SolidWorks RE Tutorial

Подписаться 337 тыс.

Просмотров 6 млн

50% 1

V6 Engine complete video sw-tc.net/#320 solidworks tutorial, repuloading the previous engine in one video tutorial, For other engines/ motors/: • Engines, Motors & Rotors
-This engine devided by parts here: • Project 10: V6 Engine
►SolidWorks Learning course (voice):► • SolidWorks Complete Le...
►SolidWorks Sheet Metal Lectures► • SolidWorks Sheet Metal...
►Our Playlists:► / sw-tcnet
►Our Website:►www.SW-TC.net
►Our channel :► / sw-tcnet
►Facebook:► / solidworks.tutorial.net
►Tutorials Engineer Channel: ► / @tutorialsengineer
►Engine1 Project :► • Project 10: V6 Engine
Here is a similar* engine *in inches" by Matt Lombard with thanks" www.amazon.com/Mastering-Soli...
►Engine 2 will be completed on:► • Engine 2 project
►For more SolidWorks Tutorials: ► • SolidWorks Practical T...
►CATIA Complete Learning:► • CATIA Complete Learni...
►Inventor Complete Learning:► • AutoDesk Inventor Comp...
►SolidWorks Surface Lectures: ► • SolidWorks Surface Tut...
►Solidworks Sketch Tutorials: ► • SolidWorks SKETCH Tuto...
►SolidWorks Beginner Tutorials: ► • SolidWorks Complete Le...
►SolidWorks Sheet Metal Lectures► • SolidWorks Sheet Metal...
►SolidWorks Weldment Lectures:► • Playlist
►Available Playlists:► / sw-tcnet
►Learn Engineering Playlists:► / @tutorialsengineer
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
All dimensions are in mm/g/s/ISO - Based on true dimensioning.
---------------------------------------------------------------------------------------------
Rating, commenting, subscribing and sharing are always appreciated!!
----------------------------------------------------------------------------------------------
The uploading of tutorials is based on an accumulated studied plan!
----------------------------------------------------------------------------------------------
New to SolidWorks?! Recommended to watch my earlier uploads.
----------------------------------------------------------------------------------------------
I will be thankful to you for replying whom are in need.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Hello & Welcome to SolidWorks Tutorial Channel
This channel is dealing with EVERYTHING about SolidWorks aims to make the viewer a professional SolidWorks user! & to be helpful !
This Channel beside Tutorials Engineer contain topics about:
- SolidWorks Beginners Tutorials
- SolidWorks Sketching
- SolidWorks Surface
- SolidWorks Weldments
- SolidWorks Assembly
- SolidWorks Drawing
- SolidWorks Sheet Metal
- SolidWorks Mold Design
- SolidWorks Simulation
- SolidWorks Motion
And MORE
►►►SUBSCRIBE ?!◄◄◄
-------------------------------------------------------------------------------------------
GO PROFIST ...BE SOLIDWORKIST ◄ suggested words!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
----------------------------------------------------------------------------------------
★------ ۞ ART ۞ ENGINEERING ۞ CREATIVITY ۞ ------★
----------------------------------------------------------------------------------------
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Warm Thanks to them who supported and subscribed our channel in our very early start... All are nice but you are special!!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Viewers can contribute translated titles, descriptions, and subtitles/CC (with different languages)
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
OTHERS:
TO BE FILLED
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
■ if you feel want to give something in back : the minimum : Rate, comment, subscribe & share!!

Опубликовано:

18 янв 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1 тыс.

@plinsavi 4 года назад

In the connecting rod part, you have to change the dimension of the bigger hole from 76.2 to 63.5. There is an editing cut in the video that doesn't show that he changed the dimension. In 4:23 you can kind of see that the new dimension is 63.5. Like this comment for people to see it.

@VAB1990 4 года назад

Yes i noticed it but after I got stuck where we do extruded cut on the sides at 6:40

@mandiesmith5483 4 года назад

plinsavi good job

@cecilkoranteng2014 4 года назад

Would it be possible to get a pdf of the parts with dimensions

@okgbp 4 года назад

which is correct though? The 76.2 seems like a corrected value.

@mateenlakhani621 3 года назад

@@okgbp but how do u do the extruded cut at 6:40 ?

@dice1456 5 лет назад

1. Piston 2:32 2. Crank Shaft 23:42 3. Engine Block 31:53 4. Rocker Arm 47:26 5. Cylinder Head 1:06:12 6. Exhaust Manifold 1:27:04 7. Air Filter 1:41:13 8. Cam Shaft 1:46:08 9. Valve 1:52:53 10. Rocker Spring 1:54:52 11. Belt Wheels 1:58:39 12. Intake Manifold 2:06:21 13. Front Cover 2:18:26 14. Oil Pan 2:26:24 15. Air Turbo 2:36:36 16. Valves Cover 2:49:00 17. C. Retainer 2:56:25 18. C. Bushings 2:59:10 Lower Block Assembly 3:01:13 Upper Block Assembly 3:07:07 Outside Stuff Assembly 3:18:44 Shaft & Belts connecting 3:27:24 Exhaust Hoses Assembly 2:34:55

@user-bo4sy2cq3d 4 года назад

Doğru videoyu nasıl bulurum?

@kevinleonsanchez7111 4 года назад

The rocker arm has a little bit of shortcut. He showed how its made, but upon assembly, it was a different object.

@sundarramanj1608 4 года назад

@@kevinleonsanchez7111 yes bro, I also see it

@thompsn_9934 4 года назад

@@kevinleonsanchez7111 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-EmlJ1akp8zQ.html

@kushagraroy5081 4 года назад

Contact me for V6 Engine drawing Email- kushagraroy1@protonmail.com

@BrozakJaslene 4 месяца назад

Bạn không chỉ làm tăng số lượng mà còn tạo ra sự tương tác chân thực và ý nghĩa. Điều này giúp nội dung của mình trở nên phong phú hơn

@HBrooks 4 года назад

damn fine job. cool to see advanced mates in action

@automatix09 3 года назад

even if there were a few problems it's possible to solve them. THANK YOU for your great work! Helps me a lot to lern new features for school (technical school). If you read that- have a nice day ;)

@martingaete8098 5 лет назад

Thank you very much, I really appreciate all the effort you put in your videos!

@jilbake 6 месяцев назад

Im just gonna say it. I wish I was that smart. I am a diagnostic consultant for a major automaker supporting dealerships nation wide and its not a job for a dummy, but when I see you do that, I feel like a complete box of rocks. That is awesome work

@XxTHELEGONxX 3 года назад

good job im getting closer to completing my engineering degree solid works is bad azz ! hell yea dude keep it up!

@romlef526 6 лет назад

Magnifique !!!! , la seule petite chose manquante sur ce moteur est une animation automatique !!!! résultat superbe !!!!!

@antoinealzieu3477 6 месяцев назад

salut ta pas eu de problème avec le culbuteur ? il a dessiné une pièce mais au moment de l'assemblage ce n'était pas le même

@MrWilli117 Месяц назад

j'ai eu le meme probleme figure toi @@antoinealzieu3477

@a.elmehni6954 3 года назад

I saw the video at 0.5 speed, so, almost seven hours of learning !!! Thank you

@mike2652 4 года назад

Very nicely illustrated and demonstrated.

@subashvelu6659 6 лет назад

This tutorial a gives different view about drawing thanks dude

@dudleyparkfmx336 2 года назад

Thanks, great video, appreciate the time you spent making the video. Had to laugh watching your computer almost dying at the end trying to animate the assembly. Good work my friend.

@abdilrazaqadam3433 4 года назад

all i can imagine is the feeling after executing this masterpiece work

@VARLIVE 4 года назад

Hi dear friend 👋 😊 Can you check my Motor AC design: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-lQLbkU0wxEk.html

@pipthewarrior3738 Год назад

He felt 10 fps of it

@user-hg8cf8ur6i 6 месяцев назад

great video i did it the first time and it worked thought i would need to get someone out to help me but you explained it well and it worked thank you

@fernandoleopoldokauling2405 5 месяцев назад

Um excelente projeto de engenharia - parabéns!!!🎉🎉🎉

@justamechanicalengineer5721 3 года назад

Inspired by your creativity I have also start a solidworks model designing channel. Keep up the good work

@crapcopter 2 года назад

Woke up to this on my phone at 3am. Not disappointed.

@veronicaveronicabuenolemos680 4 месяца назад

Foi tudo muito rápido, estão de parabéns pelo trabalho, fiquei impressionado.

@praveenkumar-kb4nj 2 года назад

Great.It would be very usefull if you provide technical details of each part and Specify their measures in a Pdf file.I would have loved to recreate this model for my assignment.

@shaikhshaad2887 4 года назад

Thanks for this nice tutorial for best practical in solid works. I may request you to made aircraft angine as soon possible.

@marciacarmocouto4952 4 месяца назад

Valeu muito pelo atendimento no feriado, salvou meu trabalho.

@shrivignesh883 4 года назад

Thanks sir for making this video I have done this fully I learned a lot

@ermdallauddinansari1948 3 года назад

I follow you sir and learn basic and advance knowledge sir

@user-zh6oe1te2m 3 года назад

其实用快捷工具栏比较好~鼠标笔试可以设置为8笔试的！用布局草图的形式自顶向下建模，效率会高很多，像楼主这种只适合已知规格的；零部件制作，如果碰见比较大的项目或是需要反复测试论证修改的项目，这种方法就捉襟见肘了，因为稍微一改动，装配关系就会有一大推的报错！！！个人意见，不要喷~ 欢迎交流！

@abaymitiku8320 5 лет назад

HELLO SIR AM GLAD TO SAY THANK YOU FOR YOUR TUTORIAL. ITS GREAT TUTORIAL.

@kirang4415 2 года назад

Good tutorial.Came great as expected. 😁

@txqi 6 лет назад

Great video. Would it be possible to give the technical details of each part? Specifically their measures? I would have loved to recreate this model for my university assignment (giving you credit for its design), but my teachers did not accept it, for a lack of proper technical details. Still, I did recreate some parts just for fun and practice and learned a lot! So thanks!

@Uu-vr3wr 8 месяцев назад

Did you find any

@MadafakaGejmer 4 года назад

Very nice tutorial. I've learned basics with it! Too bad parts don't match in the end and there are problems with overlapping geometry but overall, very good tutorial for learning basic in SolidWorks!

@stylianosgeorgiou3147 Год назад

bro what basics thats some expert level shit🤣

@femiosusa510 Год назад

@@stylianosgeorgiou3147 You'd be surprised what experts can do lol.

@shailajaks9132 5 лет назад

Thank you so much for this tutorial

@lorenzopellegrini4072 3 года назад

DONE ! Great tutorial, thank you.

@andariniandarini4468 4 года назад

Thank You I Just Love this Channel. I Need to learn Solidwork but difficult to find mentor then i find this

@kushagraroy5081 4 года назад

For more help ypu can contact me at kushagraroy1@protonmail.com

@huntergreer98 3 года назад

Solidprofessor is what my college cad course is using

@itshakchattopadhyay6014 Год назад

For anyone getting knitting errors for the turbo change the distance between the rectangles from 80.45 -> 80.95 and increase/decrease the number or sections to the maximum/ minimum. It works on the newest catia version that way

@paulmitzlaff6952 Год назад

Thanks for this. It just worked for me in Solidworks

@alessandroscovoli7122 Год назад

Bro but where he took the principal part of racket arm? Help draw a piece and in assembly help took another

@swelch4266 Год назад

Thank you so so much!

@matteomonti1454 Год назад

thanks

@filippoelmi7331 Год назад

❤

@crazy031089 3 года назад

For those off you not properly realizing: This is not a real engine. There are a large number of (small) mistakes and simplifications, wich mean this would never work. It is a good start however to use to explain how an engine works. But most importantly, this is a nice tutorial to show what is possible in solid works and how to do it. This also means that the exact dimensions don't matter at all.

@sahilrana4933 2 года назад

Really it's a Hardwork with patience Thank you very much ✨✨ 🙏

@Fluttydev 6 лет назад

You should upload the parts description with exact dimensions this will really help full for us, thanks

@kef1kef2kef3kef4kef5 4 года назад

@@kushagraroy5081 E-mailed u, still available?

@volkanuzey6932 4 года назад

@@kef1kef2kef3kef4kef5 can u take the drawing?

@ilgazuzumoglu7093 4 года назад

@@kushagraroy5081 i sent you email

@carlosenriquesalassoto7373 4 года назад

@@ilgazuzumoglu7093 Can you send them to me too?

@zephinsgeorge5910 4 года назад

@@kef1kef2kef3kef4kef5 hey did you get the drawings???

@Ghost-ro2oy 3 года назад

Hi there. Thank you for the video. It's excellent. I will post here some tips for you guys to do the full engine. Here some corrections : 1) When you start the PistonRod at 3:55, make sure the dimension of 76.2 is always changed to 63.5 (you'll notice that he corrected it at 4:21). Thanks to plinsavi for finding this correction. 2) Make sure that all sketches are constrained (completely black), specially when you copy some patterns. 3) At 47:25, a weird rocker arm is designed, which doesn't fit in the assembly. Stop there. The correct rocker arm is here : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-EmlJ1akp8zQ.html Then jump directly to 57:40 to start the next part 4) after finishing the IntakeManifold1 (2:17:56), you'll notice that it is not perfect, because of how the middle part is connected to the 3 boundaries. A solution would be to add an extra sketch. for this, follow these steps : a) Move the Boss-Extrude8 on the tree to the top, just under Plane2 b) On the extruded face, create a new sketch and convert the entities in order to have a copy of the initial sketch (make this one visible to be able to copy it) c) on the tree line, Move the new sketch and place just after the Boss-Extrude8 d) Modify the Boundary1, Boundary2 and Boundary3 by using the new sketch, instead of the old one. Follow exactly the same steps show on the video. e) The result is a clean connection between the middle part and the different boundaries. 5) About the 5/16 hole at 2:33:00 : I tried several times with the shown values but it didn't work. After some tests, the custom sizing should be approximately : Diameter of the primary hole: 1.5in Major hole diameter : 0.332in Depth : 0.235in 6) When designing the CrankShaft Bushing (2:59:37), change the dimension of 76.2mm to 63.5mm. Otherwise, the CrankShaft will not fit into it at 3:03:14. 7) After adding the hoses at 3:40:16, you'll notice that they don't fit with the Airturbos. I suggest to modify the exhaust of the airturbos to have an external diameter of 50.8mm.

@atakanpolat7707 3 года назад

Thank you !

@Ghost-ro2oy 3 года назад

@@atakanpolat7707 you're welcome. Anytime

@devanshujoshi8393 2 года назад

thank you so much for this effort i appreciate you my friend !! :)

@trihuynhngoc7415 2 года назад

many thanks !

@pratiksharma4002 2 года назад

Do u have all parts dimensions photos of pdf if yes then plz email me on sharmapratik727@gmail.com.

@bharaniraj3797 6 лет назад

Thanks for the complete session video

@heartsbeauty577 6 лет назад

Is all the dimensions in here are correct ? does it works for you? because some of the dimensions are FAKE(edited))

@nopelindoputraperkasa5869 3 месяца назад

SolidWorks RE Tutorial #320 : Car Engine complete video (2 turbo V6) - (advanced assembly)... Amazing Vidio 🇮🇩😍🙏👍

@anton.saikin9837 4 года назад

Good job!!! Where can i get or find sizes for parts?

@MrBhavikpandya 3 года назад

Hi SolidWorks Tutorial. Thanks for making such a great model for practicing. But I am surprised in the Exhaust Manifold section at 01:37:03. when we choose bose extrude of Sketch 1 (contour 1) it gave an error of thin feature! Why!! So we extruded it in opposite direction and then modified it in the desired direction. and bang! it worked! I am surprised how did it work! I would appreciate if anyone can explain why it happed and how it just worked when we modified it later? Thanks, Bhavik.

@microsoftsarker 5 месяцев назад

Thank you so much for making this video! It was extremely helpful!!!

@ashutoshdubey8117 10 месяцев назад

After countless failed attempts, this working version feels like a breath of fresh air.

@shammideepak5677 10 месяцев назад

Hello can you send me the file

@akshaybhapkar1626 3 года назад

Took me 6 days to complete the whole...There are some errors in the dimensions of components. But overall, I liked it. I learned a lot about different mates. ..Keep up the good work. You should've attached some animation as well.

@rajivshenoy897 3 года назад

Can you please let me know about the rocker arm dimensions in the video

@akshaybhapkar1626 3 года назад

@@rajivshenoy897 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-EmlJ1akp8zQ.html

@gregorylincoln4328 2 года назад

@@rajivshenoy897 eb b. Bf b b. F b fb. V g b. f v. B f f ff v v bfb. Efv b b f vv. V. G fe b b. G. E. V g gv f b g. F b vb b. V. g. V. Vebvfef fb bff. b fffb b. F fe b f b e b. B . E.bb .bfv. f. F.b. B.f.bb. B fbfb fbb. Bf bfb..b..bb b .b.b .b.v.bf.bf. eb...fb...b.b.f.bff fff.b.b.bb... b..bffe.b .vfb.f.bff fe .f. V. Fff b.f b. V f b. f fb.. .bb v . F.b. .b.v.f f.bf f bff ..f v f. f v vbfc.ffffv. .v f f ff ff. f fv. B v. F f bf. F . Bff b. B b.ff.bffb..fb.e fb.ff.b. v eefb.bff.b. q q q. Q q q qs qqq q qq. Qq q qq qqq. Q q. Q. Qq qqq q q. Qq qqq q. Q q. Qq q q q. Qaqqq qq Q qqQ q qq Q. QqQ. Q qqqq Qq qQ q qqqq. Q qq qqq. Q qqqq qqq. Qqq qq q. Qqq q qq. QQqqq Q q q q. QqqQq q qq qqq q Qq q qqq Q q Q q q q Q q q q q Q q. Q Q. Qq q qq q . Qq q q qqq qq q q q qq q Q Q qqq qq. Q. Q. Q. Qqq q q q qq qqq qqqq q qq Q q. Q qq q q. Q Q Q Q q q q Q q Q qqq qqqq Q q Q Qqqq qq Q Qqq qqqqQ q q qqq q. Qqqq q qq qQ q qq q qq q. Qq qqq Q Qqq qq q q q. Qqq Q. Q. Q Qq qqq. Q. Qq qqqqq Q qq qqq. QQ qq d Qqq q qq q q Q qq Q Q qq Q qqq Qq. Q q Q. Q Qq qq. Q qq q qqqq. Q q q Q q qqq qQ. Q q qqq qq Q qq Q q qqQ Qq. Q Q. qq qqq qq q q qqqq Q. Q Qqq q q q qqq qq. Q q. Qq q q qq qq q qq qqq qq. Q. Qqqqq q q qqq q q qqq q qqq

@gregorylincoln4328 2 года назад

@karthik.max4450 3 года назад

Finally finished it completely within 4 days...some dimensions are wrong in the video but still made it successfully

@mayanksinghal273 2 года назад

Hey! I am starting to work on this model, can you please tell the exact points of dimensions which needs correction. I will wait for your reply.

@Mjloverjr 10 месяцев назад

beatiful video im completely speechless god bless you

@JohnnyDee9000 6 месяцев назад

This is awesome! So excited!

@jorgeveracazarin8486 3 года назад

Hello! i am going to tell you how i fix the problem with the holes in the intake manifold .step1.- offset the 6 squares 6.35 (outside) before boundary base (i used lofted boss now). step 2.- convert intities that 6 offset squares. step 3.- hide the first 2 sketches and use the 2 sketches with only the offset squares. step3.- use lofted boss instead of boundary base with the offset squares (in star/end constraints put normal to profile in both) step4. Show again the first 2 sketches to extrude the squares as shown in the video (extruded complete without selecting contour) . step5.-in a new sketck convert into intities the 6 original squares and keep only this 2 sketches (hide the others) step6.- lofted cut and set both normal to profile. step 7.- continue with the rest. Hope this could help you and sorry if my english is not the best. like so everyone can see this

@jaredthebest47 3 года назад

Thats a great solution! here's the process I used: 1. Continue the tutorial as shown until you get to the extrusions 2. Extrude as shown but include the holes as well, make sure to turn off 'merge result' 3. Use the intersect tool and select all bodies, click 'intersect' 4. you can now select which intersections to delete. Select the insides of the manifold as needed. That's it! this way you can stick with the video tutorial most of the way.

@ThanhHa-sl6py 3 года назад

Brothers and sisters help me with, the size does not seem to be correct when assembling, what to do ???

@mosand58 Год назад

@@ThanhHa-sl6py Sketch on Plane 2: Change 123.83 to 143.83

@e.t5102 Год назад

Hi!Can you share the technical drawings of them if it's okay for you?I want to try on my own first. :)

@ghassanfaris8703 5 лет назад

Done ✔ , Thank you for this tutorial

@jackspicer455 3 года назад

Whoa!This is Masterpiece.

@sulphurgamerz8488 2 года назад

I love this video 🎥 😗

@omkarkalaskar3823 4 года назад

Iam facing problem while assembling intake manifold. I think the part while doing assembly operation is different in dimensions then you showed in your video. Please help to resolve this problem..

@dimitrihamelin1060 3 года назад

Thank you so much for this video !

@brandonbowen3197 5 месяцев назад

God damn ❤️fabulous ,I Love you Blessings from Miami, Florida

@luchkovalentin 3 года назад

Done ✔ thank for tutorial

@quantumshadow4218 5 лет назад

this what i need great video and channel!!! im an engineering student and im gonna buy parts for my new cad computer but im searching about professional gpu and cpu you can give me some advice or at least tell your hardware configuration? im gonna work in a full turbofan airplane for my thesis

@300ml_brasil 5 лет назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-G-90qEJAVkU.html

@3Diest 2 года назад

Solidworks is amazing software, but you should also Checkout my playlist in Fusion 360.

@loicbarre6349 2 года назад

I paused the video at 3:32:45, because it shows two things I don't understand. First I see the PartR11 floating. Secondly, it looks like the CamShaft Retainer is coming out of the Valves cover. Also, with a bigger project like this it is easier to number your parts. I like to use the reference numbers as following; 1.1.1-A-[Part name]. First number is referring to the project number (or main assembly). Second number is for sub-assembly. Third number for part number. Letter for revision references ("A" being "REV0" and "B" being a revision of "A", and so on). This will not only help finding your parts faster. It also orders them and you can still search them by name. This really comes in handy whenever you add all the bolts etc. to your project folders as well. Other than that very inspiring video!

@trumanleonardi 3 года назад

Was alt tabbed and thought my spotify was playing cause the synth playing in the beginning of the video is a banger.

@perdiumdutt440 3 года назад

same happened to me....

@ahmedabdalluh7974 2 года назад

he used adesign from another thing and here is the link for the rocker arm ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-EmlJ1akp8zQ.html

@kize32 5 лет назад

First time I see an intake feed turbo

@melekdeniz8173 3 года назад

We did the process while drawing the rocket arm, but another part was used in the assembly part, so I couldn't do the rocket arm assembly, now it will affect the main assembly

@danveysey2223 3 года назад

This should be the rocker main body you need to assemble the whole rocker arm.ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-EmlJ1akp8zQ.html&ab_channel=SolidWorksTutorial%E2%98%BA

@Norman_Peterson 5 лет назад

amazing work!

@lancehu 6 месяцев назад

nice video! i would make one myself someday when i got the time. for the moment, i'm thinking about buying another fnatr enclosure for my neptune 4. i already got two for my ender 3 s1 and a1 mini and they work great.

@corymohill-smith4380 4 года назад

Great video, but sad about the camshaft gears ending up floating.

@ashishkumar74969 3 года назад

Learn AutoCAD Sketches, Drawings, Double Bearing Assembly , Engine Assembly, Fixtures Assembly, Wheelrim profile , and other Cad Softwares in very easy way #ASTALKS Subscribe to our channel for learning CAD(AutoCAD, Solidworks,Creo, Catia, Revit Architecture, 3D Max, Staadpro, Ansys), Computer( All Course's), English, Music, Tution, NTT.

@oz5750 3 года назад

@@ashishkumar74969 ,., ,,,

@aliqawqazeh7199 3 года назад

can you give me the specifications on drawing of all parts like pdf file ???

@tooldesigntech3819 2 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-FfVVIktM6rM.html* SUBSCRBE FOR MORE DETAIL

@patmebg3794 2 года назад

Wonderful video. Need more detail. Thanks

@cristiankilon1706 10 месяцев назад

I just adore your videos

@PUNISHERMARKO 6 лет назад

next video W16 from bugatti veyron :) took me forever to do it myself. Learning from mistakes :)

@PUNISHERMARKO 6 лет назад

? I have already done W16 engine

@pateljay1665 5 лет назад

Upload w16 tutorial

@Mr.Rajput_Vishal 2 года назад

From where we can get details for this drawing for practice

@edgardhernandez3568 4 года назад

Me costo mucho trabajo , pero muchas gracias por enseñar.

@ardiansalihu2036 5 лет назад

Nice done.Gratulate.

@xuancuongbui764 4 года назад

47:26 The "Rocker arm" part is different from the previous assembly.

@giorgioforcella2609 4 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-EmlJ1akp8zQ.html here you can find the rocker arm used

@yzl6284 3 года назад

@@giorgioforcella2609 so the one in another playlist is the one he is using ?

@giorgioforcella2609 3 года назад

@@yzl6284 Exactly

@kathirvelmuruganandam7214 3 года назад

@@giorgioforcella2609 Thank you Brother.

@Vanguyen09 2 года назад

Xuan Cuong Bui. Did you built and post this engine? Very good job. Thank you. I learn a lot overall from this video. Especially on (boundary boss, loft, sweep, and mating on cam, mirror copy or rotate on cam shaft). I have 2021 version, but I can figure out to match you version of mating in solidworks. There is a little problem on (intaker manifold, I did mirror and copy, but the mirror part only matching one side of cylinder head, the other side was off air vents). Can you let me know what's wrong? Thank you.

@antonioxavierdcosta5610 3 года назад

Turbocharger works with the help of exhaust gases...... The turbocharger in the video doesn't seem to work with exhaust gases...

@shreyashghare6838 2 года назад

Very Good efforts taken.

@yogeshtupe274 3 года назад

okay the video is great but I had a hard time mating rocker arm and cams. I was able to apply cam mates to few rocker arms but always failed to mate all of them so I had to change the cylinder head design a bit to mount the cam shaft directly on the valves, that eliminated rocker arm completely giving perfect cam mate with the valve springs directly. Also dude if you had only talked a little in the video would have been much appreciated, just watching you video for hours was painstaking. Also when designing the spring i gave external references to the assembly so that they get compressed by the cams instead of just crashing back and forth in the cylinder head.

@cadcaetutorial2039 7 месяцев назад

Very nice this lecture sir

@johnjames1994 6 лет назад

can i use the rocker arm in the play list for this assembly?

@kushagraroy5081 4 года назад

Contact me for V6 Engine drawing Email- kushagraroy1@protonmail.com

@cadmech4740 4 года назад

@@kushagraroy5081 can you send me the drawing on shanespinwarne0@gmail.com

@santhoshs4509 3 года назад

@@kushagraroy5081 can you please send me the drawing or rocker arm related information to santhoshsanthosh710@gmail.com Thanks in advance

@mayanksinghal6794 3 года назад

Hey kushagra, can you please send the rocker arm part design via mail mayanksinghal6768@gmail.com , Thankyou.

@loganikapi4399 2 года назад

Thank you sir for this tutorial. I was able to follow it without any issues.

@cevdetuslu5031 4 года назад

kardesm guzel yapmissin aferm tebrik etdim

@ronicksamuel2912 4 года назад

the 4 tutorial "Rocker Arm" is not complete/correct, please i need the complete/correct video on rocker Arm. thanks

@GigaChad-hf4yo 4 года назад

here check this ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-EmlJ1akp8zQ.html

@jorgeluisquiroz2356 4 года назад

@@GigaChad-hf4yo Muchas gracias

@user-de2pg3xv3r 3 года назад

@@GigaChad-hf4yo 감사합니다!

@amityadav-dz3uw 2 года назад

Qqqqqqsq1qqssqaqaaqqqq wwqstwq

@galadler34 5 лет назад

What are the outer sizes of the complete engine? Or how can I see or measure the sizes?

@kushagraroy5081 4 года назад

Contact me for V6 Engine drawing Email- kushagraroy1@protonmail.com

@kaidenwhaley7646 3 года назад

@ColdPetRat2.99 hey man I know it’s been a long time but what are the dimensions of the outer engine?

@WalterJSouza-yl8pf 4 месяца назад

Excelente explicação.

@gaitrivietnam 4 месяца назад

Happy new year 2024, I wish your family and you good health and success, I like your video, it's really great

@nirajsirvi4780 4 года назад

Big problem with rocker arm u make different and in assembly it comes as different part how

@bahaazidan9218 4 года назад

I had the same problem

@agastinjebaraj5111 3 года назад

Same problem

@yincheolhong6735 3 года назад

You can found that at this link. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-EmlJ1akp8zQ.html

@numandalaslan6360 3 года назад

how did you fix this?

@onurcanmucuk3287 3 года назад

@@yincheolhong6735 Thanks Dude

@venkateshbiradar2697 4 года назад

Plzzz, upload part drawings with dimensions

@arthurclaeys7100 2 года назад

Very nice project to do on your own, I learned to use a lot of new features I didn't know before. There were some faults in the intake manifold: some open spaces and it didn't fit on both sides of the cilinderheads. I was able to draw an entire new intakemanifold on my own without these open spaces, and it fitted perfectly on the cilinderheads, which shows that I really am feeling confident with these features. Also, on both sides of the valvescovers, there were camshaftretainers intersecting with the valvescovers, that was an easy fix :)). The hoses didn't fit on the turbos, so I had to change the diameter of the turbo outlet. The gearratio between crank and camshaft was switched too. I also drew a complete exhaust system that fitted on the existing exhaustmanifolds. I Would recomend this for anyone who is interested in how a combustion engine works and if you want to improve your solidworks skilss.

@user-uo5jk6kw6c 2 года назад

Can you guide how to make the correct exaust manifold?

@arthurclaeys7100 2 года назад

@@user-uo5jk6kw6c you mean intake manifold? Nothing wrong wigh the exhaust manifold?

@user-uo5jk6kw6c 2 года назад

@@arthurclaeys7100 Yes, intake manifold. Did you faced any problem in that? In comments I see that many people are complaining about that part. Have you got that part correct?

@arthurclaeys7100 2 года назад

@@user-uo5jk6kw6c yes I had some trouble with it, its a bit hard to explain how i fixed it. I can send it to you if you want...

@user-uo5jk6kw6c 2 года назад

@@arthurclaeys7100 yes please, it would really mean a lot. Other than this part, I have done others. So can we connect through mail or Whatsapp anything you want

@ashishkumar74969 3 года назад

Great Video sir.. i have learned also.

@lahirudasanayake9550 6 лет назад

please upload detail drawings of the each parts

@seanhammond3443 4 года назад

56:09 what are the specs of the tapped hole because i dont get that lip on top of the cut

@Madmate9161 4 года назад

I have the same problem, how did you fix it

@ahmedmaher4667 3 года назад

@@Madmate9161 Be sure that you are normal on the surface before you tap, because the surface you are trying to tap on it is inclined to the plane

@temitayoalabi2616 2 года назад

Thanks for this

@hulakazham120 4 года назад

Very cool work ! 👌

@vasudevan3195 4 года назад

Rocker arm 4 first part 1 is not drowned for assembly. Different parts of part1 in assembly and drawing. Simply "Rocker arm part 1 is missing" Check it please. U drowned a part in @57:23 and but in assembly u used different part @1:01:30

@kevinleonsanchez7111 4 года назад

Yes, I also saw it. It was a different kind of rocket arm which he made than the one in assembly.

@kevinleonsanchez7111 4 года назад

I think this is the rocker arm ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-EmlJ1akp8zQ.html

@bejaouirached8419 4 года назад

@@kevinleonsanchez7111 thank you Kevin that's the part i need it.save me a lot of time

@sushantgharde1834 4 года назад

Sir plz provide dimensions pdf for all parts..

@kaosantiorks 5 лет назад

Genial tutorial, buen trabajo!!!

@300ml_brasil 5 лет назад

did you see it? its shit.

@angeloazzarano2002 6 лет назад

Fantastic video! Just a question: the engine displacement is 9648 cm ^ 3?

@Flickerflops 7 месяцев назад

Fillet Lover😆😂👍🏾

@vasudeokatdare6530 4 года назад

DEAR SIR, IS THERE ANY MISS MATCH IN ROCKER ARM PART DRAWING? CAUSE,SHOWN IN TUTORIAL & SELECTED FOR ASSEMBLY IS NOT MATCH WITH EACH OTHER. PLEASE GUIDE ME.