SilverDragons47 4 года назад
Benjamin Denney Thanks so much my friend!! i’ll have to make more 🔥🐉
@gregorygibson5455
@gregorygibson5455 2 месяца назад
Awesome pours
@SilverPunkPour
@SilverPunkPour Год назад
Whoa! that is cool my friend! gotta give this a try, gonna find some solid old oak and give it a pour!
@sterlingcannabis
@sterlingcannabis 4 года назад
I love the wood pours. That makes two reasons I need to get a Dremmel.
@SilverDragons47
@SilverDragons47 4 года назад
Sterling Cannabis lol you NEED one for sure 🔥🐉
@matthewanderson3261
@matthewanderson3261 4 года назад
Gorgeous! I love those wood molded bars. So cool, man. ^_^
@SilverDragons47
@SilverDragons47 4 года назад
Matthew Anderson thanks a bunch my friend! I love em as well!! 🔥🐉
@silvertaniwha1314
@silvertaniwha1314 4 года назад
😍🤙👍 WOW love the wood pours bro. Super cool video dude. This is definitely on my list of things to do.
@SilverDragons47
@SilverDragons47 4 года назад
Silver Taniwha Thanks so much my friend!!! you should do it for sure!!!! 🔥🐉
@fhbbi
@fhbbi 4 года назад
Unique gift for golfers! Great workmanship skill! - Joey From Seattle
@SilverDragons47
@SilverDragons47 4 года назад
Joe Costello Thanks so much my friend!!! 🔥🐉
@silverdamsel3139
@silverdamsel3139 4 года назад
Nature really makes beautiful molds! 💙💙💙
@SilverDragons47
@SilverDragons47 4 года назад
Silver Damsel oh it does for sure!!! I love it!! 🔥🔥🔥🔥🔥🔥🐉
@rogers8381
@rogers8381 4 года назад
Wood pours are awesome!! The only ones I have in my collection are 2 that JAAS made for me and they are amazing!! Have fun with it buddy!
@leahannwhite1111
@leahannwhite1111 6 месяцев назад
REALLY COOL!! 👍💓
@73ajd1
@73ajd1 4 года назад
3 more awesome pieces! Antiquing 1 bar and leaving the other raw is nice.
@SilverDragons47
@SilverDragons47 4 года назад
New Way thanks! yeah that is what he wanted 😏👍🏽🔥🐉
@0suplex0
@0suplex0 4 года назад
A video using the golf ball would be entertaining af
@SilverDragons47
@SilverDragons47 4 года назад
Jumex Suplex lol maybe i’ll try one in the future 😂🔥🐉
@YankeeStacking
@YankeeStacking 4 года назад
Sweet vid, bro! Very cool to watch. 😄👌🏼
@SilverDragons47
@SilverDragons47 4 года назад
Yankee Stacking thanks Yankee it was fun to make 😁🔥🐉
@jonathandavis6571
@jonathandavis6571 4 года назад
Dude!! You should make a golf ball and leave the portion you cut off on. Twould make for a great stand for the mantle or desk
@SilverDragons47
@SilverDragons47 4 года назад
Jonathan Davis you mean like this one? 😂 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-YTbmCWDhfm0.html
@jonathandavis6571
@jonathandavis6571 4 года назад
Silver Dragons Dangitt!! I thought I had a novel idea lol How many oz’s would I need to send you to git you to make one for me? I’d send you a constitutional silver gift of course for your time and expertise
@SilverDragons47
@SilverDragons47 4 года назад
Jonathan Davis they take a good amount of work... shoot me an email if you want and we can work it out! silverdragons47@gmail.com
@JustAnotherAverageStacker
@JustAnotherAverageStacker 4 года назад
Love wood pours!
@SilverDragons47
@SilverDragons47 4 года назад
JustAnotherAverageStacker thanks I love em as well!!! 😁🔥🐉
@saltygrandpajoe6375
@saltygrandpajoe6375 4 года назад
That is absolutely beautiful
@SilverDragons47
@SilverDragons47 4 года назад
Grandpa Joe Thanks so much my friend!!! 🔥🐉
@veritasfiles
@veritasfiles 4 года назад
Awesome pours!
@SilverDragons47
@SilverDragons47 4 года назад
veritasfiles thanks so much!! 🔥🐉
@clavacats2991
@clavacats2991 4 года назад
soo freaking cool. wouldn't have thought wood would be able to hold shape at those temps.
@SilverDragons47
@SilverDragons47 4 года назад
Tori G it is cool for sure!!! I was pretty sure it would work as I have seen other people do it before me 😏🔥🐉
@jlunaro
@jlunaro 4 года назад
cool technique. the result is really unique.
@SilverDragons47
@SilverDragons47 4 года назад
Jorge Luna Thanks so much! I agree!! 🔥🐉
@fiatdestroyer9716
@fiatdestroyer9716 4 года назад
Super fun pour!🔥🔥🔥
@SilverDragons47
@SilverDragons47 4 года назад
Fiat Destroyer thanks a bunch Fiat Destroyer!!! 🔥🐉
@ziaadabrahams
@ziaadabrahams 4 года назад
So awesome
@SilverDragons47
@SilverDragons47 4 года назад
Ziaad Abrahams Thanks so much my friend!! 🔥🐉
@rosaaguirre7382
@rosaaguirre7382 4 года назад
Awesome work. I love unique pours.
@SilverDragons47
@SilverDragons47 4 года назад
ROSA agUIRRE thanks and I really love them as well!!! 🔥🐉
@rosaaguirre7382
@rosaaguirre7382 4 года назад
@@SilverDragons47 I need a legion sticker . Do I buy one or how do I get one. I am part of the 47 legionnaires 🤙🤙🤙🤙🤙
@SilverDragons47
@SilverDragons47 4 года назад
ROSA agUIRRE I will be sending them out with all of the pours ordered from the January 3rd pour party and I have a big version in my merch store 👍🏽 that’s all I have right now 🔥🐉
@whimsymaker
@whimsymaker 4 года назад
These are awesome!
@SilverDragons47
@SilverDragons47 4 года назад
Whimsymaker Thanks so much my friend!!! 🔥🐉
@barbarag.seaverson4790
@barbarag.seaverson4790 4 года назад
That second one was fantastic.
@SilverDragons47
@SilverDragons47 4 года назад
Barbara G. Seaverson thanks a bunch! I had fun with them 😁🔥🐉
@dustyroads6466
@dustyroads6466 4 года назад
Cool video Silver Dragons. I've been wanting to do this too.
@SilverDragons47
@SilverDragons47 4 года назад
Dusty Roads thanks! you should give it a try it is quite fun 😁🔥🐉
@dustyroads6466
@dustyroads6466 4 года назад
I made a furnace by cutting a 55 gallon Harley Davidson oil drum down to a little above half. Added a couple layers of thermal blanket with refractory cement over that. The homemade LP burner is a super simple design which uses a hair drier for forced induction. A low setting is just right, while high pushes the limits of what my cement can handle. I'm using a large salamander graphite crucible at the time, but it's been used primarily for copper. The problem I have in using silver is that the crucible I have is so small. My plans are to do the Oak mold in copper. I can't wait. It's going to be awesome.
@puvagirl03
@puvagirl03 4 года назад
That is so cool! love the video! see you somewhere soon my friend!
@SilverDragons47
@SilverDragons47 4 года назад
Victoria Roman Carter thanks! see you on the tube! 👍🏽🔥🐉
@silverwheelspatriot1764
@silverwheelspatriot1764 4 года назад
Awesome pouring
@SilverDragons47
@SilverDragons47 4 года назад
Silver Wheels I had fun with it 😁🔥🐉
@RMokros
@RMokros 4 года назад
Great video.
@SilverDragons47
@SilverDragons47 4 года назад
Professor Statisyahu thanks my friend! 🔥🐉
@normal_norm2627
@normal_norm2627 4 года назад
LOVE THE MUSIC SD !!! 😎😂
@SilverDragons47
@SilverDragons47 4 года назад
Normal_ Norm thanks! party time 😂🔥🐉
@StacksStuff
@StacksStuff 4 года назад
Very cool stuff!
@SilverDragons47
@SilverDragons47 4 года назад
Stacks & Stuff thanks a bunch my friend!! 🔥🐉
@rippyj
@rippyj 4 года назад
That’s sick
@stackattackerwager2541
@stackattackerwager2541 4 года назад
Sweet pours kinda reminds me of the tombstone bars that golf ball is a nice piece there
@SilverDragons47
@SilverDragons47 4 года назад
stack attacker Wager thanks a bunch and I can see it! 👍🏽🔥🐉
@mikeyox-yoxdesigns773
@mikeyox-yoxdesigns773 4 года назад
That's my golf ball you just watch the Dragon pour and believe me, it's even cooler in person!
@SilverDragons47
@SilverDragons47 4 года назад
Mike Yox lol it was a fun pour my friend! 👍🏽🔥🐉
@bruceliggett8036
@bruceliggett8036 4 года назад
So awesome man! The Silver golf ball is epic!! Imagine doing a Silver basketball, how cool would THAT be!! lol
@SilverDragons47
@SilverDragons47 4 года назад
Bruce Liggett lol a basketball would be like 6 figures 😂😂😂🔥🐉
@silvernuts3196
@silvernuts3196 4 года назад
Burn baby burn... for the love of art 💥
@SilverDragons47
@SilverDragons47 4 года назад
Silver Nuts I love it too my friend 😁🔥🐉
@kornkobbler1
@kornkobbler1 10 месяцев назад
That is sweet
@natesandoval6917
@natesandoval6917 4 года назад
Those are awesome! Dragon skin haha.
@SilverDragons47
@SilverDragons47 4 года назад
Ninja Stacking lol oh Dragon skin for sure!!! 🔥🐉
@TomokosEnterprize
@TomokosEnterprize 4 года назад
This is great bud. It's neat to see you wandering around in different pouring mediums. My mentor, "Ag Ender" is in my eyes the king of wood pours. He always had a can to cover the wood pours that keeps the topside of the pours nice and with a lot fewer dimples and shaky things on them. Check him out son.He was monumental for getting me going when I first started pouring. Like this I have done a number of sequential wood pours for various folks. Number them so they can see them change from pour to pour. I finally now have all the bolt cutters from 8 to 42 inch. The big boy will chew up a 10 oz bar in no time so I don't need to make near as much shot as I used to. Well bud, , , What a fun post. Great to see you doing pours from different molds than just graphite. WOOHOO ON YOU SON !
@philiplippens2690
@philiplippens2690 4 года назад
Where do you buy the equipment to do this with? Thanks
@SilverDragons47
@SilverDragons47 4 года назад
Tomoko's Enterprize i’ll have to check him out thanks for the tip my friend!!! yes now I have done clay, graphite, water, and wood. I wonder what is next 😏🔥🐉
@SilverDragons47
@SilverDragons47 4 года назад
philip lippens ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-jW0YX1e0gxk.html
@TomokosEnterprize
@TomokosEnterprize 4 года назад
@@SilverDragons47 Shoot for the moon son. Who knows maybe you will discover some new medium to pour into no one else has tried eh.
@philiplippens2690
@philiplippens2690 4 года назад
@@SilverDragons47 Thanks 👍
@womblestacker7993
@womblestacker7993 4 года назад
Very cool
@SilverDragons47
@SilverDragons47 4 года назад
Womble Stacker Thanks so much my friend!! 🔥🐉
@_Gundy_
@_Gundy_ 3 года назад
Can you revisit this idea! maybe have a custom design routered out of the wood! Cool video!
@jimmyfortrue3741
@jimmyfortrue3741 4 года назад
I have to wonder if different types of wood would give any significantly different results... For example mahogany or teak with very tight woodgrain. The oak you used seems a great first time choice... Also wonder if a wood burning pen for pyrography would allow you ( or others) to add artistic elements to the bars... Just some thoughts... Great video.... BTW
@JohnnySwedishScrapper
@JohnnySwedishScrapper 4 года назад
awsome, ;) just mabe my second ingont of 925 silver bar ;) nice video ;)
@SilverDragons47
@SilverDragons47 4 года назад
Johnny Björkdahl nice and thanks!! 👍🏽🔥🐉
@gregorygibson5455
@gregorygibson5455 2 месяца назад
Hello Silver Dragons
@seabeepirate
@seabeepirate Год назад
Neat. Maybe pre-toast the wood with a torch so the first pour isn’t so bubbly?
@ThatBeardedVeteran
@ThatBeardedVeteran 4 года назад
Those are amazing. The golf ball looked like it was on a tee before you sniped off the excess from the poor. Would be cool to display it like that in my opinion.
@SilverDragons47
@SilverDragons47 4 года назад
That Bearded Veteran like this one 😏 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-YTbmCWDhfm0.html
@roland3011
@roland3011 4 года назад
Nice work! Cooler than the scottsdale nuggets.
@SilverDragons47
@SilverDragons47 4 года назад
Silver Fox thanks I really appreciate that!! 🔥🐉
@charlesdavis7461
@charlesdavis7461 4 года назад
Fascinating, even slow motion is fast.
@SilverDragons47
@SilverDragons47 4 года назад
charles davis lol yeah it’s crazy how it looks 😏🔥🐉
@MrSkrilla316
@MrSkrilla316 Год назад
I'm guessing the splattering on the first pour is due to moisture in the wood? Likely has gas pockets? Can you pre-char the wood to reduce the moisture? Also prevent some of the excess burning?
@lancemillward1912
@lancemillward1912 Месяц назад
I think slightly scorching the wood with a blowtorch would reduce moisture and the silver spitting out
@SIXPACK110
@SIXPACK110 8 месяцев назад
A sand mold of a corncob would probably be cool
@barriobob1
@barriobob1 4 года назад
Great vid! Would love a quench cam.
@SilverDragons47
@SilverDragons47 4 года назад
Robert H lol I know I need one 😂😂😂😂🔥🐉
@roczilla2405
@roczilla2405 4 года назад
Nice wood pours love the golf ball too who has one of his golf balls ?
@SilverDragons47
@SilverDragons47 4 года назад
Roczilla 😂😂😂 i’m not sure how many golf balls are out there but it’s less than 10 🔥🐉
@tomsrandomness
@tomsrandomness Год назад
Interesting. Bybee made that 30 ozt sphere but you did it first witha. Golf ball lol
@eltonjones7392
@eltonjones7392 4 года назад
I liked that golf ball, I would have bought it if you have not cut the leg of the golf ball
@stackingpoints417
@stackingpoints417 3 года назад
I was wondering why he clipped that as well
@AridiumInsane
@AridiumInsane 4 года назад
Would it just be easier to use copper or aluminium first and then on the final pour use silver? Just thinking saving having to dredge impurities out of the first two pours of silver on remelt?
@krism2746
@krism2746 10 месяцев назад
Do you always use quarter sawn? Have you tried flat sawn? If so, how were the results? Thanks.
@TheGhostQuarter
@TheGhostQuarter Год назад
I'm sure by now you know why the mold was spitting as you did mention that before. I say this more for the casual scroller. The reason why is due to the water content in the wood. As it heats up it causes the water to evaporate which then creates gas causing the silver to "spit". This is an interesting idea but if I made a suggestion id say next time to heat the hole in the block of wood before casting to prevent the moisture issue. Probably not going to do a ton but the first pour probably wont be as violent as this one.
@johnm1008
@johnm1008 4 года назад
Oh the humanity!!! Dragon tears everywhere.
@SilverDragons47
@SilverDragons47 4 года назад
john m 😂😂😂😂 he was weeping! 🔥🐉
@philiplippens2690
@philiplippens2690 4 года назад
Where do you buy the equipment to melt silver with, and how do you make a mold? I've thought about doing it for years. Thanks
@SilverDragons47
@SilverDragons47 4 года назад
philip lippens mostly ebay and amazon... good luck!! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-jW0YX1e0gxk.html
@mrtstacking6242
@mrtstacking6242 4 года назад
How do I use a torch to burn the board first in the second one usually comes out good
@SilverDragons47
@SilverDragons47 4 года назад
Mrt Stacking yeah that is not a bad idea at all... thanks!! 🔥🐉
@kingbeestacker873
@kingbeestacker873 4 года назад
You know what would make that golf ball? A gold tee. Oh Yeah.
@SilverDragons47
@SilverDragons47 4 года назад
SILVERDRAGON STACKER 😂😂😂 maybe someday i’ll make one. gemini silver made me a silver tee 🔥🐉
@BrandonCurryChannel
@BrandonCurryChannel 4 года назад
I'll second the idea of spanking a silver golf ball with a club. You should probably borrow your neighbors clubs for this tho😜
@SilverDragons47
@SilverDragons47 4 года назад
Brandon Curry 😂😂😂 iv got some old clubs i’ll give it a go. 🔥🐉
@bryanwoodard1240
@bryanwoodard1240 4 года назад
Yeah thats pretty epic lol
@SilverDragons47
@SilverDragons47 4 года назад
Bryan Woodard thanks I agree 😁🔥🐉
@LivePastHealthy
@LivePastHealthy 4 года назад
Do you have a website were you sell your silver creations? Wondering how much you sell your silver for over spot? Really love the wood molds.
@SilverDragons47
@SilverDragons47 4 года назад
psychout I do not I sell my pours right now live. my next party will be on January 3rd 👍🏽 I charge $28 per ounce with free shipping. these were all trades 🔥🐉
@LivePastHealthy
@LivePastHealthy 4 года назад
@@SilverDragons47 - I'll make sure to watch on Jan 3rd, beautiful pieces.
@mycorrhizae1832
@mycorrhizae1832 4 года назад
3rd one looked like a flatten silver bar planters nut.
@SilverDragons47
@SilverDragons47 4 года назад
Bobby Parks lol it kinda did 😂🔥🐉
@straycat1674
@straycat1674 3 года назад
Now if you melt something that’s maybe Sterling or less than .999, do the impurities burn off?
@silverwheelspatriot1764
@silverwheelspatriot1764 4 года назад
Look at those little spider cracks
@SilverDragons47
@SilverDragons47 4 года назад
Silver Wheels or Dragon scales! 😜🔥🐉
@LOVE2Flute
@LOVE2Flute Год назад
That’s money 💰
@chekoz77
@chekoz77 4 года назад
I hate you guys. It was bad enough all these vids got me addicted to stacking. Now you had to go and start pouring bars. Now I am searching for a furnace and molds. I really didnt need another addiction!
@TomokosEnterprize
@TomokosEnterprize 4 года назад
It is a vise like no other bud !
@SilverDragons47
@SilverDragons47 4 года назад
Aquarium Samurai 😂😂😂 this one will suck you in my friend. it’s a lot of fun though 🔥🐉
@CarolusLXIII
@CarolusLXIII 6 месяцев назад
Looks like EPCOT- the ball.
@AdolfoCardoza777
@AdolfoCardoza777 4 года назад
Hi Silver dragon I'm new to your channel
@SilverDragons47
@SilverDragons47 4 года назад
Adolfo Cardoza welcome to the 47th Dragon Legion my friend! 🔥🐉
@AdolfoCardoza777
@AdolfoCardoza777 4 года назад
@@SilverDragons47 thank you
@endervanes3327
@endervanes3327 4 года назад
hello I will have a question ... Which oven do you use? can i have the link :)
@jakescorpion1
@jakescorpion1 2 года назад
Second one would have made a cool pendant
@ABESLIN
@ABESLIN 3 года назад
Do u sale any of your silver pieces u make..
@SilverDragons47
@SilverDragons47 3 года назад
yeah www.silverdragons47.com 🔥🐉
@allenj1996
@allenj1996 4 года назад
Are you able to sell them pouring your own? And if so where?
@SilverDragons47
@SilverDragons47 4 года назад
jaylen allen yeah I sell them to people on youtube and instagram 🔥🐉
@JR-gw3by
@JR-gw3by 4 года назад
I'm no silver pourer but maybe if you burned the wood with a torch 1st like the molds so the silver doesn't pop and spit out everywhere
@SilverDragons47
@SilverDragons47 4 года назад
Jonathan Reese yeah probably or maybe if I just bake the wood 🤷🏽‍♂️🔥🐉
@rewtdawg9852
@rewtdawg9852 3 года назад
I thought you were rich spilling all that silver until I looked at the date
@barbarag.seaverson4790
@barbarag.seaverson4790 4 года назад
The one on the right is best and I would've left the golf ball on the T.
@kevinr206
@kevinr206 4 года назад
Agree! I like the ball on the tee!
@SilverDragons47
@SilverDragons47 4 года назад
Barbara G. Seaverson you mean like this one 😁 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-YTbmCWDhfm0.html
@SilverDragons47
@SilverDragons47 4 года назад
Kevin R check out this one! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-YTbmCWDhfm0.html
@barbarag.seaverson4790
@barbarag.seaverson4790 4 года назад
@@SilverDragons47 Absolutely. I love it.
@cokemillion
@cokemillion 3 года назад
I thought you would of tapped the wood to get the ripples on the back side.
@JW02828
@JW02828 4 года назад
I really like the Golf ball. Are you willing to sale the golf ball???
@SilverDragons47
@SilverDragons47 4 года назад
J W thanks a bunch! shoot me an email and I can make you one 👍🏽 silverdragons47@gmail.com this one is sold 🔥🐉
@emilandteresakamar7770
@emilandteresakamar7770 4 года назад
Call that dragon skin
@SilverDragons47
@SilverDragons47 4 года назад
Emil and Teresa Kamar yeah that really is the best name 😜🔥🐉
Далее
▼КОРОЛЬ СОЖРАЛ ВСЕХ 👑🍗
29:48
Просмотров 393 тыс.
Чистка пляжа с золотом
00:49
Просмотров 302 тыс.
Silver Cell Harvest Hand Poured Silver Bar
30:03
Просмотров 199 тыс.
What Happens if you MIX ALL The METALS Together?
19:47
How to Make a Silver Bar (No Step Skipped)
13:09
Просмотров 101 тыс.
The Most Underrated Ancient Projectile
14:49
Просмотров 469 тыс.
How To: Silver Pouring Into Wood Molds
10:13
Просмотров 51 тыс.
Burning 50lbs of Thermite Made From 400 Soda Cans
24:57
▼КОРОЛЬ СОЖРАЛ ВСЕХ 👑🍗
29:48
Просмотров 393 тыс.