smart water level sensor using shelly uni

Подписаться 341

Просмотров 12 тыс.

50% 1

A device for measuring the water level in the tank directly on the mobile phone by Shelly Uni
The best way to measure the water level in the tank is on the phone with the possibility of automating the pump based on this measurement and receiving direct alerts according to the water level on the phone work with home assistant
water level sensor
--------------------------------------------------
Fluid level sensor purchase link
s.click.aliexp...
from amazon USA : amzn.to/3pCg2Tb
For High Temperature Liquid / Diesel / Dirty Water Sewage Level
s.click.aliexp...
---------------------------------------------------
Shelly Uni Or Shelly plus Uni
from shelly web : bit.ly/3XheP5w
from aliexpress : s.click.aliexp...
from Amazon UK : amzn.to/3AlwNYE
from Amazon DE : amzn.to/3AnoVG0
---------------------------------------------------
Link for DC Adapter
from amazon USA : amzn.to/3QMqvHc
from aliexpress : s.click.aliexp...
--------------------------------------------------
Important note: If you purchase a wrong sensor with only two wires, the problem can be solved by purchasing this part
from amazon : amzn.to/3RiXzKi
from aliexpress : s.click.aliexp...
---------------------------------------------------
To support the channel : www.paypal.me/...
The official email for this channel Wesmart4@outlook.com
----------------------------------------------------
As an Amazon Associate I earn from qualifying purchases
#shelly #waterlevelsensor #waterlevelcontroller

Опубликовано:

7 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 30

@wesmart1 11 месяцев назад

Fluid level sensor purchase link s.click.aliexpress.com/e/_DkgA4zv from amazon USA : amzn.to/3pCg2Tb For High Temperature Liquid / Diesel / Dirty Water Sewage Level s.click.aliexpress.com/e/_DDguI4N --------------------------------------------------- shelly uni from shelly web : bit.ly/3C7i1WS from aliexpress : s.click.aliexpress.com/e/_Dn2NelD from Amazon UK : amzn.to/3AlwNYE from Amazon DE : amzn.to/3AnoVG0

@WarlonWinterheart Год назад

Did not like the robot voice, but otherwise a very good and informative video. Thanks!

@wesmart1 Год назад

My main channel WeSmart is in my original language which is Arabic here it is a subchannel the videos are in English Using text to speech

@braddavis6 Месяц назад

great idea. Can you suggest how to connect to a Shelly Plus Add-On? Thank you

@wesmart1 Месяц назад

Thank you, There is no difference Need 12 volts power supply + to level sensor Red wire - to level sensor GND and on Addon GND White wire from level sensor to analog in on shelly Addon But currently I prefer shelly plus uni bit.ly/49fqy85

@directhouses838 Год назад

Hello, thanks for your very relaxed explaination. It's very easy to follow ..... but i have a little problem. I have the exact same combination. But when i connect the green wire to the ground .... nothing will work. When i disconnect it the shelly led goes up again .... Do you have any idea what i am doing wrong? Thank you so much. Kind regards, Frank, France

@wesmart1 Год назад

Hello Do the colors of the wires on the sensor the same colors as the video ??

@akhlaq87 3 месяца назад

Hey, thank you very much vor detail wiring pics and explanation. I've bought the Range 0-2m and Output 0-5V linked from your description and bought Shelly uni plus. Could connect to shelly via the app, but there is no voltage (all the time 0.0v). I've double checked but your wiring with mine but didn't found the difference. So white from sensor to white of shelly (ANALOG IN), red with red (VAC1), and black and green (VAC2/GND) with blue from sensor. Any idea what I'm doing wrong? Is there any wiring difference with shelly uni and shelly uni plus?

@wesmart1 3 месяца назад

You're welcome, my friend. Yes, your wiring is correct. Did you activate the sensor on the Shelly UNI Plus? You need to do that with the Plus model by adding a peripheral.

@aliibrahim1234 Месяц назад

Salam Nael, at 6:30, in Tank full, when relay is On it will notify alexa, can you please advise how it was done for Tank empty?

@wesmart1 26 дней назад

Difficult to explain through comments When switch off notify alexa Or when volt less than notify alexa

@maak6270 Год назад

You rock man, very well explained!

@wesmart1 Год назад

Thank you 👍

@Omobilo 3 месяца назад

Thanks for this. Seems your ali link also shows probe is a 2-wire one and not a 3-wire. Can you please confirm also from your end before I order? The 3rd (that looks like a wire) is not a wire but some hose for air vent if not mistaken? btw: what esp32 board would you buy today for this as an alternative to the shelly uni since i have esp integration setup on Homeassistant?

@wesmart1 3 месяца назад

You're welcome Buy from this link s.click.aliexpress.com/e/_DkgA4zv Choose any size suitable for you and then choose 0-5V Don't worry about the pictures just choose from 0-5, volts there will be three wires for sure Use the new version of Shelly Uni Shelly plus uni s.click.aliexpress.com/e/_oCF3Et4 Fully compatible with Home Assistant and many advantages

@Omobilo 3 месяца назад

@@wesmart1Thanks. Why not the 0-10v for a 2m depth or best 0-5v?

@wesmart1 3 месяца назад

@Omobilo You're welcome! There is no difference in terms of performance, only in the number that will appear during the tank filling stage depending on whether the level sensor output is 0-5 or 0-10.

@wesmart1 3 месяца назад

@Omobilo You're welcome! There is no difference in terms of performance, only in the number that will appear during the tank filling stage depending on whether the level sensor output is 0-5 or 0-10.

@ToTo-od9wz Год назад

Hello, I have same configuration but unfortunately the readings are not stable. I have a range between 0,07V and 0,28V without moving the sensor. It is necessary a stabilized power source? You use one in this example? Thank you.

@wesmart1 Год назад

Welcome These changes are not significant if they are at a level higher than 1 volt And the reasons are mostly the passage of wires with other electrical wires

@pierrejaubert9189 Год назад

Hello, thanks for sharing. I have bought the shelly unit and sensor before watching your video... and my water level sensor has only 2 wires (red and black) instead of the 3 like yours. Any idea about the cabling? Thanks in advance for your support.

@wesmart1 Год назад

Hello You're welcome You need to buy a piece to convert current to voltage Like this s.click.aliexpress.com/e/_DlE2JyD

@kashxpert 4 месяца назад

Thank you, I have the exact same setup nut forgot to ground the sensor green wire but it seems to work fine. Is there an issue with that? Should I fix it? I have value flaunting a bit but not significantly.

@wesmart1 4 месяца назад

You're welcome, Yes, that's right, don't modify anything. This flaunting is considered normal, don't worry

@user-ud4rv5mo8d 11 месяцев назад

Purchased sensor and it says it needs 24v DC power - what will happen if I use 24V AC as I seem to have plenty of spare AC power adaptors ?

@wesmart1 10 месяцев назад

The device will not work correctly with 24VAC You can use 12vdc if 24vdc not available

@daiashthomas Год назад

Would this sensor work in Kerosene or bio-diesel.

@wesmart1 Год назад

There is another type dedicated for diesel You can connect in the same way in the video You should order 0-5 or 0-10 volt output This is a link s.click.aliexpress.com/e/_DnLNVX3