This just came up on my RU-vid feed I have watched most of your videos in the past. and I just wanted to tell you that you have the absolute BEST systems on your truck and you put out the most informative videos on soft/power washing on the internet. Thank You !
That garden rinse gun is bad ass.. I personally don't perfect anything higher than 4gpm when applying sauce. For rince and surface cleaning its good to have 8-12 gpm just my opinion.. I have been roof cleaning using a typhoon back pack thats only 1 gpm using lithium 18v battery..this back pack uses a pressure washer wand allows me to use any tip but comes with a good tip I use dawn Soap in my SH they say not good but it keeps my sauce from sliding off the roof it works in well I never have to rinse I do all my pre rinsing first.. I admire your rigg by the way seen one very simikar down here in SWFL pretty badazz
@@rylemckendrick3246 bru that was a totally bad bad idea 😂😂😂😂.. I'm not even roof cleaning anymore.. monthly window, gutter, & Lanai cleanings are what we're doing now. for our customers.
Will do buddy. I have a big job this week and then when we get that check in I’ll start buying to items. You’re set up is bad ass. We won’t be that big yet. I’m looking at getting a 7gpm 12v pump and 200ft of softwash hose. We have a small 4gpm pressure washer but it’s getting the jobs for now. I’m always looking to reinvest to upgrade as we grow.
Young Ambition Soft Wash thanks man. We’re having a delay on the delivery but hoping to have it hooked up by next week. Also have to order 200 ft soft wash hose.
My company is really starting to grow. Might be upgrading this summer. We are currently running a 5.5 hpm honda for house washing and concrete cleaning. We 12 v 5.5 gpm wash roofs with the GP valve blend manifold. What would be your advice woth 5 k or so budget for our next upgrade. Would you go 8 gpm, ar 45 or what?
What is that system called on your truck with the pipes and nozzels. I just stumbled upon this soft washing stuff this morning and want to know how to do it. Essentially my pressure washer doesn't have a water tank, and my generator is just a generator, so I need to know what I need to mix the chemicals in order to spray them. thanks
What did you use to shoot the roof that far and high? You said a soft wash system??? Just starting out would love to know just what you used... thanks so much!
I was wondering if you used the guns you are showing off of 12v pumps. I have a 7gal pump at 70psi and I have no where near the pressure you just showed. Is there any advice you can give me.
Looks nice! How does it hold up to SH and how often do you need to replace the gun? The blue one that is. What switch are you using to switch from mix to water?
It holds up fine, and you were always flush it with water so it last a pretty long time just make sure that the last time you use the gun it’s on freshwater
How do you think I switch from SH and soaps to rinsing I hit the remote on my neck and it converts it from the tank to the pump that I hit it again and it pulls it from the proportioner through the pump
@@thepressurewasherschannel9109 ignore what I said on that. I really like you setup. I especially like that Blue GP wash-down gun. that thing is badass. I need to get one of those.
With the blue gun at the beginning you mention using a 2 ho 10gpm did I hear that rite? Not sure what you got brother but i would love to use that same system i to am a fan of more water volume over high pressure
@@thepressurewasherschannel9109 how are you getting a 3HP motor to push that volume? what Pump are you using, 12volt, gas diaphragm, air diaphragm? what do you mean booster pump? I have an AR30 with a 6.5hp honda GX200 and that only does 9-10 gpm, so I am very curios and very interested. I also have the same RB65S blue gun and love it, things a beast! Like you cam locks on the hose connections what are the specs for those? I bet they help with flow over quick connects which are smaller and restrictive
@@thepressurewasherschannel9109 It'll take that one idiot neighbor to call the epa. My brother was pressure washing at his job location and a neighbor behind the business noticed soapy water in the drainage area and called the epa. They called a septic company and pumped it out. I put a bilge pump at the bottom of my driveways and it pumps the access water/chemical to an area away from the drains.
I still would like to know how i can order that exact blue soaker that you have and if its not too much trouble the other tips.. but i really would like to have that blue one..
A 1hp booster would be a 7gpm , your 8gpm pw would outperform the booster, I use a 10gpm booster at 2hp & it outperforms my 10gpm pw all day long... lest pressure soakes down the house more effectively
@@thepressurewasherschannel9109 why 3/4 when the soft wash hose is 1/2 inch? Just wondering because I'm about to buy some myself after watching this video.
@@thepressurewasherschannel9109 really I just plumbed my 5.5gpm bleach pump with 1/2 inch. Would your advice be to replace the hose? Thanks for the very fast reply by the way
You should put the link in this one too. A lot of people have asked about it. You are missing on opportunity, if you’re in the Amazon affiliate program.
got an idea how to use a pressure switch without the sh destroying it by using a gauge isolator with a viton seal Marquest or Plastomatic and you will need a air compressor pressure switch at least 200 psi on the outlet side and a check valve on the inlet of the pump.