Single Phasing Fault in 3 - Phase Motor | Motor Single Phasing 

very serious fault well explained

Thanks i learn more about elec.

Jb the great vlogs sending you a full support

Thank u so much sir.

does motor starter turn off if one phase is missing while in operation?

If one of the phase gets loss but the fuse to that phase is still close will backfeeding happen back through that phase. In a 3Ph 4 Wire system

Grateful. How can we avoid single phasing

Experienced this first hand 10 years ago, i was blamed of purchasing an incompitable motor by an AM who was responsible for electrical installations from MCC to motor. I knew very well the motor i chose was compitable to the system as it was a duty standby design and duty one had been working normally without a single fault for 3 months. When the standby pump manual start button was pressed, the motor started to rotate and within a mintue 10K USD was lost. PM asked the AM to check the system comprehensively and the AM replied everything was checked, nothing unusual was found, and it was my mistake leading to the loss. I was then asked to purchase another motor to correct my mistake, and within a mintue after the pump was started another 10K USD was lost. The PM then asked the motor supplier to check what happended and figured out one phase wire was not connected at all. From the very beginning to the end, the PM didn't blame me and I didn't say a single word on this, but the AM never aplogized this.

What do you use in 3phase motor to avoid damaging? thank you

Can you tell me what are the problems of single phasing protection for 3 phase system can you ask for 3 to 5 problems? sir thank you

I had problem..got voltage on all phases but no amp on Red phase..what causes the problem?

One phase high amppere problem solution

how 173 % comes

how to carry test

Jogdish? Is that you?