Sletten Engineering/ EMPI Class 11 VW Off-road Race Prep- Front End 

You can just use a hand held ball joint press. But never forget to cut off the front lip of the old ball joint otherwise is wont get out. Its a easy job to install 4 new ball joints with a 80-' tool.

@@daalhoffarm can you send me a link so I can see this tool or give me the name so I can google it. I have another job to do. Thx

@@TheEZGZ hi gregg, just google ball joint press kit". Its a c clamp but it can produce lots of Force. How to: best to remove the vw arm you want to change the ball joint on. Place in a good vice. Cut off the treat part of the old ball joint. Cut of the Secure lip of the old ball joint so you are 100%sure it can move out. ( Just with a grinder going around to cut the little lip) soak in some wd40 or something else, than use the press tool the old ball joint should come out very easy. Clean the boren en chamfer the edges, some grease in, position new balljoint and use the right size push flance or socket and hammer the new ball joint in with a good big hammer. It won't be easy but I've done more than 5 sets like this. Also for bay window bus those are even bigger, and for Typ 1.

Not everyone is as good as you Dave.

Legend!