SNIK chainsaw mill video 3

Подписаться 2,2 тыс.

Просмотров 415 тыс.

50% 1

Video and Sideshow
00:35 Cutting birch lumber
01:35 Adjusting the feeding speed
01:58 26 inch chainsaw bar
02:42 Cutting 2,5 mm Veneer
04:22 Nose wheel lubrication
04:33 50 kg, magnet
04:43 Automatic feeding speed
04:59 0-15 m/min. friction drive
05:20 Friction drive parts
05:30 Modified 404" drive
05:38 Oregon S 91 Pico saw chain
05:51 Mechanical Clutch
06:16 Micro switch feeding engine
06:58 Lubrication pump 10 bar
07:14 M18 x 4 trapezoidal threads
07:45 8 pole elevator motor
07:58 Saw arbor bearing portion
08:12 500 mm 20 inches saw cut
08:50 The engine runs 100% overload 30A
Thank You for watching.

Наука

Опубликовано:

12 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 129

@leviathan2385 8 лет назад

That's one nice mill. Thanks for sharing.

@Svendus 8 лет назад

+David Brant Thank You for Watching

@johnanderson1994 4 года назад

How do you get it to run a chain

@kennethperian4370 2 года назад

Very nice setup, wish I had one build it right right if I had it all on paper. Well good job showing the parts you used and how it worked so well see ya on the next one have a great day.

@M3rVsT4H 7 лет назад

A fine machine you have there, thanks for the video.

@Svendus 7 лет назад

Thank You for watching

@linuxxxunil 6 лет назад

Thank you for having me

@carytowncat 4 года назад

Why am i loving the chainsaw mill way morr than the bandsaw ? My engineering mind LOVES the simplicity of it! Sooo cool! Plan to build me one this month :)

@Svendus 4 года назад

carytowncat Small band saws with 32 mm blades are suffering from wavy cuts when the blade becomes dull and unsharp, and big saws with 75 mm blades become rather costly , cutting into a nail with a chainsaw are not a catastrophe the chain are often repaired in a couple off minutes 👍

@carytowncat 4 года назад

@@Svendus thanks Svend :)

@joelclaflin2428 8 лет назад

Very nice, Awesome power and a clean, quit cut.

@Svendus 8 лет назад

+Joel Claflin Yes the 2.5 mm veneer can be used it onely need a little sanding to be smooth but it is more waste than veneer with a 7mm saw cut :-) Thank You for Watching

@TNtreenet 8 лет назад

Fantastic mill.

@Svendus 8 лет назад

+TNtree.net Thank You Yes it is and a great pleasure to be able to handle huge logs and saw boards in high precision dimensions that You need in the workshop

@seamuskelly 4 года назад

best mill i have seen

@carytowncat 4 года назад

Yep same!

@baratagator 3 года назад

beautiful work, congratulations and success.

@Svendus 3 года назад

Thank You for Watching

@Dc_tech386 5 лет назад

I realize that this motor chainsaw mix work better then actually chainsaw it self

@tutekohe1361 2 года назад

That chain seems to be running very fast. “Chain-shot” must be a real hazard. Nice mill, fast cutting.

@Svendus 2 года назад

We actually newer had a Chain-shot in nearly 30 years, but had on or two broken (thin 6mm pico chains) and they were caught by the safety U bracket mounted on the bar root together with the saw-bar nuts, but newer on a 3/8 standard Oregon ripping chain they are pretty 💪 strong. Thank you for Watching

@Paszko5 7 лет назад

Super, bardzo precyzyjnie wykonany ten trak.Oczy moje się cieszą aż dostałem natchnienia i sam wykonuję taki sam.Wzór do naśladowania w precyzji. Oglądałem ten film z wielkim zaangażowaniem i analizowaniem.Czeka mnie wysokie wyzwanie. Dzięki Panu doczekam się finału.Mam odczucie jakbym był tam przy Panu i z wielką pasją go obsługiwał.Pozazdrościć ! Pozdrawiam i życzę bardzo dużo "zdrówka".

@Svendus 7 лет назад

Please write comments in English dziękuję Marek

@kazimierzbankowski6182 5 лет назад

Marek Paszkiewicz witam.tez sie napatrzylem i robie juz 2 lata ale niedlugo koniec. Ile kw ma silnik i jalie obroty?

@advancednutritioninc908 7 лет назад

Brilliant! Amazing Engineering! Well Done! I wondered how you got the chain speed up so high (by the sawdust) - 10 bar on the oil and near perfect alignment !! Is that a 10hp motor? Wishing You much Success!! Masterful Craftsmanship!!

@Svendus 7 лет назад

Advanced Nutrition Inc Thank you yes it is a Brook Crompton Parkinson Argus 55+ 7,5 kw it runs with 100% overload 30 amp Saw spindle runs at 8000 rpm Saw spindle driving at 8000 rpm minute chain speed 20 ms

@ncep4095 3 года назад

great job

@caljarvis 6 лет назад

thank you that was real cool

@Svendus 6 лет назад

Thank You for Watching

@caljarvis 6 лет назад

nice two see a chain saw doing more then a snail pace in a log granddad would have loved it he ordered his gang saw from Sweden he came from yarvos think theirs a few dots in there but loved milling

@kangkasbun1624 Год назад

Good job👍🏻💪🏻💪🏻

@artregeous 5 лет назад

beautiful

@evankeck5568 3 года назад

Hello Svend, incredible mill you've built yourself there! I was hoping you could further explain how you force your motor to run at 100% overload? I've read previous comments and if I understand correctly you run a 30 amp breaker. So 15Kw (7.5Kw x 2) at 230v should trip that breaker quite quickly shouldn't it?

@Svendus 3 года назад

The motor is a AGUS 55+ 400 volt industrial, that means it is built to run with 55% overload continuously on the mill it runs intermittent 100% overload and you do not have any asynchrony sound that normally are heard from 3 phase overloading the motor are protected with temperature censors in the the winding of the motor the motor become warm but not hot and it cools down when the clutch are free and not connected to the saw chain it has actuality newer switched off do to overheating.

@brettsoutar8618 8 лет назад

Hi Svendis this a self built mill or can they be purchased??Great mill

@Svendus 8 лет назад

+brett soutar The Mill are custom build for our own needs it was never set in production

@cryptosage9866 6 лет назад

epic rig

@stevewalters6097 6 лет назад

thats awsome

@stevensexton5801 7 лет назад

Can you provide more information on both of the clutches? Did you purchase them or build them? What size is the motors that runs the saw and the carriage?

@smartmedia9 5 лет назад

Thank you.

@jamespayne8781 2 года назад

Well done.

@Svendus 2 года назад

Thank You for watching

@milosnicykonstrukcjiielekt5299 2 года назад

Super!

@gjmariano-ZEDORADIN 5 лет назад

MUITO BOM E EFICIENTE, PARABENS MAIS UM INSCRITO FELIZ ANO NOVO

@Svendus 5 лет назад

The Same to You thank you for watching

@gjmariano-ZEDORADIN 5 лет назад

@@Svendus MUITO bom um abraço

@josuealmeida7245 2 года назад

Eu vou fazer uma igual a sua Ze Doradin. E mais simples e eu já vi lá no seu canal. Abraço! Gosto muito dos seus vídeos

@marcelodias5324 Год назад

Muito bom a máquina ta de parabéns conquistou meu respeito quando mostrou a espessura fina do corte imprecionante agora a durabilidade da frente de corte e carretilha ali do sambo ! Tu já sabe ? Muito obrigado pelo vidio

@Svendus Год назад

all right we do not understand portuguese 🤢

@buddystark9333 3 года назад

Phenomenal design! I want to build one like this, only with gasoline engine I have. If I were to provide you with an e-mail, would you send me some pictures, for reference so I can build one like it?

@MrThenry1988 3 года назад

Might whip a band saw.

@Svendus 9 лет назад

Note! to get up the chain saw speed, a big motor wont do alone You have to modify the saw chain riders from 0,65 mm to 1mm tighten the chain tension and lubricate the nose wheel from within the needle bearing

@chrisdunham7169 5 лет назад

Hi Svend, great machine you've built there, well done. Could you explain to me what you mean by 'riders' or what part of the chain these are ?

@Svendus 4 года назад

Chris Dunham Depth gauges, "riders," or "rakers," as they are sometimes called, control the amount of wood severed by a cutter tooth. During the life of a pro saw chain, they occasionally need maintenance for top cutting performance. ... Each time the chain is sharpened, the top corner of the cutter tooth gets lower

@melvinjohnson7981 9 месяцев назад

With the auto feed does the chainsaw mill cut smooth? Nice mill!

@Svendus 9 месяцев назад

Yes It is 0-15m/min when the feed pressure once sett , the saw speed will automatically adjust to the with of the saw cut👍

@paulbertsch7540 6 лет назад

Awesome. What horsepower motor is that?

@Svendus 6 лет назад

Paul Bertsch it is 7,5 Kw (10hp) Compton and Parkinson A55 run @ 100% overload Thank you for watching

@user-it8ij6yo3k 3 года назад

good👍👍👍

@user-cl5fl2rt8m 3 года назад

Svend, please tell me what is the step of the chain on the automatic drive of your sawmill?

@svendusmcveteraner 3 года назад

The feeding are infinite friction drive 0-15 m/min Spindelspeed 8000 rpm the highest allowed on SKF 62 series DDU ball bearings the chain are 3/8” Origon Ripping chain

@evankeck5568 Год назад

Hey Svend, in the video you say you use a modified 404 sprocket to run the oregon s91 chain. In the comments you mention you use a 3/8 8 tooth sprocket. I was hoping you could describe how you modified the 404 sprocket? Or does a standard 3/8 sprocket work fine with that picco chain? Thanks

@Svendus Год назад

Hej Evan the standard 3/8 ripping chain runs on the standard 3/8 spocket, but not the S91 you se the 404 sprocket in the Video and how it is turned down in the middle to a different diameter to fit the S91 Chain

@Svendus Год назад

A 8 tooth 404 sprocket turned down to 42,2 mm in the middle runs nicely with a 91 S Pico Chain 👍

@evankeck5568 Год назад

@@Svendus Perfect. Thanks for the information!

@michaelwalton9943 6 лет назад

Could you be detailed about the pulley sizes the clutch and the magnet/oiler please I read the other comments about the motor

@Svendus 6 лет назад

Hi Michael the Pulley are 2 Z V belt. The clutch are a single coupling lamell from a VOLVO 240 200mm in diameter. Spindle speed are 8000 rpm. The max speed for 63 series ball bearings with DDU seals. The Chain speed is 20 m/s. with a 3/8 8 teeth sprocket wheel.

@bongthoeun5165 3 года назад

👍👍👍

@gadgethunter5732 4 года назад

Is 26" the largest bar the 10 hp motor can handle?

@Svendus 4 года назад

@gadgethunter on the machine we can mount a 30” but we do not pay for something we do not need here in Sweden. Technically this motor can handle the longest bars available because you can pick out over the double effect 15KW from it 🤔 thank you for watching

@vasilepop4369 4 года назад

Congrats for so nice job.Merry Christmas! How many KW ,V, rtm ,pse ? Tnx ! Vasile

@Svendus 4 года назад

Vasile Pop this information are given in the first video the mill are 7.5 Kw @ 15Kw 100% overloads spindle speed 8000 rpm chain speed 20m/s with a 8 spoke chainwheel thank you for watching 👍

@melvinjohnson7981 9 месяцев назад

I know on my band mill about how often it needs to be sharpened. About how often does the chain need to be resharpend?

@Svendus 9 месяцев назад

We sharpen the chain when the sawdust become just dust there are no fast roules it depends on the wood and how dirty the bark on the log are

@melvinjohnson7981 9 месяцев назад

It's the same on my Bandsaw, but I didn't want to have to sharpen a chain after every log. That may or may not be the case on a chainsaw mill, I just honestly don't know about them? But, thought they might work well? May be easier to sharpen while in the field? You've got a really nice mill.

@Svendus 9 месяцев назад

@@melvinjohnson7981 Thank You we are planning a circular HM cutter to clean the bark before the saw chain enters the log like on the professional bandsaws to day we clean the log on the bark side where saw chain enters the log and sharpening are easy made on the mill with a small 5,5 mm electric grinder

@MegaCair 3 года назад

the pressure is higher on the saber FORCE BUT?: using the middle of the saber on an 80 cm log or close to this length? OR USING THE MIDDLE OF THE SABER TIP DOES THE CUT STAY BUT SMOOTH CUT BUT FAST FREE?

@Svendus 3 года назад

You are not clear we do not understand your Question But Thank You For Watching 👍

@JosEPh-zy3yr Год назад

Are you using a ripping chain vs a regular chainsaw chain?

@Svendus Год назад

we use a 15 degree ripping chain thank you for watching

@MegaCair 3 года назад

what power of this engine used?

@Svendus 3 года назад

Please check video Number one 👍

@den0matic 2 года назад

Can you cut in both directions?

@Svendus 2 года назад

Yes we can cut light cuts backwards but the Nose wheel do not stand the full power from the engine ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-tbN29YCcwIo.html Thank You for watching

@echarters 9 лет назад

u can't cut both ways?

@Svendus 9 лет назад

Eric Charters Yes it cuts both ways but the installed effect (15Kw) is to much fore the nose wheel to cut with full load backwards. But we often manually cut light cuts backwards ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-tbN29YCcwIo.htmlm11s

@vieuxsangare3229 3 года назад

Démonté

@echarters 9 лет назад

How mucho kronerski for mill?

@Svendus 9 лет назад

Eric Charters Please write in English Eric

@duniagrandong4x472 2 года назад

👍👍👍👍

@Svendus 2 года назад

Thank You for watching

@jmiltonbarrios 5 лет назад

Somebody know how many rpm is going the chainsaw

@Svendus 5 лет назад

Milton Joel Barrios it depends on the sprocket here it is a 8 teeth 3/8” @ 8000 rpm. it gives a chain speed around 20 m/ps

@ignaciopiqueras7474 3 года назад

Acuantas revoluciones trabaja el motor

@Svendus 3 года назад

Please write ✍️ in English Thank You for watching

@bubbaperry9419 3 года назад

Is this commercial made or homemade sawmill

@Svendus 3 года назад

it is all Home made Thank You for Watching.

@stanlysangma2840 6 лет назад

Amazing , How make 0-15 m/min. Friction drive ? And small motor is how much (hp) ?

@Svendus 6 лет назад

yang chang Hi could you please describe little more what you mean Thank you for watching

@pikboj 8 лет назад

Greath mill haw much is power of engine

@Svendus 8 лет назад

+stivi s Yes the Saw motor are aluminum build weight 50 Kg we had to balance it with led ballast in the saw portal pillar opposite side of the motor to make it stand on all 6 wheels

@mikelamothesr.8998 8 лет назад

+Svend Nielsen, he was asking the hp rating of the electric motor you are using. I would imagine he will be working in Kw not hp but he can do the math.

@Svendus 8 лет назад

+Mike Lamothe all right Sorry as said before 7.5 KW running intermittently with 100% overload 30A 15Kw the motor are a Brook Crompton Parkinson Argus 55 (55 means that the electric motor can be overloaded 55% continuously ) ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-IqzI3xNYqz4.html

@advancednutritioninc908 7 лет назад

7.5kw = right about 10 hp which is equal to at least 20 hp gas engine. But he is overloading to 15kw to he is using 20hp electric which is about equal to 40 hp gas.

@ignaciopiqueras7474 3 года назад

Cuántas revoluciónes tiene el motor

@Svendus 3 года назад

Please write in English Thank You for watching

@palomo1ful Год назад

How can I get the plans to build one

@Svendus Год назад

no plans were made we have build a 6 m 7,5 kw and a 7,5 m 11 kw SNIK mill

@MegaCair 3 года назад

quantos cm tem essa barra ? de sabre?

@Svendus 3 года назад

1:48 please write in English

@MegaCair 3 года назад

oque seria isso ? Brook Crompton Parkinson Argus 55+ 7,5 kw que funciona com 100% de sobrecarga 30 amperes O fuso da serra funciona a 8.000 rpm. ???

@MegaCair 3 года назад

oque seria esse brook crompton parkinson ? e os demais...

@rogermater587 3 года назад

Do you have prints or plans for this unit?

@Svendus 3 года назад

No sir the mill was built from fantasy Thank You for Watching

@johnvoght2543 3 года назад

why can't you cut both ways

@Svendus 3 года назад

you can cut both ways but 15 kw. are to much power for the nose wheel, but light cuts are functioning. Thank You for Watching

@hiran05599 2 года назад

Help me. 6.16 min. What?

@Svendus 2 года назад

The Microswitch are electric connected to the oil pump and feeding motor both are operated by the mechanical clutch turns of the feeding and chain oiling when the saw chain 🛑 Stops