solid state drive data recovery

Подписаться 141 тыс.

Просмотров 53 тыс.

50% 1

for solid state drive data recovery call: 855.366.4232
or request your service here: www.hddrecovery.ca/contact-us/
Data recovery software PC: www.r-studio.com/downloads/SES...
Data recovery software Mac: www.r-tt.com/?JGKHD000
This solid state drive came in for data recovery after an unsuccessful repair attempt all the way from Germany. The mating point of the SATA connector and the board looked really damaged. We had wired in SATA connector to what was left of traces, but there was a short on VCC to ground plane, and the controller was damaged as a result. Without a working controller, we could have tried to do a chip-off recovery, but there was a faster and more certain way to get the 1000% of the data back.
if you want to ship your failed device to us for data recovery and free evaluation, simply fill out this form: www.hddrecovery.ca/contact-us/
and send your drive boxed with bubble wrap to this address:
HDD Recovery Services
391 Bank St, Suite 201
Ottawa, ON
K2P 1Y3
Canada
Updated 2020 my gear for soldering:
I record all my videos using this HDMI Switcher: amzn.to/31LCsq6
Green inspection light amzn.to/2DFJoYu
Platter extractor: bit.ly/2YhQD2y
Momentary foot pedal switch amzn.to/2OSqjZF
Vacuum pump amzn.to/364XWxa
Cleanroom wipes: amzn.to/2ZLj49G
Programmer amzn.to/2DRjL7a
Quick pogo pin adapter for eepROM amzn.to/33TYVyO
Microscope: amzn.to/2rqWcwr
Vacuum chip pickup tool: amzn.to/2tNCSxc
Multimeter: amzn.to/2EHKAxO
Microscope camera 21mp 60fps 1080P: amzn.to/2Rb5cUq
JBC precision soldering iron and tweezers: amzn.to/33MACm8
Hot air station: amzn.to/2K7Mztk
Infrared preheater: amzn.to/2rYCH1c
Flux dispenser: amzn.to/2spLw4D
BEST Flux: amzn.to/2mXJd1b
Wick: amzn.to/2mNr0Xh
Solder: amzn.to/2mtyC0a
Solder paste for BGA reballing: amzn.to/2LrKQCi
NAND BGA rebelling stencil amzn.to/33Oq9a5
Gloves: amzn.to/2mbHWDI
Fume Extractor (mine is no longer available but this is the new version of the same unit) : amzn.to/2mNCmL7
Gear for filming:
small camera: amzn.to/2mNw51T
big camera: amzn.to/2Ficg9o
Lens on big camera:amzn.to/2Cx3fGw
this video: • 3 best data recovery h...

Наука

Опубликовано:

14 фев 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 162

@Mymatevince 3 года назад

Great video, lovely reball using the paste...a true work of art 👍

@hddrecoveryservices 3 года назад

Thanks

@pawelw4488 3 года назад

This RU-vid Channel is the single most addictive thing I know. I Truly admire your work and hope you will continue doing it. All the best.

@hddrecoveryservices 3 года назад

Haha, thanks Pawel. Glad you like it

@FJsRus 5 месяцев назад

I send other repair channels this channels link, for the posers to send repairs to this channel. This real technician knows what he is doing. And he shares the wealth of knowledge a sign of a true tech.

@Talonan 3 года назад

So nicely explained how recovering of data works

@TheEkoTube 3 года назад

YAAAASSSS!! I WAS WAITING FOR SO LONG!

@wildmanjeff42 3 года назад

thanks for the video, I did a little component level troubleshooting in the late 90s with a tiny bit of LSI on the boards, I liked doing it, though the company did not pay hardly anything. quite impressive what you are able to do with mem modules and SSDs!

@hddrecoveryservices 3 года назад

thank you, :) If you like this repair, then you would love this one ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-KsFKpqVhU88.html the linked case is the pinnacle of my soldering skills to early 2021 :)

@wildmanjeff42 3 года назад

@@hddrecoveryservices I'll check it out

@tobiasmangoma9566 3 года назад

Great. May you keep the cameras zoomed in. We wanna see everything you do for the sake of learning. Thank you.

@bestbuildpc Год назад

Nice work! I am always interesting in your work. Clean and smooth. Amazing.

@Digital-Dan 3 года назад

Your ability to re-ball chips is at the Rachmaninoff III level. It puts your productivity head and shoulders above those who have not fully mastered that process.

@hddrecoveryservices 3 года назад

Rachmaninoff 🤣

@alotl1kevegas860 3 года назад

Great video man. Do you do data recovery on phones? I have a Samsung s9+ that I need to get my pictures and information off of.

@paultomlinson528 3 года назад

Again fantastic work, although I am envious of your steady hand.. I was working on a BGA 128GB single nand device although its turned into a nand read ...

@hddrecoveryservices 3 года назад

anything over 64GB is just a such a long process for chip-off... fix is still king for me

@daand12 3 года назад

Seems like a older version of the current Sandisk SSD Plus drives. Newer ones use SM2258XT controller, i've heard that the data gets corrupted very quickly on these. I have a 512GB Orico SSD with SanDisk SSD plus components inside ( SM2258XT + SanDisk nand ). Very good ssd, but wouldn't use that as daily drive.

@jamesprocter102 3 года назад

Your work is art

@hddrecoveryservices 3 года назад

@derinpiano9948 3 года назад

thank you

@jaimcgee4566 3 года назад

Awesome I would like to learn more about data recovery, you are awesome

@hddrecoveryservices 3 года назад

Thanks. You are in the right place for that

2 года назад

I love your work 🔥🔥🔥

@hddrecoveryservices 2 года назад

Thanks dude

@rosariodagosto6484 6 месяцев назад

YOU DID A GREAT JOB WITH REWORK ON CHIPS 😊😊

@hddrecoveryservices 6 месяцев назад

Thanks bro

@MrLollko 3 года назад

that was a masterpiece :), i really like your videos , more specialist like you

@hddrecoveryservices 3 года назад

Thanks

@varmint243davev7 3 года назад

impressive, as always

@hddrecoveryservices 3 года назад

🤙

@cocobongo268 3 года назад

Erkin, hellow man. You are making a tremendous effort in order to make this videos... We all see it, keep going on... is worth it.

@johnbaker26 2 года назад

How do you know which SSDs use the encryption protocols?

@billysbikes8671 2 года назад

ive got an an about 2012 macbook ssd the macbook died and the controller chip was getting really hot there seems to be a missing component maybe a capacitor but otherwise it looks ok! could i do a simillar thing or are macbook boot hdd's likely to have encryption or something that would stop this from working? the data i want is mainly c++ programming ive spent hours on for personal projects so its probably not worth the expense of paying for recovery but i would like to have it as i built some custom libraries i would love to use again! i am ok with soldering and electronics but fault finding a board is over my head this seems like an achievable solution?

@wahidgm9605 3 года назад

I got a question is it possible and safe to use that drive like normally like every day use

@K3nBlock 3 года назад

Great Job!

@bogarleffe 2 года назад

Thanks for the video. I once asked you what flash brands you finds most reliable and easy to recover data from and you suggested Sandisk and Lexar. Is those brands also the same high standards when it comes to m.2 SATA and NVMe drives?

@hddrecoveryservices 2 года назад

Somewhat. But honestly, the only SSDs I had issues with were all made by Samsung

@Baljetfox 2 года назад

How much would you charge for a procedure just like this?

@pr0xZen 3 года назад

Good work as always. Looked like someone went at that port with a car panel type iron and no flux 😒 - Good to see people succeed. Just home after a long day, spent 3 hours trying to rejoin a fully torn flex cable for a fingerprint sensor on a Pixel, 13 traces torn so the jumpers had to curve at rounded 90 degrees. Did not succeed. I finally got around to ordering one of those sweet board holders after seeing you using it (the red one). Question: What's the new paste? Is it the MG 4860p in description? It looks pretty good - you think it'll do ok for 0.15-0.2mm pitch stencils?

@hddrecoveryservices 3 года назад

paste is actually PPD Pro. S260 lead free

@pr0xZen 3 года назад

@@hddrecoveryservices 138°C Tin/Bismuth blend? Is it a "true" paste or "granulates" in flux suspension?

@Left-Handed-Cat 3 года назад

I wonder if there are WhatsApp groups or similar social networks out there, where non- / semi- / full professionals can talk and share knowledge to learn from each other. Does somebody know such a community? Best regards! PS: Awesome video as always Erkin! Keep up your great work!

@mgthet9226 3 года назад

nice man easy jtag plus me used for mobile repair

@j.lietka9406 3 года назад

Is R-Studio a free program? If you have a SATA 3 SSD & just want to see what's on it, and/or determine the condition (how much life is left) of it, will the same procedure - minus the controller swap -work?🤔 Does R-Studio also evaluate M.2 drives? Thanks 🤓

@WeFixTvs 3 года назад

good job, more videos please

@R007RCL 6 месяцев назад

Just wondering, how high a temperature and air flow on the hot air do you use for the unsoldering of the controllers.

@hddrecoveryservices 6 месяцев назад

60air 365-380c depending on the board size

@msunclekevin714 3 года назад

I got m2 ssd 2280 sandisk 256 gb how to access factory mode or where are these safe Mode pins. Its unrecogbizable and didnt find the way for this model to get in safe Mode. Hddguru forums dont allow registeation to ask.

@laolalock909 3 года назад

What paste are you using for reballing? What metal ingredient has it and what melting point?

@You-qb9wn Год назад

He is using uranium paste and iridium metal and the melting point is 3500 degree Celsius

@andresbudihardja 3 года назад

whats brand flux recommended

@WESSAMIRAQ 2 года назад

bro i have dead ssd and its hade one memory chip and tow slot can it work if i install the chip in another seam model ssd ?

@paolomalabo6059 3 года назад

Great job as always. Got a problem. I accidently formatted my 2TB WD Gold with DISKPART. All commands were inputted and executed. I have tried various recovery software but no luck on recovering anything. As in zero data from before it was formatted. The disk is working fine. Any advise you can give me that I can do. Any hardware you can recommend i can use.

@justinupshaw672 2 года назад

How did this turn out?

@BlueBerry-fp5rb 3 года назад

can u tell me how much and where can i buy recovery tools for ssd hdd ...im from asia

@Talonan 3 года назад

Can you recover and revive my m.2 ssd 256gb ADATA8200xpg, it detects but it has different code name sm22 instead of adata and it shows 1.0gb instead of 256gb, later on when the computer programmed when mbr it shows 1023mb but when gpt it shows 2048gb, i dont know how it happened because it was just so sudden.

@itsalwaysfake Год назад

Hi, very good work! I have the same problem and will do the same like you. I have some test SSD but it will not work. Maybe you can help me. How high is the temperature on the fan? How long do you preheat? What is the melting point of your paste, maybe I need a other paste. And most interesting, when is the RAM overheated and can not work? Other component's on my SSD will also melt and swim away, its a mass...

@asmedeus448 2 года назад

can you recover data from HDD that has been formatted and then accidently install window?

@hddrecoveryservices 2 года назад

yep

@Alan_Skywalker 3 года назад

Then what will you do with the flash chips on the doner drives? They do worth some money.

@hddrecoveryservices 3 года назад

Nothing, they are not worth anything to me

@Alan_Skywalker 3 года назад

@@hddrecoveryservices Then maybe you should consider using them to build USB drives if you have a lot of them. A normal USB PCBA should cost about one to two dollars while one with good controllers like SM3280 is no more than 5. Then you can build USB drives that both have better quality(higher binned chips) and way larger and faster than something you normally see on the market(e.g. SM3280 can go over 400MB/s). And the soldering time per drive should be less than 3 minutes. After this you only need to plug it in and let it automatically sort and MP on the background. No need to leave some good chips to waste.

@alihussaini445 3 года назад

Hello I am ali from Afghanistan could you make a video about samsung external drive how to repair to fine the problem or how to diagnostic or terablshoting a labtop hard drive. thank's pleases

@arifikhsanudin9724 3 года назад

What do you do if the memory chip is broken inside?

@hddrecoveryservices 3 года назад

Nothing

@SnakeCakeExotics 11 месяцев назад

I have an ssd with 2 dead resistors. it powers up and shows the drive and letter but doeswnt show how much is in and doesnt load. so no access. I've seen the same happen with capacitors and they remove them and it works but for resistors is it the same I do I need to fully replace? Trying data recovery is just annoying cause I know it's a hardware problem just don't know if I can replace something so small. I ordered some solder paste

@hddrecoveryservices 11 месяцев назад

Simple answer would be no. You can't remove the resistor if it burnt and expect the unit to work. Burnt resistor - is essentially a self removed resistor

@SnakeCakeExotics 11 месяцев назад

thanks, Hopefully replacing them will sort me out! @@hddrecoveryservices

@justw4lkbesideme 2 года назад

Which one u recommend ssd or konvensional hard drive? For longest use

@hddrecoveryservices 2 года назад

CMR hard drive if you can still get them

@likeswords9828 3 года назад

excelent !

@FinboySlick 3 года назад

What is the risk of degrading the data by warming up the NAND chips? It didn't seem very high as you didn't mention it in opposition to the risk of frying the new controller on the potentially shorted board.

@hddrecoveryservices 3 года назад

Not high to be honest. I don't go over 390c

@miken1299 2 года назад

I have an Aorus NVME gen 4 1TB SSD that just randomly died and wouldn’t boot up after. I have years of work on it and took it to a data recovery centre and they said it’s unrecoverable since it’s not a supported chipset. I feel helpless as i’ve lost thousands of hours of work.

@hddrecoveryservices 2 года назад

hey, did we recover this one for you? if not we can do it drop us a line: www.hddrecovery.ca/contact-us

@miken1299 2 года назад

@@hddrecoveryservices hey, yeah it’s Michael you guys recovered it for me!

@mariussm7797 Год назад

So after all this, the SSD is fully working again just the way it was? Or did you recovered the data and move it?

@hddrecoveryservices Год назад

We get paid or getting the data back, device itself is not meant for continuous use. I pull data from it, data goes onto a new device, new devices goes to client after I get paid

@mariussm7797 Год назад

@@hddrecoveryservices thanks for the answer 😁

@mariussm7797 Год назад

@@hddrecoveryservices I'm back with one question. So I have an SSD Kingston A400 that suddenly became uninitialized. I was using this SSD with a case enclosure on my old PC. Now I have tried everything: initializing from disk management, trying to format it, recover data, and so on, nothing works. I can only see it in Disk Management as not initialized and unallocated. But CrystalDiskInfo shows all attributes as GOOD when checking the SSD. So I think the memory on it and data is ok, but something is wrong with my logic board too. Do you think I'm right? Because I doubt CrystalDiskInfo or other program will show good S.M.A.R.T. attributes, if the SSD would've been dead.

@tonyd6853 Год назад

where do you get the stencil?

@hddrecoveryservices Год назад

eBay

@awilliams1701 3 года назад

holy crap I figured SATA drives had a full size PCB to just load it up with NAND chips. That looks like it's half the size. I still can't get over how small NVME drives are. I just installed my first NVME drive ever recently into my new computer. I bought it back in november though. It's a samsung 980 pro and the stock was limited so I bought mine as quickly as possible so I'd have it for when I'm able to get my Ryzen 5900x.............which I temporarily gave up on and put in a 3600 instead. I was just sick and tired of my I7-2600 especially after I got a new laptop that was kicking my desktop's ass.

@hddrecoveryservices 3 года назад

some do have a full size PCB, some even have a 3.5" size PCB :)

@awilliams1701 3 года назад

@@hddrecoveryservices my old computer had a Samsung 830. Its 9 years old and still works. Maybe its a full size. It is 512gb which was a lot back then.

@FinboySlick 3 года назад

You ever deal with dead 850 Pros? Have a stack of 6 here that aren't even detected. I suspect a failed firmware upgrade bricked them. Not interested in recovering the data, just wondering if they're just paperweight. Could be a fun project for me to explore ssd recovery.

@hddrecoveryservices 3 года назад

850pro is doable even with firmware issues. Do you want to use them again? Or data is needed?

@FinboySlick 3 года назад

It's just to use them again, I don't need the data. I was just curious if it is possible to fix them myself. All six seem to have the exact same problem.

@hddrecoveryservices 3 года назад

Yeah, restore microcode can be written

@FinboySlick 3 года назад

Just need to figure out how. I have a 1.8v compliant serial and I may cobble up a jtag adapter but I don't have a PC-3000 or any proper recovery tool. Want to make a 'recovery for poor people' video? :)

@hddrecoveryservices 3 года назад

I can hook something like that up :) hit us up on the contact form on our website. Cover shipping cost and I will see what we can do. Would be a cool video for sure

@LuisFreites 3 года назад

Hi friend ! .. since I started watching your videos, I've been very curious to try to do something similar. Could you give me some advice on how to start, or what are the minimum equipment necessary to start? (I don't have a lot of money - just really want to). Don't be scared, I'm far away (in Argentina) so I won't be your competition ...: =). //. You do not give courses even if they are basic to start? .. and of course they are "on-line" for what we know is happening with the pandemic. Well thank you very much. Any comment or advice is welcome. Greetings

@hddrecoveryservices 3 года назад

Sorry buddy. I don't have time to teach this stuff. I run a very busy shop, so even posting videos here becomes a challenge with little time that I have. If we do training, it has to be in person and it is very expensive (to make it worth the time it will take me away from the real job)

@sodhibattva Год назад

I'm trying to do exactly what you did in this video but with a crucial ssd and I cant for the life of me get the nand flash off of the patient ssd. I've tried a range of hot air temperatures and air speeds as well as with and without flux. It seems like the chips have sunk down during my efforts so that makes me think the flux cant even get under the chip anymore. Do you have any tips? Thanks alot.

@hddrecoveryservices Год назад

Preheater can help. Don't heat NAND with more than 385

@sodhibattva Год назад

@@hddrecoveryservices I'll look into a preheater, thanks for the tips!

@Franky4795 3 года назад

I've got an PNY 128gb SSD it shows only 20 mb ((

@hddrecoveryservices 3 года назад

NAND is not found by controller, and it drops to safe mode

@alexpaige1490 3 года назад

Bravo

@janetwong4748 3 года назад

if I need business cooperation, how can I contact you?

@hddrecoveryservices 3 года назад

www.hddrecovery.ca/contact-us

@alcapony2012 3 года назад

Hi, How do you know wich one chip you should mark as first, second etc?

@ickipoo 3 года назад

The ordering only needs to have meaning to him - it's just so that he puts them back in the same place they came off. I believe he had some notes he was referring to, where he likely recorded the placement.

@hddrecoveryservices 3 года назад

Exactly marking in this case is only for my own reference

@alcapony2012 3 года назад

@@hddrecoveryservices thank you

@alcapony2012 3 года назад

@@ickipoo thank you

@atulff4579 3 года назад

Can I recover videos on my android phone, which I deleted like 2 months ago.

@hddrecoveryservices 3 года назад

I don't know

@sighpocket5 3 года назад

Nice!!!!

@GetGood5 3 года назад

awesome :)

@lalukadraka775 3 года назад

Where is your gloves?

@PIKACHU-zn8fx 3 года назад

🤭

@BlackAmnesy 3 года назад

That's magic, nice work big tanks ! P.S. Hate the haters :)

@hddrecoveryservices 3 года назад

Thanks Florin

@mateiliviu6995 2 года назад

I just saw your video and I am really impressed as I found myself in the situation with an Kingston SSD 120Gb ssdNOW200v, how stop working ... can you help me to recover the files?... 60-70Gb family photos and videos... thank you in advance

@hddrecoveryservices 2 года назад

Matei, you can contact here www.hddrecovery.ca/contact-us

@playmangostingiu2217 3 года назад

Just for curiosity, when you seat back the chip how are you sure of its position, I mean how are you sure to match the contacts since they are under the chip and not visible ?

@74656trekkie 3 года назад

The chips don‘t need to be aligned perfectly, the surface tension of the solder will move them into the perfect position once the solder is melted.

@playmangostingiu2217 3 года назад

@@74656trekkie Thank you for your reply..

@yashsheth7886 3 года назад

Why do u need easy jtag ?..plz let me know of u r doing mobile data recovery

@yashsheth7886 3 года назад

I see on ur screen thats why i m asking👍

@yashsheth7886 3 года назад

And also i remember ur using 861dw by quick ...but in this video ur air gun is changed to ...m i right?

@hddrecoveryservices 3 года назад

In some odd cases we use EZJTG for some projects. Our lab had 861DW blow a fan recently, so I gave my old Quick to the shop. I got JBC now.

@yashsheth7886 3 года назад

@@hddrecoveryservices thnq for replying😀👍

@tinylv16 3 года назад

Time to find some Lead paste for my lab, for science.

@hddrecoveryservices 3 года назад

This paste is surprisingly lead free

@shamimfatima2524 3 года назад

Hey erkin plzzz reply I am great fan of ur work and amazing stuff.. u are genius .. I watch ur videos very curiously... so just out of curiosity want to know that if micro sd memory card is cut down using scissors into multiple pieces so the nand embedded inside will also get divided along with those multiple pieces therefore the data will also get divided into several pieces? is it true? Because I had heard from someone that a small piece of it has still some data which was earlier stored in that region even after cutting the sd card and u can recover from them .So is it possible to get data from that one piece or by combining multiple pieces and using any method ? .. is there any technology or any method ? So can somebody still recover those data from those small pieces? Hope u will reply soon...

@hddrecoveryservices 3 года назад

There is no chance to recover it

@shamimfatima2524 3 года назад

@@hddrecoveryservices thanks erkin and one more question:- Not even a little bit of some data can be extracted from a single piece( which has a minor portion of nand memory chip embedded in) out of those multiple pieces of micro sd memory card??? Hope u will reply again....

@hasanmanzak200 3 года назад

"Sistem Ayrıldı" Hmm A Turkish patient.. :)

@hddrecoveryservices 3 года назад

must be :)

@jamesrios520 3 года назад

I need help with this SAS Hitachi ultrastar hard drive. It beeps once when plugged in, but doesn't spin. I'm not sure if this is a diode with the s marking code. Here is a pic link... ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-jH0GtQeJQhA.html

@rosariodagosto6484 6 месяцев назад

Usb stabiliser who makes this .😊

@hddrecoveryservices 6 месяцев назад

Rosario, it's made by Deepspar in Canada

@rosariodagosto6484 6 месяцев назад

@@hddrecoveryservices ok thanks very much

@davodamirajam1276 3 года назад

sandisk nand lose data by heat . 2 years ago one come to me it is flash drive 32 gb smi 3267 ab + 45 4c 98 92 tlc 8k 2ce 3267 is broked after very care fuly change pcb after install to new pcb device need to format with anyfound data recovery i found 20 gb jpg and mkv format sandisk nand is very untrustable also in emmc phone 70% sandisk emmc is gone

@hddrecoveryservices 3 года назад

3267 is a good controller to simulate. Did a few last week. All with great results. READOUT took some time, but tools and tech with RR today is much better then 2 years ago.

@pcvitamins 3 года назад

jbc baby :D

@hddrecoveryservices 3 года назад

You know it ;)

@storage2531 3 года назад

Master share u knowledge to me No problem If me pay

@lolnjeoglondajmejejplejlis3365 3 года назад

You don't need flux to unsolder bga and to unsoldering in general , its pointless

@lolnjeoglondajmejejplejlis3365 3 года назад

Wait what size balls for reballing you have used

@hddrecoveryservices 3 года назад

It's a preference thing.

@user-xh9bc7sd6j Год назад

Help out who has firmware for suntrsi s660st 120G ssd on sm2246xt controller and memory mt29f512g08cmcbbh7-6c by date code nw621

@FJsRus 5 месяцев назад

I sent North bridge fix your link so he can send you his work. He is an idiot.

@hddrecoveryservices 5 месяцев назад

@DavidColex 3 года назад

Can you give me an email address or some form of contact? I want to send you an sd card for data recovery. Thanks

@hddrecoveryservices 3 года назад

The link is in description box. But here it is again www.hddrecovery.ca/contact-us

@effectiveark 3 года назад

2nd

@marceljauch3989 3 года назад

SSDs aus Deutschland

@ACEDTVL 3 года назад

I need your help let's collab man if you can save my video , I will shout out your channel in the videos

@hddrecoveryservices 3 года назад

Hey, shoot the details to our intake form: www.hddrecovery.ca/contact-us

@user-yk1cw8im4h 3 года назад

Why do people even watch your videos, not much point to learn these stuff for most people

@petergplus6667 3 года назад

I watch it cause it is satisfying to see stuff being repaired and to gain the knowledge what can be repaired and what not. Certainly not gonna try that myself.

@playmangostingiu2217 3 года назад

You are right , but at least he gives us an idea of the recovery process and a possible solution for trivial cases, of course a professional cannot be replace by watching some video on youtube.

@awilliams1701 3 года назад

I love watching these. It's soothing. I love electronics and repairs. I watch a ton of retro repairs. I even fixed a 35 year old Commodore 64 myself with the help of videos like this one. The only thing wrong with it was 1 memory chip, but after I verified it fixed the machine, I replaced all 8 of them since the original brand that was installed is a known bad brand in the retro community.

@hddrecoveryservices 3 года назад

a lot of ppl watch it because they are trying to find a way to get their data back as well. And if their problem can relate to the video they see, it is clear that they found someone who actually can help. Not everything on YT is repeatable and easy to replicate at home. The other day I watch the guy do paintless dent repair, but it does not mean I will go out and buy his tools to fix a dent on my card. I sure as hell would hire him to work on mine :)