Smartcare Damp proof and Roof tape application 

smartcare Damp Block 2K Waterproofing Asianpaints Application Video Full Details
• smartcare Damp Block 2...
Smartcare damp proof Waterproofing | Roof Cooling system Asianpaints
• Smartcare damp proof W...
Apex Ultima Protek Duralife Base Coat Paint | How To Apply Painting Exterior Walls Lamination Paint
• Apex Ultima Protek Dur...
DAMP SHEATH Water Proofing SmartCare Asianpaints Application | Interior Walls | How to Painting
• DAMP SHEATH Water Proo...
SmartCare DAMP SHEATH Water proofing application | Exterior Walls | Asian paints
• SmartCare DAMP SHEATH ...
SmartCare EPOXY TRI BLOCK (Asian Paints) application
• SmartCare EPOXY TRI BL...
#Asianpaint
#Smartcare
#Dampproof
#Rooftape
#smartcareDampproof
#howmadebuildingleeksflooring
#Newand50yearsoldbuildings
#waterleeksstopping
#workmethods
#permanentandguaranteed
#waterproofingSystemSolutions
DIRECTIONS FOR USE:
1.SURFACE PREPARATION:
Prepare the surface by cleaning and ensure that it is free of dust, oil, grease, grime and loose particles etc.
The substrate must be checked for its Soundness. Small cracks (3mm or less) should be opened, cleaned & filled with SmartCare Crack Seal. Bigger cracks, damaged portions& hollow areas must be repaired with polymer modified screed.
2.APPLICATION METHOD HORIZONTAL SURFACE:
Apply a self-priming coat of Damp Proof Advanced (diluted with water in 3:1 ratio). Apply two perpendicular coats of Damp Proof Advanced without dilution.. Achieve a forced system coverage of 10 sq. ft/tr. Allow it to dry for 4-6 hours between coats. For best performance on terraces, ensure that the product is applied on the entire roof including parapet wall.
VERTICAL SURFACE Fresh Painting:
Apply a self-priming coat of Damp Proof Advanced (diluted with water in 3:1 ratio) Apply a second coat of Damp Proof Advanced without dilution. Achieve a forced system coverage of 25 sq. ft./tr Re-painting: On previously paintad sun feces with high quality exterior emulsions apply single undiluted coat of Damp Proof Advanced with a force coverage of 35-40 s ft/tr.
Top Coat Application: Apply 2 coats of Asian Paints ExteriorEmulsion of the desired shade.
Allow it to dry for 4-6 hours between coats.
3.PRECAUTIONS & RECOMMENDATIONS:
Do not apply during rains or extreme temperatures.
Avoid excessSIve surface abuse which would lead to puncturing of the coating film.
Corners and joints of drain pipes, channels etc to be treated with cement sand mortar prior to coating application.
SmartCare EPDM corners &tapes are recommended to be used at corners, flashing areas, joints & drain for better reinforcement Effective on all exterior surfaces like terraces chaijas, vertical walls atc.