Ski-Doo Track Rev Gen4 | My Sons First G4 Track Swap! Complete Guide Start to Finish

Подписаться 8 тыс.

Просмотров 3,3 тыс.

50% 1

DIY Snowmobile Maintenance: Track Removal & Replacement Guide for 2017, 2018, 2019, 2020, 2021, 2022 Ski-Doo Rev Gen4 Snowmobiles Renegade, MXZ, 600R, 850etec
🔧 Get ready for a winter adventure with our comprehensive guide to removing and replacing the track on your Ski-Doo Rev Gen4 Snowmobile! In this step-by-step tutorial, I'm coaching my son through the entire process, sharing valuable tips and tricks that I've picked up over the years from trial and error and doing this many times.
🛠️ Whether you're a seasoned enthusiast or a first-time DIYer, this video is designed to empower you with the knowledge and confidence to tackle this essential maintenance task on your own. We'll cover everything from the tools you'll need to the nitty-gritty details of track removal and replacement, ensuring a smooth ride when you hit the snowy trails.
MUDBRATS COMPLETE GUIDE TO TRRACK INSTALLATION:
0:49 How to REMOVE BELT Ski-Doo 850 etec, 600R Snowmobile
1:13 How to remove drop Skid frame
4:49 How to remove Muffler/Can on Ski-Doo 850 etec, 600R Snowmobile
5:24 How to drain Ski-Doo Snowmobile Chain case Oil
5:52 How to remove Skidoo Chaincase Cover
7:02 How to remove Chain and top and bottom Gear and chain tensioner on Ski-Doo Rev Gen4 Snowmobile
8:07 How to Remove Brake Pads and Caliper Ski-Doo G4 Snowmobile
11:18 How to remove Front Cogs Dirve Axle Ski-Doo Rev Gen 4 Snowmobiles
13:03 Removing track from Ski-Doo Snowmobile
13:21 Replace Install new track on Ski-Doo Gen 4 Snowmobile
13:37 Replace Front Cogs Dirve Axle Ski-Doo Rev Gen 4 Snowmobiles
14:16 How to replace Brake Caliper Rev Gen4 Snowmobile
16:10 Replace Brake Pads on Ski-Doo Rev Gen4 Snwomobile 850, 600R
17:09 How to replace Chaincase Bottom Gear, Top Gear, Chain and tensioner
18:05 How to adjust Ski-Doo Chain Tension
18:26 How to replace Chain Case Cover and Torque Pattern Torque Specs
20:03 How to install Skidoo Muffler Can
21:44 How to replace Hyfax/Sliders on Ski-Doo Rev Gen 4 129” 137”
23:21 Install R-Motion Skid Frame
25:16 Adjust Snowmobile Track Tension using ISAT Gauge tool - Snowmobile Track Alignment Gauge
🚀 Arm yourself with the knowledge to keep your snowmobile performing at its best. Don't let track replacement be a daunting task-let us guide you through the process and share the joy of mastering essential snowmobile maintenance.
👍 If you find this video helpful, don't forget to give it a thumbs up, subscribe for more powersports tips, and hit the notification bell to stay updated on our latest content. Happy riding, and may your snow trails be endless!
Enjoy the Ride!
Donate (Buy us a round): bit.ly/2KHTSuZ
• Mudbrats Subscribe: ru-vid.com_...
#skidoo #SmartShox #SnowmobileRepairs #TrailBlizzer #Qualipieces #SnowmobilingTips

Хобби

Опубликовано:

15 янв 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 41

@mudbrats 5 месяцев назад

MUDBRATS COMPLETE GUIDE TO TRRACK INSTALLATION: 0:49 How to REMOVE BELT Ski-Doo 850 etec, 600R Snowmobile 1:13 How to remove drop Skid frame 4:49 How to remove Muffler/Can on Ski-Doo 850 etec, 600R Snowmobile 5:24 How to drain Ski-Doo Snowmobile Chain case Oil 5:52 How to remove Skidoo Chaincase Cover 7:02 How to remove Chain and top and bottom Gear and chain tensioner on Ski-Doo Rev Gen4 Snowmobile 8:07 How to Remove Brake Pads and Caliper Ski-Doo G4 Snowmobile 11:18 How to remove Front Cogs Dirve Axle Ski-Doo Rev Gen 4 Snowmobiles 13:03 Removing track from Ski-Doo Snowmobile 13:21 Replace Install new track on Ski-Doo Gen 4 Snowmobile 13:37 Replace Front Cogs Dirve Axle Ski-Doo Rev Gen 4 Snowmobiles 14:16 How to replace Brake Caliper Rev Gen4 Snowmobile 16:10 Replace Brake Pads on Ski-Doo Rev Gen4 Snwomobile 850, 600R 17:09 How to replace Chaincase Bottom Gear, Top Gear, Chain and tensioner 18:05 How to adjust Ski-Doo Chain Tension 18:26 How to replace Chain Case Cover and Torque Pattern Torque Specs 20:03 How to install Skidoo Muffler Can 21:44 How to replace Hyfax/Sliders on Ski-Doo Rev Gen 4 129” 137” 23:21 Install R-Motion Skid Frame 25:16 Adjust Snowmobile Track Tension using iSat Track Tool

@BobbyO1967GT 5 месяцев назад

So cool what some people invent, great little tool for tightening & aligning the track! Best words spoken after a job... "We have no pieces left." LOL. Great job Gary & Drew!!! Go grab a cold Molson. Cannot wait for the next Monday Night Session! Cheers boys.

@mudbrats 5 месяцев назад

We agree 🤘

@edwardcrampton9542 5 месяцев назад

The only problem I had with this video is that all though you didn’t mess with the secondary or primary you didn’t check for the proper belt deflection and how high it sits in the secondary. And I’m sure I’m not the only person that will say this but never leave your “tool” sit in the clutch cover it’s a disaster waiting to happen. Leave it in your glove compartment. Much safer and way less chances of destroying a primary or secondary clutch! Other than that it was a great video! I watch generally all of them!

@mudbrats 5 месяцев назад

the belt was changed and deflection was set during my pre season checkup and maintenance and u can see its perfect when we take the belt off. But, you make a good point, i could have shown to check that after. And the clutch tool is a good tip. Although i haven’t have any problems ever, i have seen posts where the tool fell out and made a mess. I often wonder if it wasn’t put back the right way to fall out. No one in my pack has run into issues but it is a good tip. Thanks for watching

@davidbrennan5 5 месяцев назад

We have to teach the next generation.... Good job.

@mudbrats 5 месяцев назад

Thanks David!

@roboverholt2035 5 месяцев назад

Hey Gary you should have popped the seal out of the bearing and cleaned it and put some new grease in it .

@mudbrats 5 месяцев назад

@@roboverholt2035 Now you tell me haha - great tip! next time 🤘

@roboverholt2035 5 месяцев назад

Sorry bud didn't know you were doing it lol . Helps prolong tha bearing some more

@davidbrennan5 5 месяцев назад

Drive axle bearings usually last to around 8k miles, should be good for a while. The bearing behind the secondary usually goes first. That type of track tension tool is the best from my experience. The track will align perfectly. @@mudbrats

@Trikekid84 5 месяцев назад

Nice job! Looks like Ski doo did a lot of r&d on how that Axle, brake rotor and chain case go together. So much different than my old rev. It's basically the same as the Elan. 😂 That track tool is slick!

@mudbrats 5 месяцев назад

The gen5 is better design as you don’t need to take the chaincase apart....

@Trikekid84 5 месяцев назад

@@mudbrats wow that's crazy!

@justflylow 5 месяцев назад

Sidenote, on that track adjustment tool. If you want to know how far to set the adjustment from the line, push it on a scale, and find out where your proper tension needs to be and adjust accordingly. Happy riding!

@mudbrats 5 месяцев назад

you dont need to, theres a formula in the instructions.

@justflylow 5 месяцев назад

@@mudbrats maybe they added the formula since I bought mine. I know there was a difference on which way you put the aluminum block on it and it describes that. Well I am sure you did it right.

@justflylow 5 месяцев назад

Nice job on the track replacement! I have one of those track adjustment tools. I believe you said they are called ISAT. Check your owners manual on the setting for the tension. Mine said it needs to 1 1/4 inch at 13 to 19 pounds. So I ran it right up to the line and not any further. I also use a tape measure to find the mark on the tool for setting the depth. Just remember to allow for the change in the spring tension on the mark. Or rather where it will end up when it’s at the right tension. Nice video guys.

@mudbrats 5 месяцев назад

yes, i did say its called iSat in the video. Judging by the comments its sounds like he’s updated the one i have. He has washers on the shaft - thin ones for 1/8” and thicker ones for 1/2” or 1” distance so you dont need a measuring tape. Track tension on a ski-doo is 1 1/2”-2” at 16lbs. Using the formula in his instructions, that makes it 1 3/4” to 1 7/8” which is what we set. To double check it, we used the 2024 137” and out the tool in the same place on the track and it was perfect.

@justflylow 5 месяцев назад

@@mudbrats yes every snowmobile might be a little different. I was highlighting that people should check their operators manual. On page 233 in mine and it’s clearly states that the deflection is 1.26 inches with a tension of 13 to 19 pounds. It gives a little bit of leeway in the tension. Excellent tool though and I highly recommend it. It will get the tension perfect and it will track absolutely true. Everyone I have set has been spot on. I wish I could use it on my motorcycle.

@justflylow 5 месяцев назад

⁠@@mudbrats i did figure out why the numbers you used seemed off. There is a formula to calculate how much space you need for your track that calculates the proper tension needed for your track using the 20 lb spring. This all makes sense now. I must have missed your explanation about this in the video. I do think this is the best and easiest way to get the proper tension and alignment. I recommend this tool to anyone who rides snowmobiles.

@mikeguliz 5 месяцев назад

Man, all these years I thought track day meant something else😂😂😂😂

@mudbrats 5 месяцев назад

Heck ya brother!

@edmoore8171 5 месяцев назад

Nice that thing is cool

@mudbrats 5 месяцев назад

Thanks!

@roboverholt2035 5 месяцев назад

Great video for someone doing it themselves keep up the great content 👍 👏 👌

@mudbrats 5 месяцев назад

Thankyou 🤘

@jimfleury6349 5 месяцев назад

You need some heat in that garage fellas.

@mudbrats 5 месяцев назад

Oh mannnnn, you know it. I had a propane tube heater going to the point the headache was coming on. Needs insulation and a wood stove. Thank you for caring about us haha

@Georgebd2 5 месяцев назад

May have already been commented on but wouldn't it be good measure just to change bearings and anything else while you're there so you don't have to get into it again

@mudbrats 5 месяцев назад

Bearings will get done in a couple of years. It’s a pretty easy job so no probs to do it again

@Georgebd2 5 месяцев назад

I have a 2018 Renegade XRS 850 E-Tec and the gas gauge stopped working on the dash period is there effects can't find anything anywhere everyone just says measure your mileage that this is common in Ski-Doo

@mudbrats 5 месяцев назад

you would have to take it to a mechanic or dealer - its likely the sensor or something like that. Sorry i have no clue.

@Trikekid84 5 месяцев назад

What's the part number for the hockey sticks?

@mudbrats 5 месяцев назад

😂best comment!

@matthew5542 5 месяцев назад

Hey, any night rides on the way? Love those vids

@mudbrats 5 месяцев назад

Thankyou! We have had a late start to the season and a few mechanical problems that ended our rides before the sun set 😫 We did ride home In the dark on Tuesday, but it was also freezing rain so the night footage is limited. Keep doing your snow dance and we will get some night footage out soon!