Silverado Sierra 5.3 & 6.2 Belt Replacement (2014-2019)

Подписаться 57 тыс.

Просмотров 238 тыс.

50% 1

If you have found this video helpful, and you wish to donate to me, follow this link!! its easy!!
paypal.me/aaronhinesauto?loca...
Follow this channel on twitter for the latest content updates and weekly Automotive Tips!!
AutoHines?lang=en
In this video I go over the steps and procedures to replace all three belts on a Chevy Silverado or GMC Sierra. Equipped with the 5.3 and 6.2 L ecotec3 engines. The larger belt which is a serpentine time is tension by an automatic spring type tensioner. AC compressor and vacuum pump are driving separately off of stretch tape else which require a special tool for installation. Special tool can be purchased from O’Reilly Napa or Carquest auto parts centers. I hope this video helps helped you out if it has please like and subscribe. If you have any questions or comments feel free to leave something in the comment section. Thank you for watching and below are a list of tools That I have used in this video.
PARTS USED IN THIS VIDEO:
SERPENTINE BELT:
www.oreillyauto.com/detail/b/...
VACUUM PUMP BELT:
www.oreillyauto.com/detail/b/...
A/C BELT:
www.oreillyauto.com/detail/b/...
STRETCH BELT INSTALLATION TOOL:
www.oreillyauto.com/detail/b/...

Авто/Мото

Опубликовано:

25 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 120

@990rallen 12 дней назад

I followed this video word for word,had no problems with installing belts on my 2017 Denali. Thanks for the great advice 👍

@billn911 3 года назад

Glad I watched, I was just going to order 2 belts didn't even realize there was a third hidden in there. Thank you!

@furmanparton6740 5 лет назад

I really hate that you lied to us and said the truck had over 100,000 miles on it when it was 2 miles shy of 100,000. Lol. Just messing with you. Great video! This will help me out tomorrow.

@MrCamaroSR 2 месяца назад

Thanks for this easily explained video. Just replaced all 3 belts in less than 45 mins. Your instructions were clear and easy to follow.

@BSkull-fv2yb 3 года назад

just changed my belts and belt tension following this guide! thank you so much. took less that 1 hour for all 3 belts!

@rolandomello7111 9 месяцев назад

Thank you, sir, for saving me money! Took me about two hours to change all three belts plus the tensioner but definitely worth it. Keep up the good work.

@rickfrierson6166 4 года назад

Replaced ac and serpentine belt on '13 5.3 Chevy 4wd. The trick for ac belt was awesome and had both belts replaced in 10 min.

@Lenny5160 Год назад

Great guide! Did this from the top and also changed the tensioner in exactly 30 minutes. Thank you!

@PedroDancing 5 лет назад

Very good video I had replace the AC belt before and it also has a special tool to install the stretch belt. but the way you installed it with the zip tie look pretty easy as well. Thanks

@craigstephens4318 4 месяца назад

Done. I did all three belts this morning. Thanks for the video -- it helped a LOT. My A/C belt also came with a tool and was very helpful without having to use a zip tie.

@CYBERKHAN 4 года назад

Used your video to replace the AC and AP belts. The special tool worked as shown holding the AP belt on its’ pulley. Working on these two particular belts from the top side prove to be harder than if done from below whilst on a lift or ramps. But, thanks for the know how on this maintenance task.

@daviddominguez4076 2 года назад

Very straight forward and good video angles of the work being performed. Thanks for making the video.

@dileriousone 4 года назад

For anyone looking and curious if it works for the 4.3L (6-cyl). I can tell you this works perfectly for that engine as well. There's only one of the plugs to pop off (with the gray depress button). For my I was only replacing the AC belt, so I had to pop the serpentine belt off prior to installing it. Pop the serpentine belt back on once done and you're good to go. I used the AC Delco belt ordered from Rock Auto and it came with a stretch belt install tool that worked perfectly. But the zip ties are great for anyone that doesn't get the tool and needs to get the belt on. Thanks for the perfectly descriptive video.

@georgeleon7747 5 лет назад

great video.Answers my question on when to change belts.Love my gmc, just very disapointed with towing capacity having 3.08 ratio.

@mrortegon1 5 лет назад

You made it look easy. Thanks for the video.

@valvebuna7 5 лет назад

Bro I just changed my serpentine belt. Your video was really helpful. Thank you

@AaronHinesAuto 5 лет назад

im glad it helped you out!

@maltisseMMA 2 года назад

Thanks much great video! Man the engineers at GM must have been having a wonderful time during this model range lol.

@mhunskor 4 года назад

Thorough and overall excellent video. Worked for me no problem.

@raulvega1623 2 года назад

Great video, I have a 2015 Silverado with a 5.3 L I'm glad I watched this.

@jeromecarr6677 2 года назад

Thanks for a direct to the point video

@fredybueso 2 года назад

Well explained brother, all clear a understandable. Thanks!

@dennisranck1613 2 года назад

I have watched your video before. I decided to watch it right now as I am doing my belts. As it turns out, I did not have a zip tie long enough for your trick. So I did use two zip ties stuck together. In doing this, one of the flaps got stuck underneath the vacuum belt. I simply turned the crank until it was loose. And then when I went to do the main belt, I did not take a picture or remember the orientation of the belt, and I did have to consult this video several times to get the orientation proper. Everything did go fairly smooth. Thank you for the video.

@frankburkett7453 10 месяцев назад

from past experience, I always draw a belt diagram before removing any belts

@jfolena9697 8 месяцев назад

Great video. Like that you showed all angles

@tylerrobbins9126 2 года назад

Thanks. Got it done in under 40 min 😃

@charlescockley7610 Год назад

Great video! I just discovered my new 2016 Silverado has 3 belts.. thanks

@dennisranck1613 2 года назад

I am by no means. Matter-of-factly I did help my nephew do the serpentine belt in his Cruze, believe it or not, I did need to unbolt one of the motor mounts, ridiculous. I am now tasked with replacing the belt on my 2014 Chevrolet Silverado I have not done a bunch of research, but I was not aware of that third belt. I was also unaware that there was a stretch fit belt even available. This will help me. Thank you. This video, is put together very well.

@davidriggins1591 4 года назад

Awesome, easiest I've ever installed a stretch it belt 30 cent ziptie

@RobHughes-oh3yg 11 месяцев назад

Thank you this was very helpful

@amishdinkledork 2 месяца назад

10/10 you are doing gods work here friend.

@Alex-xw5ld 8 месяцев назад

Nice video just the facts nothing but the facts. I did it fast and perfectly. Thanks

@dmandol Месяц назад

Great video. Very helpful!

@lancediaz866 5 месяцев назад

Excellent video!

@jonwick1396 2 года назад

Excellent video

@leopedroza8462 4 года назад

Thanks for the video, you save some money for me My question is what about belt dressing Some people said is bad other people said is good

@tobygagnon1443 4 месяца назад

Good video. It was very helpful. Thanks.

@nickhorn681 Год назад

Great video! Thanks!

@alexgonz5550 4 года назад

My hero.....I can’t believed.....👍👍👍👍👍👍

@VictorCutzal-js2rn Год назад

Nice work

@williefair8354 Год назад

Great video

@jacoblake2929 4 года назад

Great video!!

@AaronHinesAuto 4 года назад

Thank you!

@michaelhance1839 Год назад

Great Job!

@jamesklein3024 3 года назад

Don't need to unplug the battery unless people randomly jump in your truck and turn it on with you in or under it. Lol. Also that tool is not needed, just use another zip tie on the vacuum pump belt, worked easily! Great video though!

@SubToTripleThreatRC 3 года назад

Thanks for sharing this, much appreciated! Thumbs up!

@AaronHinesAuto 3 года назад

Thank you!

@SubToTripleThreatRC 3 года назад

@@AaronHinesAuto When I'm outside my 4x4 Yukon Denali, I'm smelling burnt rubber from what seems like the front area. I can't figure it out. Would you think that a belt(s) is a likely suspect? They all seem fine but I'm not sure if there is a way to tell if one is slipping.

@brandanmichael6982 4 года назад

Thanks Aaron.

@AaronHinesAuto 4 года назад

You bet bud

@the70oojudge 5 месяцев назад

Informative Thanks!!

@stevenstair1068 2 года назад

I went ahead and got a belt tensioner to replace too along with the belts...

@themadmattb Год назад

Love you man

@alangray5521 5 лет назад

Thank you for this video! GM dealerships charge $300 to replace the two stretch belts!

@AaronHinesAuto 5 лет назад

yikes! thats alot. im glad this video helped you out!

@johnbrownlee7623 4 года назад

Damn Son thats some shit...Thank you....Doing a compressor, and dident see the belt tensioner....,,Thank for the help, very helpful.........JB...........

@greggsanchez7703 4 года назад

Man thanks a lot for this video I was getting ready to all the things you said not to do lol

@caryasmith 3 года назад

Thank you

@Lowdowndirtybassin1978 3 года назад

After the cold start and warm up does your oil pressure go down and back up when you gas it

@Rogun987 3 месяца назад

AND you gave part links? Saint.

@sergioaleman8911 4 года назад

Im trying to replace my alternator on a 19 silverado and i cant seem to loosen the tensioner. Its different from this motor. Any clue how?

@Rayy520 4 года назад

When putting the belt on the vacuum pump does it matter which way you turn the crankshaft

@anthonymacneil2279 3 года назад

What causes a chirp on start up only lasts a second? 2017 Silverado 6.2L. Only has 41,000kms. Should I need a serpentine belt? The tensioner seems to be fine.

@eddieg6214 3 года назад

My 2016 sierra would make a quick squeak noise on morning cold start but its been 2 days with no noise. Nd if the truck was already hot it would make noise when starting. Could it be the belts??

@fishyhobby3697 4 года назад

Very nice video, thank you! However disappointing it may be that there are multiple belts, and a special tool required, I should throw less wrenches and my neighbors won't hear me screaming as much from my garage.. cheers!

@dustinredman3470 2 года назад

Were you working from on top of the truck or under the truck. I couldn't get the belt to jump on the pulley using the zip-tie going to the left. I appreciate your time. Nice video!!

@jeremyredden3433 2 года назад

What size socket for block pully?

@patwma709 Год назад

Great video! I liked and subscribed. One issue. Your link to Oreilly and Amazon both say that the stretch belt tool you link to (which is different than the model # in your video) is the wrong tool for my 6.2L in a 2017 GMC Sierra Denali 4WD. Any ideas? And thank you for the excellent work here!

@jessegarcia704 3 года назад

With your truck having that many miles did it have a rough idle? I know those years of trucks had them

@icoston15 Год назад

Where did you get you at compressor belt from?

@fatsanch8817 3 года назад

Nice video thanks. Also where do you order that specific anti freeze?

@wesleymarshall7400 Год назад

Auto parts stores have them ol reileys and auto zone do at least

@scottmitseff 3 года назад

I didn’t realize that in 2014 GM made a 6.2 L V8 I believe it’s a 6.0 L? I own a Ford 2017 VA with a 6.2 L. Just more of a question/ Comment. Otherwise I appreciate your video it was very well done, thank you for taking the time to provide us with one.

@davidchapman1986 3 года назад

2014 Silverado is part of the K2 platform that uses a 6.2L L86. Some vehicles like Yukon and Tahoe didn't get it until 2015 though.

@carlosjordan2926 2 года назад

My 2019 Texas Edition belts are whistling but I don’t know which one is causing that. Is it recorded to change all three?

@lukea4076 Год назад

What did you find out?

@neilgarcia6370 Год назад

Good video. I'm going to do mine soon. What socket size did you use to turn the crankshaft?

@sashaviroviy5065 9 месяцев назад

He said: 24 mm

@carcanbus 4 года назад

Can I use plastic strap also for vacuum pump belt?

@BIGLENCHO1969 2 года назад

I had same idea. Using zip tie to hold vac belt while turning crank

@og9839 Год назад

Zip tie trick would probably work on both bottom belts

@falsulaimani7 5 лет назад

can i zip tie the vacuum pump same as the A/C?

@AaronHinesAuto 5 лет назад

If I can remember I tried that first and it didn’t work too well. The problem is that it’s hard to keep tension on the belt while turning the crank shaft. I’m sure there could be a way to get it done but having the tool makes it a lot easier. If you’re able to figure It out please share how you did it. Thank you

@stephencannon3140 4 года назад

What about the ZipTie? Did you cut it off when the pulley rotated around?

@AaronHinesAuto 4 года назад

Yes.

@christopherdavisson617 4 года назад

so you used a lift to get to the belts from the bottom?

@AaronHinesAuto 4 года назад

No I used it so I had enough room for the camera and mount

@adamking5472 3 года назад

The Ac Delco vacuum pump is 50$ cheaper than the gates one linked here just an FYI. Part number is 12643517

@darthadan9707 5 лет назад

What size did you use to spin it ?

@1nachitol 4 года назад

You can use a 24 milimeter socket or 15/16

@Thefishingplumber 4 года назад

My ac belt melted off was caught in the bottom tray i found out when my ac wasnt blowing cold anymore what a bummer

@AaronHinesAuto 4 года назад

The ac compressor may have seized up. Very common with these trucks. Try spinning the compressor by hand

@Thefishingplumber 4 года назад

@@AaronHinesAuto it does spin it seams the band wore out, think it could just be the band i wana try before taking it to a mechanic and speding alot

@abejr2513 9 месяцев назад

Don’t forget to remove the zip tie at the end.

@mikecopenhaver4484 2 года назад

Show me the 2019 Silverado with the alternator on TOP!!!

@randysutton8636 9 месяцев назад

2019 at4 6.2 only 2 belts both stretch on and off

@jimmystevens9028 Год назад

Can't you just use a zip tie for the first belt and pulley?

@The_Rut_Funnel 3 года назад

Cut my belts then realized I didn’t have a 24mm socket ........

@juanprenteria5077 5 лет назад

How much its the cost to all the parts ?

@AaronHinesAuto 5 лет назад

hey juan, i have links in the description. but the main drive belt is 27.99, the vaccum belt is 60.00, the a/c belt is 29.00 and the stretch tool is 18.99.

@juanprenteria5077 5 лет назад

Aaron Hines oh ok thank you so much

@birdsgarage3305 5 лет назад

Check out rockauto’s website. I was able to buy all 3 belts and the tool for $28. After shipping the total was around $42. Gates tool, continental belts.

@WilliamMiller-bk2eo 4 года назад

Gates tool is $6.21 at RockAuto...

@blueghost3647 3 года назад

GM we make it harder that is rediculas they cant have a tensioner for the AC and air pump belt

@rogerwilliams1838 3 года назад

Fix the noise issue dirty pulleys loose belt don’t put anything on them I sometimes spray water on a belt to see if squeal is belt or a bearing but any dressing is only coming back to haunt you

@hammer7422 5 лет назад

Same for a 2015 suburban?

@AaronHinesAuto 5 лет назад

Yes!

@hammer7422 5 лет назад

Thank you!!

@PlatinumVenturesLLC 5 лет назад

Does your suburban have a 5.3? Process of elimination says yes!!!!!

@bearsfan2085 2 года назад

Such a fine design by GM. #GMSucks

@rogerwilliams1838 3 года назад

Don’t use any belt dressing I’m a licensed mechanic and I’ve got burned on a job it’ll come back noisier than when you started

@jonwick1396 2 года назад

Excu

@JavierGonzalez-ot3uy 9 месяцев назад

JUST A HEADS UP AND TO SAVE YOU TIME I'VE ALREADY LOOKED AND THIS SPECIFIC STRETCH BELT TOOL DOES NOT WORK FOR A 2019 LTZ 5.3 V8 ENGINE.. and that's based off of O'Reilly Auto parts where the link is too for

@sashaviroviy5065 9 месяцев назад

You skipped on third belt