sir there is problem in the code which is given where the sensor is working as per the project. The sensor has to toggle but it is not happening sir ,how to change the code for it??
sir , can you say how i can setup that bylnk app , now it is blynk iot app.. please say how to setup that bylnk iot app for that blynk code . please reply whatever it is.
While I was writing code I had attached LCD with I2C converter to the project, but to simplify the project, I had not shown it here. Rest assured the code will work same if you attach LCD or not
While I was writing code I had attached LCD with I2C converter to the project, but to simplify the project, I had not shown it here. Rest assured the code will work same if you attach LCD or not
@@ZARONEPROJECTS THE MOTOR IS NOT GETTING OFF WHWN SENSOR TOUCHES WITH WATER AS WEEL AS IN THE DASHBOARD THE HUMIDITY AND TEMPERATURE READINGS ARE NOT VISIBLE
Try running these code, these are for smart irrigation using blynk, here you have to download blynk legacy and then make v5 for humidity, v6 for temperature and v7 for moisture and a button at D0 to control motor : drive.google.com/drive/folders/1iKjecS7MhnrUTNIDIJm2dgB21H2f1AGM
WARNING: library LiquidCrystal I2C claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp8266 architecture(s). C:\Users\princ\Downloads\smart_irrigation_with_thingspeak\smart_irrigation_with_thingspeak.ino: In function 'void setup()': C:\Users\princ\Downloads\smart_irrigation_with_thingspeak\smart_irrigation_with_thingspeak.ino:55:14: error: no matching function for call to 'LiquidCrystal_I2C::begin()' 55 | lcd.begin(); | ^ In file included from C:\Users\princ\Downloads\smart_irrigation_with_thingspeak\smart_irrigation_with_thingspeak.ino:21: c:\Users\princ\OneDrive\file\Arduino\libraries\LiquidCrystal_I2C/LiquidCrystal_I2C.h:58:8: note: candidate: 'void LiquidCrystal_I2C::begin(uint8_t, uint8_t, uint8_t)' 58 | void begin(uint8_t cols, uint8_t rows, uint8_t charsize = LCD_5x8DOTS ); | ^~~~~ c:\Users\princ\OneDrive\file\Arduino\libraries\LiquidCrystal_I2C/LiquidCrystal_I2C.h:58:8: note: candidate expects 3 arguments, 0 provided exit status 1 Compilation error: no matching function for call to 'LiquidCrystal_I2C::begin()' . this error is come please give solution