SMITTY SLED BUILD DIY!! - Light and Detachable for a Two Man Ice Fishing Shanty

Подписаться 16 тыс.

Просмотров 26 тыс.

50% 1

From some parts that I had out in the garage (and some purchased nuts and bolts) I was able to construct a Smitty Sled for my 2 man ice fishing shanty (an old Clam Guide) that is integral to the sled but is completely detachable once your destination is reached after what is now hopefully an easy pull across the ice and snow!
Vid of the first time on the ice! • Detachable Smitty Sled...
Other DIY Projects:
Transom Repair: • TRANSOM REPAIR STEP BY...
Boat Deck Extension: • HUGE BOAT DECK UPGRADE...
Lure Storage Solutions: • DIY MUSKY LURE STORAGE...
Help us Grow Angling Anarchy by shopping on Amazon through the link below! Any purchase you make will help us out!
amzn.to/2pfTAmG
Check out the YOLOtek PowerStick, The easiest way to run an action camera!
bit.ly/3nEYouc
The Rods and Lures We Use:
chaostackle.com/
Reels:
Shimano Tranx 400HG amzn.to/2IMPCsN
Shimano Tranx 500HG amzn.to/2oszTbt
Cameras:
Chest Cam: GoPro Hero 4 Silver amzn.to/35wGAJU
Pole Cams: GoPro Hero 3+ Black (x2)
Gunnel Cams: GoPro Hero 7 Black amzn.to/31afa9x
Slow Motion Cam: GoPro Hero 7 Black amzn.to/31afa9x
Main Camera: Canon M50 amzn.to/3eAoOvc
Drone: DJI Phantom 3 Standard amzn.to/35xGVvZ
Camera Accessories:
Chest Mount: Velocity Clip amzn.to/2IKw744
Camera Tripod: 60" Lightweight Tripod amzn.to/33OO7nd
Main Camera Mic: Azden SMX-15 amzn.to/3glkrCJ
Back-up Mic: Rode VideoMicro amzn.to/2MxDsoC
GoPro Skeleton Cases: amzn.to/35tkt7l
Polarized Lenses: B+W Circular Polarizer amzn.to/34EJnoE
Lens Cleaning Kit: amzn.to/3ld6GIy
GoPro Jaws Flex Clamp: amzn.to/3fBfNlm
Camera Powering Accesories:
Switronix GoPro Power Cables: amzn.to/2oAOz8c
Anker USB C Cord: amzn.to/33Q8mRr
Anker Portable Charger: amzn.to/35x7dhR
Milwaukee 18v 5.0 Battery: amzn.to/33lqbJ2
Milwaukee 18v USB: amzn.to/3bydVqk
Milwaukee 12v USB: amzn.to/2R6UBsz
Lighting:
Light Umbrella Kit: amzn.to/2vZGwpq
Main Camera Light: amzn.to/31gxcKn
Editing Program:
Cyberlink Power Director amzn.to/2IMT5HF
Editing Computer:
HP Envy Laptop amzn.to/2MFgBrr
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting Angling Anarchy so I can continue to provide you with free content each week!
Music: Homer Said - Dyalla : RU-vid Audio Library

Опубликовано:

12 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 28

@giovanni_soto Год назад

Nice build and idea. You gave me a lot to think about for my own build. So many great ideas out there so thanks for sharing yours. 👍🏼

@AnglingAnarchy Год назад

Giovanni Soto I'm glad the video was of some utility to you! I appreciate you watching!

@MattVavrochFishing 2 года назад

Awesome video dude! This should be pretty helpful for a lot of people looking to get on the ice!

@AnglingAnarchy 2 года назад

Matt Vavroch Fishing Thanks dude! It was fun to do and it turns out that it worked pretty well the first time I tried it!

@mitchellgenz1373 2 года назад

Great idea, and video Brian, now get on that trophy case.

@AnglingAnarchy 2 года назад

Mitchell Genz lol that'll be my next big build 😁

@mrgeno4682 Год назад

I am going to do this with some conduit out in my shed🥰

@AnglingAnarchy Год назад

Mr Geno Good luck with your project!

@xxgg Год назад

Have you ever thought of using the existing ski boot mount? So you that you can click on the sled leg to it. Sure it'll end up being only 2 legs than but you can simply come up with some sort fo quick attach leg to the bottom of the sled too, like a table leg... so that it'll rest on another part of the ski to distribute the weight better without having to permanenetly attach those legs to the skis. ?? I myself is trying to think of something really simply, LIGHT weight.

@AnglingAnarchy Год назад

xx mike I think the problem with using the existing ski boot mount would be that it's in the center of the ski, unless of course you moved it. The 2 legs attached to the skis was the best solution I could come up with that would let me completely detach it from the sled, but I'm sure there are other solutions that would work!

@Xng88 Год назад

Since ski blade are expensive. I just went and use a snowboard and center in my sled and mount in the middle with a 3/8 nuts washer n screw n both sides and that's it.

@timlisi871 10 месяцев назад

Nice job, how did it hold up last year? Maybe you could build a 2nd set of legs with castor wheels on the bottom instead of skis to get the sled from the parking lot to the ice without tearing up the sled or the skis? Or maybe clamp wheels to the bottoms of the skis?

@AnglingAnarchy 10 месяцев назад

@timlisi871 It held up very well last year! I guess I never considered an extra set with wheels because pretty much all of the places I go, I can get the sled directly onto snow or at least grass right away.

@seanketcham 2 года назад

You build things like this on the weekends. I built an egg sandwich. The gap in DIY talent is irritating. That being said, since you’re so much better, you should finish my boat rebuild. By March please, if you don’t mind. Thanks in advance.

@AnglingAnarchy 2 года назад

Sean Ketcham The problem is that I have these ideas for non important projects that usually win out over things I should actually be doing around the house lol

@seanketcham 2 года назад

@@AnglingAnarchy same here. Hence me making an egg sandwich instead of getting my boat ready for March Spring Lake muskies.

@thelonesomefisherman7425 2 года назад

Would a middle ski help load weight distribution? Just a thought I had. Don't know what you pull the boat with but if it's a pickup truck with a topper/cap I'd like to see you do a DIY camper build in the truck bed.

@AnglingAnarchy 2 года назад

The Lonesome Fisherman I used to do a little truck camping with my old Silverado that had a 6.5' bed. My new truck is a crew cab with a 5.5' bed so it would be a little cramped lol. I like the idea though! 😁

@thelonesomefisherman7425 2 года назад

@@AnglingAnarchy Yeah, that would be a short bed for sleeping. I would like to do it too but I don't have the power tools or the skills.

@mr.shadestrains6033 5 месяцев назад

Awsum!!!!!!!!! “;-)”🎣

@xv1670 2 года назад

This build seems more appropriate for a jet sled only build. Setup and takedown seems like it would be a pain with a fully loaded 2 man shanty with gear.

@AnglingAnarchy 2 года назад

X V If the shanty is really loaded up, it may require the removal of a few of the heavier objects. I recently used the setup and the only thing I took out of the shanty was my electric auger. All depends on what you feel comfortable lifting.

@xv1670 2 года назад

@Angling Anarchy I've yet to learn how to pack lightly, so it would definitely be a problem for me, lol.

@AnglingAnarchy 2 года назад

@@xv1670 lol I know the feeling 😅

@lifeisfuneh 2 года назад

...next project: Brian is making sled out of his boat! Hit the LIKE and Subscribe button in order not to miss this user requested video :) !

@AnglingAnarchy 2 года назад

LifeIsFun Don't tempt me lol 😆

@johnrapchuk6485 2 года назад

Like the design, however smitty sleds work far better if you use Downhill skis not cross country, Down hill skis distribute the weight better and ride on top of the snow far better the cross country. Your smitty sled will preform far better with an old pair of downhill skis.

@AnglingAnarchy 2 года назад

john rapchuck Yup, I figured as much. I was just using what I already had sitting around the house. I think I may have mentioned somewhere in the body of the video that downhill skis would work better. Thanks for watching!