SNOOPS LOWRIDER SUSPENSION FINALLY FIXED!!!! BUT FOR HOW LONG? 

Thanks for letting us get involved! Dope car, can’t wait to see it soon!

Small flicks on the switches don’t hold them down

Tap the switches don’t hold it all the way up easy way to burn out pumps .. always tap switches up

11mins "guys I have been using Axel stands" Proceeds to crawl under car with camera, not an Axel stand in sight 😅🤦🏼‍♂️

If you have problems with the car staying up. Even though you've changed seals in the cylinders, most likely. It's the check valves in the reds pumps that you have, they were known for not holding pressure with their built-in internal check valves In my opinion, they were junk.

The rear cylinders are not set up correctly. The cylinder should have a power ball mounted on the axle so then the cylinder can be bolted to the power ball, the coil should be on top of the cylinder to the coil pocket in the frame. Now in the front you have those bent up round plate on the cylinders those are called donuts, after they bend so far it will fail and the cylinder will break through the frame and smash into the hood causing all kinds of damage. You need to reinforce the front spring pockets.

@laynplay to the rescue of another lowrider !! best in the business

Wow, dude! Act as if you're touching a hot frying pan, is how you work the switches.

If the frame is not reinforced properly I wouldnt try to hop it but baby it to be honest with ya.

hydro fab work is soooooooooo bad..... every one i've ever seen. how those things dont just fall apart every drive, idk. :shakeshead

5 minutes in and I'll bet I'm not the only person screaming AXLE STANDS!!

2 pump wont make you hop

😂😂😂Boy's and there toys😂its amazing what makes us happy brilliant 😂😂🎉

Still not used to hearing the cylinders called “rams” lol Made me nervous hitting a hard side to side w the door open. Glad no one’s foot caught the corner of the door on its way down. Love the car. Great vids, keep em coming

gutted to see the Countach is going to auction, be a shame to see it go.

Where’s the black eye and scar come from?

Please learn how to flick the switch and how to actually hop before you blow the pumps or the batteries in the back coming from American cuz it is very easy to do. You're going to wind up costing yourself a lot of extra money if you don't flick that switch and that's how you get it to actually hop which is not a hopper because it doesn't have enough tanks in the back or enough batteries but it will get off the ground

Sam - I'm glad to hear you were using stands. I had a jack collapse under a Kia Sportage once and it managed to trap my arm. I got away with a large scar and a huge sense of gratitude that I wasn't badly injured. Just got left with a big scar on my elbow. I was stupid and urge others not to be. You may not be so lucky. Enjoying this series, greatly.

Cool channel! U guys are awesome!

To be frank you would have to be called frank ;)

In all my years watching RU-vid and all the channels I subscribe to and all the comments I have posted you guys are THE FIRST to ever respond! That's why your the coolest and me and my daughter's favorite automotive channel so please keep the interesting and AWSOME projects coming! We both learn a lot from watching. Thanks so much!

Seeing you loose it when it works as brilliant

Goggles nah, the look the other way or safety squint are totally acceptable forms of PPE 😅

You have to smoke a blunt in this thing..!

Need to clean those finger prints off the lense boys.....NEXT steps is getting those old school paper VEGAS to pound. I had the exact ones back in the early 2k...only 2 of them. Oh they were nice. Id still take those and my Celestion FTR12-4080HDX (12's) Over most new crap out there. Was something about that paper when it hit that new plastics dont give for having only a couple subs....enjoy them.

Snoops gonna want it back🎉 💪🏾💯🏁🔥

There's low riders and there are floor riders!

(RAM) 😡😡 CYLINDER 👊🏽 hurry up and sell this car PLEASE....

The ram. It called a stroke

Caddy is "Body on frame" whereas the old "NASCharger" would've been unibody from the factory.

# Got Hydrau' @ Hard Up 👆🏻 #Snoop~Dropped~Deville

G'day from Australia 👍🇦🇺

loled a lot during this episode @Sam!

Looking good.

Is that a Jensen in the background? 👀

have you thought about making the LayNPlay Banner any bigger on the screen so we cant see what you are actually doing?? also when you recorded the last video part atleast clean the lens first or just delete this video