No video :(

Smart Gloves for Deaf & Dumb

Подписаться 11 тыс.

Просмотров 42 тыс.

50% 1

This is a video on SMART Gloves for Deaf & Dumb People.
We would love your feedback. Post a review to our profile.
g.page/emtron/...
Hey, check out the products I am selling on Amazon
www.amazon.in/...
Hardware
ATmega32A Microcontroller
ATTiny2313
5 Flex sensors
16*2 LCD
APR33A3 Voice Recorder & Playback
HT12E
HT12D
434MHz RF Transmitter & Receiver
MOC3021
BT136
3.7V LiPo Battery
DC-DC Converter
Software
Programming IDE : Atmel Studio7
Programming Language : Embedded C
Compiler : AVR GCC
Programmer : ATMEL AVR ISP MKII
Download the project Details from GitHub
github.com/BSP...
Thanks for watching. Please like, share & subscribe.
www..com/c/bspembed?sub_confirmation=1

Опубликовано:

23 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 365

@orr4945 Год назад

Nice project!, can you please provide us with a link for buying the glove?

@Emtron_Technologies Год назад

its a custom made glove. Use any glove and attach a flex sensor to it.

@_MukteshwariMirge 5 месяцев назад

I want to build this project without the home automation part. Which parts of the code should i change?

@devshreemehta1270 7 лет назад

Thnkuu so much for replying to my every doubt .... n sry to disturb u ... thnkuuu

@kolhatkarchinmay 7 лет назад

awesome...but how you are programming Apr33a3 externally?? it needs to be loaded with voice using microphone.

@Emtron_Technologies 7 лет назад

Yes, You have to program it through switches(externally). It can hold upto 8 channels. Can you elaborate on your doubt ?

@kolhatkarchinmay 7 лет назад

BSP Embed actually I got confused becoz you have return the sentences in the program..now I realize those are to be displayed on the lcd. thanks for clearing my doubt..keep up the good work..

@MohitTomar_ 6 лет назад

Sir your video is very useful and u have demonstrated it in good manner ..But sir i have a doubt that how you are changing the mode from vioce recognition to device control ...Please explian it

@Emtron_Technologies 6 лет назад

Thanks for watching. By using ZERO gesture symbol. It mentioned in the video. I think you missed it.

@bandiyamuna958 5 лет назад

Sir would you please explain how exactly smart gloves work. Whether they work based on bending angle or based on number of fingers bending

@Emtron_Technologies 5 лет назад

It's combination of both.

@vjraja100 5 лет назад

You have given the Value of R21 in the RF receiver as “R”? What should I use here?

@Emtron_Technologies 5 лет назад

10K

@mrigankamouliacharya8672 5 лет назад

What will happen if I didn't write the fuse bit as mention by you (i.e.D8FF)? Because once I write this fusebit microcontroller stop responding to my usbasp programmer.There is another problem I have faced that after burn your HEX file into microcontroller.Display just showing only block nothing else.I have checked all the connection tried with different developement boards.

@Emtron_Technologies 5 лет назад

0xD8FF, Fuse bytes will not stop you from programming usbasp. It will sets external crystal oscillator & other settings. Their usb be problem with your hardware.

@devshreemehta1270 7 лет назад

I have one more doubt sir why we have chosen a atmega microcontroller and not pic microcontroller or arm ...

@Emtron_Technologies 7 лет назад

Compiler for AVR Atmega32a is Free (Open source), Easily available, Low cost and rich in features.

@castorkajois1705 6 лет назад

sir thanx alot for good demostration

@Emtron_Technologies 6 лет назад

Thanks for watching. Please keep in touch with us.

@yashsharma116 5 лет назад

Hi. I have replicated the entire transmitter circuit but on power on my lcd gets stuck with all black boxes in its top row. I have burned the same hex file provided by you. Please help me fix this issue. It's urgent. Thanks

@Emtron_Technologies 5 лет назад

Check the LCD connections to the controller. System produces a beep sound during power up (If the controller is programmed correct & properly configured).

@vandanmshah 5 лет назад

Can i directly burn your hex file in the mcu? Will it work?

@Emtron_Technologies 5 лет назад

Yes, You can. It will work.

@vandanmshah 5 лет назад

I have been trying to burn it using AvrDude but doesn't work. Can u please help

@Emtron_Technologies 5 лет назад

Check the hardware connection.

@KrishanKumar-qk9sh 5 лет назад

sir can you explain the function of CALIB SWITCH in detal

@Emtron_Technologies 5 лет назад

It's for calibrating the sign languages. To enter into the calibration mode. Press & Hold the switch during power up.

@mrigankamouliacharya8672 5 лет назад

If I wish to change the display port as follows PB0=RS ; PB2= EN ; and Data Pin= PB4-PB7. what changes should I do and which section of the program,please guide.

@Emtron_Technologies 5 лет назад

You have to make change in APP.h header file.

@omkarchavan8991 5 лет назад

Such a nice project 👌👌

@Emtron_Technologies 5 лет назад

Thanks for the feedback.

@suryaaitha2074 5 лет назад

instead of atmega microcontroller we can use wemos d1 esp8266 microcontroller... if we use wemos what are the changes to made in program...is it ok for all interfacing... and y it is only restricted to 8 values in calibration...what is the device it is restrictibg for

@Emtron_Technologies 5 лет назад

You required 5 channel ADC to interface Gloves. Wemos d1 , ESP don't have enough ADC channels.

@madhugoswami5141 4 года назад

hi sir i want this coding asap and im unable to understand the coding u have provided

@Emtron_Technologies 4 года назад

You can download from GitHub.

@vjraja100 5 лет назад

In the 434Hz RF Rx module, terminal 3 (Linear Out) is connected to VCC and not terminal 4 right?

@Emtron_Technologies 5 лет назад

Vcc to 5V, Gnd to Gnd, Dout (linear out) to Din of Decoder.

@AbhaySingh-qs8fk 11 месяцев назад

Can anyone help me to program my atmega32a. I did not get what file is to be selected.

@biginepallivandana9988 6 лет назад

How much does the project cost if we order you and how many days it will take

@Emtron_Technologies 6 лет назад

Sorry. I'm busy with other projects. Don't have enough time to make it.

@arulthomas2621 5 лет назад

great bro...... even an person is dumb he can make an public speeking

@Emtron_Technologies 5 лет назад

Thanks for the feedback. Thanks. Keep in-touch with us.

@_MukteshwariMirge 5 месяцев назад

How do we burn hex file on microcontroller?

@bhargavchauhan6722 5 лет назад

sir just got stuck on one problem, the project is not going into device mode can u give the possible reasons? also can u say the resistance values displayed on screen when we go to device mode?

@Emtron_Technologies 5 лет назад

You can calibrate the gesture for device mode during Initialisation.

@Upendrakumar-ux5dr 5 лет назад

Sir how total project will cost? I want to make it for my major project please reply?

@Emtron_Technologies 5 лет назад

We don't sell the projects.

@lohith2419 Год назад

Sir hello calibration means like we can assign anything different statement also like hello,how r u ?.What is u r age ?.

@Emtron_Technologies Год назад

Yes, You can assign different values, according your project requirements.

@MdHasan-uz2mn 4 года назад

How much this project costs to complete? In rupees or dollar, please

@Emtron_Technologies 4 года назад

Development cost will be 15000.

@maynardsoriano4209 5 лет назад

Can i ask about all the cost of this project sir? ist high? cause we will make a proposal like this in our school

@Emtron_Technologies 5 лет назад

Sorry, Currently we are not in the position to sell these projects.

@devshreemehta1270 7 лет назад

sir why we have used that attiny 2313 and which compiler we have used for it and why didn't v use atmega32 der instead of that attiny

@Emtron_Technologies 7 лет назад

ATTiny2313 is a 20Pin IC, which is sufficient for this application. I used Atmel Studio (AVR Gcc) compiler for both microcontrollers.

@aryanmodi4608 6 лет назад

i am not getting the connections of flex sensor. Do we have to give 5 volt to one pin and take the output though the other pin while connecting it to ground?

@Emtron_Technologies 6 лет назад

Flex sensor is connected to uC ADC through potential divider network. One end of Flex sensor is connected to 5V & other end to 33K. The other end of resistor is connected to Ground. The junction point Flex sensor & resistor is connected to ADC.

@aryanbarnawal3061 6 лет назад

after making all the connections our LCD is turned on but it is not intializing. It is just showing a line of blocks. What could possibly be the reason?

@Emtron_Technologies 6 лет назад

Check LCD pins connections WRT the PORT defined in the program. And check weather the microcontroller is running ?

@mrigankamouliacharya8672 5 лет назад

Hi Aryan, Are you able to solve this problem? I am facing the same problem. Can you please share your experience.

@bhargavchauhan6722 5 лет назад

Sir if i calibrate the glove and after that if i restart the device again would it retain previous calibration or it would restore the default one in code?

@Emtron_Technologies 5 лет назад

It will retain in Memory.

@vjraja100 5 лет назад

In the APR33A3 module, in the circuit diagram are the connections from 3-10 to M8 to M1 respectively?

@Emtron_Technologies 5 лет назад

Yes.

@bhargavchauhan6722 5 лет назад

Bro from where did u get apr33a3 module??

@vjraja100 5 лет назад

Bhargav Chauhan Amazon. Here’s the link: Robocraze 8 Channel Voice Recorder and Playback APR33A3 RC-A-325 www.amazon.in/dp/B0784LD33N/ref=cm_sw_r_cp_api_i_yyzyCb224D5JV

@rishabhrai6264 2 месяца назад

your provide hex file are not working

@satyaprasanthni8982 6 лет назад

if i want to use 3 flex sensors. should i have to make any changes in the programe or can i dump same program. to get 8 voice out put

@Emtron_Technologies 6 лет назад

You have to make changes in the program. 8 different gestures for 8 voice O/P

@devshreemehta1270 7 лет назад

sir the circuit diagram is implemented as it is on the hardware means m just learning this things sry for this silly doubt plz rply if u can....

@Emtron_Technologies 7 лет назад

Yes, you are right. Thanks for watching. Please learning.

@suryaaitha2074 5 лет назад

hlo.. here u have stored up to only 8 symbols in calibration...why we cant store more than 8 symbols... actually why we are storing 8 symbols.in calibration mode....

@Emtron_Technologies 5 лет назад

You can store more gesture symbols.

@riyanshuanand7160 6 лет назад

woh awesome

@Emtron_Technologies 6 лет назад

Thanks for watching. Please keep in touch with us.

@vjraja100 5 лет назад

Unable to get a hold of the BS250 transistor. Can you suggest any replacement?

@Emtron_Technologies 5 лет назад

You can use BC547.

@nightstone1 2 года назад

sir, can you tell how to connect the flex sensor with cable?, are they soldering?

@Emtron_Technologies 2 года назад

Check the circuit diagram.

@nightstone1 2 года назад

i mean in minute 0:23 the pin flex sensor connect to cable on covering black , how u coonect them

@Emtron_Technologies 2 года назад

@@nightstone1 Flex sensor has two wires. one pin connected to 5v and other pin is connected to 10K resistor. It's like potential divider network.

@GoodLuck-yu5fi 5 лет назад

can we use avr isp programmer instead of atmega mkii?... Also can we use progisp instead of avrdudes?

@Emtron_Technologies 5 лет назад

AVR ISP can used instead instead MKII & AVR Dude.

@ahmadyogaswara7921 6 лет назад

Excuse me, I want to ask. what is the benefit of making this tool?

@Emtron_Technologies 6 лет назад

Its useful for the deaf & dumb people. BTW, Thanks for watching.

@satyaprasanthni8982 6 лет назад

tell me about calib switch. i want to know the switch position whether the position is always on or off.

@Emtron_Technologies 6 лет назад

It's a tactile switch. it will always be in Logic 1, When you press, It will asserted to LOW 0.

@tamirattesfaye3068 Год назад

please show how to code the project in the description many code are there but difficult to understand also your email address

@nareshrao7491 Год назад

sir , Instead of microcontroller can i use raspberry pi, if yes, how it

@Emtron_Technologies Год назад

Yes you can use it.

@iankehnsanchez2582 5 лет назад

sir, I can also put the APR33A3 Voice Recorder & Playback into the ATTiny2313 right?

@Emtron_Technologies 5 лет назад

Yes, You can.

@iankehnsanchez2582 5 лет назад

Sir, can I ask where can I buy the APR33A3?

@lohith2419 Год назад

Sir how can I contact u iam thinking to make my mini project on this can u tell me how much cost did the components took

@Emtron_Technologies Год назад

Approximately 5000.

@sridevipoluparthi9466 6 лет назад

Is it possible to increase the signs with this same project? Or do we need any further modifications?

@Emtron_Technologies 6 лет назад

You can easily increase signs with NO modification in hardware.

@sridevipoluparthi9466 6 лет назад

Thank you for reply. Can we use AP8942A instead of APR33A3?

@aryanmodi4608 6 лет назад

Can You (BSP Embed) please explain how we increase the no of signs storage from 8 to let say 20?

@Emtron_Technologies 6 лет назад

If you can program(or Embed) voice into AP8942A, Then you can. And the voice length is 42 seconds.

@Emtron_Technologies 6 лет назад

Use different gesture & ADD the ADC values for the gesture into the lookup table.

@sanjaydheeran3740 6 лет назад

I would like to know value of the resistors used in whole circuits........and I have doubt in building a circuits.....

@Emtron_Technologies 6 лет назад

Please check the circuit diagram.

@sabarikannan2431 6 лет назад

We checked that we want your contact Bro....

@abubakrbhatti1288 4 года назад

sir i want github link for this project i cant find one in the description kindly help me

@Emtron_Technologies 4 года назад

Sorry for the inconvenience to you. We have removed the code from the GitHub due to some technical issues.

@ravalitalluri6572 6 лет назад

sir, can u plz explain me how to use bluetooth in this poject, and how much cost for doing this project....

@Emtron_Technologies 6 лет назад

Instead of RF Module use HC05/HC06 bluetooth module And make it battery operated. Currently i'm busy with other projects, so couldn't do it.

@bhargavchauhan6722 5 лет назад

@BSP Embed sir i am not getting apr33a3 module in my locality and also i thought of making one but the apr33a3 ic is bit costly so is there any replacement for it?? Or i havr to use that only Does the code changes if i use any another audio recorder playback ic??

@Emtron_Technologies 5 лет назад

It depends on the module. APR is very easy to use.

@bhargavchauhan6722 5 лет назад

@@Emtron_Technologies ok thanks sir

@swapnilkatke1152 6 лет назад

I want to make the same device can you help and what's the total cost of the device?

@Emtron_Technologies 6 лет назад

Thanks for watching. Please send me a mail to bsp.embed@gmail.com

@rasaqsodiq7897 4 года назад

Can I build something Like this using labview

@Emtron_Technologies 4 года назад

Sorry, I have no idea.

@devshreemehta1270 7 лет назад

sir which software did you use for simulation of the project can I use any software like Proteus or multisim or I have to use some specific software...

@Emtron_Technologies 7 лет назад

I have not used any simulation software. You can use Proteus.

@devshreemehta1270 7 лет назад

BSP Embed ... K thnkuu sir

@vijaykapoor6804 6 лет назад

sir code downloaded from your below given link has lot of error sir can u send me exact prg since im not familiar with prg language

@prasannapatil4196 7 лет назад

superb

@rajeeshramankutty7614 5 лет назад

sir, how i program atmega 32 and atttiny without any constraints of bend angle ? pls mail me the complete project details . because i am very impressed with this project and i brought all the components but i am confused in the coding part. pls attach the complete project to my mail.

@Emtron_Technologies 5 лет назад

You have to use AVR ISP Programmer to program ATMega32 & ATTiny. You can download all the details from GitHub.

@abdullahmamun2396 6 лет назад

sir i have a doubt ,, is all codes are being uploaded into microcontroller ????

@Emtron_Technologies 6 лет назад

You have to compile all the code to generate one Hex file. For compiling you need to use ATMEL Studio 7

@aarthigopal9007 5 лет назад

Sir, would I be able to purchase this product?

@Emtron_Technologies 5 лет назад

Sorry, currently we don't have an facility to sell these projects.

@dczeditography 4 года назад

Which IC kit is using for programming ATmega 32

@Emtron_Technologies 4 года назад

AVR ISP Programmer..

@eliyaskhan6970 5 лет назад

How to buy this project I want to buy what is the cost of it please

@Emtron_Technologies 5 лет назад

Sorry, we don't sell these projects.

@aryanmodi4608 6 лет назад

sir, where did you connect the output of dc dc converter. Is it in the lcd.If yes where exactly?

@aryanmodi4608 6 лет назад

It is not clear in the circuit diagram provided in the link.

@Emtron_Technologies 6 лет назад

Converter provides 5V from LiPo battery, which is the power supply for the entire circuit. It is connected to all modules(LCD, uC, RF Tx, Voice board).

@Nomankhan-jv1nk 6 лет назад

sir i am doing this project as my final year project. but sir i want to print all english alphabets(26). so i cant use APR33A3 because it has only 8 channel. so what should i do?? any suggestion??

@Emtron_Technologies 6 лет назад

You have to use I2C base MP3 player Module with SD card interface.

@Nomankhan-jv1nk 6 лет назад

mayank mehndiratta still working brother it will take some time

@dczeditography 4 года назад

How do we program the Atmega32 and ATtiny2313 ?

@Emtron_Technologies 4 года назад

using AVR ISP Programmer.

@aryanmodi4608 6 лет назад

Bs250 is not available and we need it urgently. Is there any other alternative of Bs250?

@aryanmodi4608 6 лет назад

Can we use CL100S npn medium power transistor or BC107B npn transistor or bc337 NPN general purpose transistor? Suggest

@Emtron_Technologies 6 лет назад

You can use BC337

@biginepallivandana9988 6 лет назад

Where did you connect the adc from flex sensors?

@Emtron_Technologies 4 года назад

Flex sensor is connected to an ADC through potential divider network.

@achuthm8263 3 года назад

Flex sensors used are of 2.2" or 4.5"??

@Emtron_Technologies 3 года назад

4.5 inch

@balureddy4977 5 лет назад

What is the total cost of that project sir?

@Emtron_Technologies 5 лет назад

Currently we don't have facility to sell these projects.

@sridevipoluparthi9466 6 лет назад

We are doing project on this...could you please send me the .hex file for this project.we tried the program bt it's throwing an error at app.h files.please help me with this

@nithinreddygovindugari4261 6 лет назад

Sridevi Poluparthi can you please tell me where you bought the tools required . I am doing the same project

@Emtron_Technologies 6 лет назад

Will send you the Hex file ASAP.

@sridevipoluparthi9466 6 лет назад

Please send me the hex file as early as possible.. Please

@sohebshaikh6526 4 года назад

Sir show us the connection being made !!plz

@Emtron_Technologies 4 года назад

Please check the circuit diagram.

@sanjaydheeran3740 6 лет назад

I need a complete circuit diagram...

@Emtron_Technologies 6 лет назад

Circuit diagram is available in the GitHub. Link is given in the video description.

@i_abhayjha 6 лет назад

Can you help me with program files of this project.

@Emtron_Technologies 6 лет назад

All the files(.c, .h and even the Hex file) are available in the GitHub. Link is given in the description.

@SkylasH7 5 лет назад

Sir i am unable to open the github file can u please help me with that.

@Emtron_Technologies 5 лет назад

Download as ZIP file from GitHub and extract.

@vandanmshah 5 лет назад

What to set the fuse bit values for atmega32A

@Emtron_Technologies 5 лет назад

0xD8FF

@terrymorrow1870 4 года назад

Hey I want you to tell me the meant for both word DEAF and DUMB?

@Emtron_Technologies 4 года назад

This kit is for people who can't speak.

@Emtron_Technologies 4 года назад

Sorry, I not getting you.

@MohitKumar-ct6te 6 лет назад

i wanna do ths as my final yr project..cn u plz help me ..i need to buy ths project..whats the cost

@Emtron_Technologies 6 лет назад

Currently i'm busy with our projects. You can built yourself, as all the details are available in the video description.

@VijayYadav-em8mu 6 лет назад

hii mohit kumar apne ye project bnya tha kya agr bnya tha plz help me agr apke pas h project h ya kuch bi related info shrare plz its request mail id:raovijaydelhi@gmail.com

@biginepallivandana9988 7 лет назад

how can i understand and dump the code into the circuit

@Emtron_Technologies 7 лет назад

If you know c programming, You can easily understand the code. You can dump using AVR ISP Programmer.

@biginepallivandana9988 7 лет назад

BSP Embed thank u

@alaahamid1048 Год назад

May I know how much code was written?

@Emtron_Technologies Год назад

Please check the video description.

@tarabnaveed6952 5 лет назад

Do we apply 5V to each flex sensor?

@Emtron_Technologies 5 лет назад

Check the circuit diagram.

@nehabramhe8622 4 месяца назад

how to upload a which code i am confused so please help please

@Emtron_Technologies 4 месяца назад

You have to compile all the c code to generate Hex file, Then upload that hex file.

@nehabramhe8622 4 месяца назад

@@Emtron_Technologies dont know which upload a code becasue i use a first time microchip studio

@praveenboddu3629 5 лет назад

How much is estimated cost of this project?

@Emtron_Technologies 5 лет назад

Around 8000/-

@rakshitmittal4098 6 лет назад

i want to make the same project with raspberry pi

@Emtron_Technologies 6 лет назад

RPi is an high-end system. It's an overkill for this system.

@saiakunuru92 Год назад

Sir I want to buy this product

@Emtron_Technologies Год назад

Please send a mail to bsp.embed@gmail.com

@sridevipoluparthi9466 6 лет назад

Instead of ATTiny2313 microcontroller is there any alternative to use? Please tell me the component specification if it possible.

@Emtron_Technologies 6 лет назад

You can use any controller. Please check the circuit diagram. Link is given in the description.

@rambillichandrakala4848 6 лет назад

Can we implement it by using ATmega16 microcontroller?

@Emtron_Technologies 6 лет назад

Yes You can.

@rambillichandrakala4848 6 лет назад

Thank you for reply sir.we are doing project on in it.could you send the datasheet of this project.plz help me with this sir

@Emtron_Technologies 6 лет назад

All the details are available in the video description. You can download from GitHub.

@ahmadyogaswara7921 6 лет назад

if i want to use that glove to motor driver how to do it?

@Emtron_Technologies 6 лет назад

Use the motor driver circuit in the receiver.

@jaswanthvishalp6896 6 лет назад

Wat if I need to load more sign language values sir

@Emtron_Technologies 6 лет назад

You have add digital values of the pattern in an array.

@ramandeepsrivastav9991 5 лет назад

im also working on same project with the help of arduino.Can u help me to understand talkie library.

@Emtron_Technologies 5 лет назад

Sorry, I haven't used that library.

@ramandeepsrivastav9991 5 лет назад

@@Emtron_Technologies okk , but plz try it once . it will be vry kind of you if you help me to understand it. thnx

@amirthav2674 4 года назад

Hii can u plzz help me to build this what

@vjraja100 5 лет назад

Specifications for the SMPS please?

@Emtron_Technologies 5 лет назад

12V, 500mA.

@vjraja100 5 лет назад

@@Emtron_Technologies Can I use 12V, 1A?

@vrushabhmoon6375 4 года назад

how to dump code in atmega32A using atmel studio and which program file we have to use???

@Emtron_Technologies 4 года назад

In the Atmel studio. create a new project, select a target controller. (In this case its ATMEGA32A). Include the .c and provide the path for .h files. and in the build tab. Build the solution. Which will create an Hex file. This Hex file will be programmed into the controller.

@vrushabhmoon6375 4 года назад

@@Emtron_Technologies can you make a short video tutorial of it please

@Emtron_Technologies 4 года назад

@@vrushabhmoon6375 Sure, Will try to do it. But don't wait for our video tutorial.

@vrushabhmoon6375 4 года назад

@@Emtron_Technologies then can you plz give me a step by step guide of atmel studio Actually i am new to atmel studio i dont know anything about it

@vrushabhmoon6375 4 года назад

@@Emtron_Technologies or can you give the hex file of both the transmitter and reciever??

@poojashastry717 6 лет назад

sir instead of flex sensor can we use accelerometre sensor

@Emtron_Technologies 6 лет назад

Yes you can use.

@sushmitamanakatti2572 4 года назад

hello maam did u do this project ? i am in need of help would you help me please send me your email. I,m a student

@luminous6703 5 лет назад

I am also working on this same project using arduino mega. I could'nt figure out the code for this. Can anyone please tell the code for it?

@Emtron_Technologies 5 лет назад

Will make the same project with Arduino in our upcoming episodes.

@luminous6703 5 лет назад

@@Emtron_Technologies our final year project work is going on..so can you please tell the code alone for it?. . luminouskokis@gmail.com

@Emtron_Technologies 5 лет назад

Sorry, We have other projects inline.

@liponsarkar2686 5 лет назад

plz show me how to made it

@Emtron_Technologies 5 лет назад

Check the video description.

@praveen0802 6 лет назад

How to store the program in atmega 32...

@Emtron_Technologies 6 лет назад

using AVR ISP Programmer.

@shekinahsardonyx1396 5 лет назад

Can i know the values of resistors used

@Emtron_Technologies 5 лет назад

Check the circuit diagram.

@RahulRaj-gw2bu 5 лет назад

Sir, My final year project is inspired by this project and we love the way you made it. Can i directly upload the hex file to the atmega 32 instead of the Atmel Studio solution?

@Emtron_Technologies 5 лет назад

Yes You can do it

@shaheryar7209 4 года назад

Sir we r also working on it plz help us

@farhanyousaf7704 2 года назад

Hello sir My final year project inspiration is this video Cam I get the source code sir plz

@tamirattesfaye3068 Год назад

@tamirattesfaye3068 1 month ago please show how simulate in proteus please sir our project on based this

@bhargavchauhan6722 6 лет назад

Which file is to be burn on the avr?? The transmitter and receiver hex file?? And can u help me how to program the avr?

@Emtron_Technologies 6 лет назад

There are two units. Transmitter & Receiver. You have to program/burn Transmitter.hex to Tx & same for receiver.

@bhargavchauhan6722 6 лет назад

I dont have an usbasp but i want to use arduino as isp can u guide me?

@Emtron_Technologies 6 лет назад

You will get an tutorial on RU-vid using arduino as programmer.

@bhargavchauhan6722 6 лет назад

@@Emtron_Technologies but can i dump the same hex file using arduino...coz arduino ide only uploads its own c files which u write on the screen

@Emtron_Technologies 6 лет назад

You can check this tutorial. www.instructables.com/id/Programming-AVR-With-Arduino-As-ISP-Without-Bootlo/

@bandiyamuna958 6 лет назад

may I know the cost of components for doing this project

@Emtron_Technologies 6 лет назад

Approximately 3000 Rupees.

@bandiyamuna958 6 лет назад

Sir there in the project how u have recorded your voice for 4 gestures. Can we use any no. of gestures?

@Emtron_Technologies 6 лет назад

Recorder manually. It has microphone in the APR board. And you can have any number of gestures.

@nanu1793 5 лет назад

I'm trying to recreate the same idea but with arduino UNO... and I'm struggling *.* Can anyone PLEASE help me with the code??

@allmightqs1679 5 лет назад

What help do you need?

@nanu1793 5 лет назад

@@allmightqs1679 Thank you so much, I figured it out

@mrigankamouliacharya8672 5 лет назад

Hi, I am also interested to make it through Arduino, can you please share your experiences or code

@harisb1676 6 лет назад

can i implement this using arduino? pls help me..!!

@Emtron_Technologies 6 лет назад

Yes, You can. You have to rewrite the code for Arduino.

@turgahmuthu6073 6 лет назад

how about the connection sir

@shreyaspoojary2702 4 года назад

Nice project sir, I want to do this please give me the pcb layout file of project

@Emtron_Technologies 4 года назад

Sorry, We don't supply only PCB. We supply Full project.

@shreyaspoojary2702 4 года назад

@@Emtron_Technologies what is the cost of project sir

@Emtron_Technologies 4 года назад

@@shreyaspoojary2702 Please mail to bsp.embed@gmail.com