Solidworks tutorial | sketch mouse in Solidworks (Advanced Surfacing)

Подписаться 589 тыс.

Просмотров 400 тыс.

50% 1

in this tutorial video i will sketch mouse in Solidworks with the help Advanced Surfacing tools.
Please subscribe our channel for more videos and projects in Solidworks. Please Like and share Our videos.
Thanks for Watching.
AMAZON INDIA
3Dconnexion 3DX-700028 SpaceNavigator 3D Mouse
amzn.to/2xGprwt
3Dconnexion 3DX-700043 SpaceMouse Wireless
amzn.to/2iSTC07
SpaceNavigator Notebooks USBF/ NOTEBOOKS USB
amzn.to/2wyoCpE
Hermitshell Travel EVA Protective Case Carrying Pouch Cover Bag for 3Dconnexion SpaceNavigator 3D Mouse 3DX-700028 3DX-70034 3DX-70043 Colour: Black
amzn.to/2gBRlWI
Mivi Thunder Beats Wireless Bluetooth Earphones with Stereo Sound and handsfree mic (Gun Metal)
amzn.to/2xH5V3c
TeckNet Pro 2.4G Wireless Mouse,Nano Receiver,6 Buttons,24 Month Battery Life,2400 DPI
amzn.to/2eyVIAW
SOLIDWORKS BOOKS
AMAZON INDIA
Solidworks 2016: A Power Guide for Beginners and Intermediate Users
amzn.to/2x2mJo9
Solidworks 2017: A Power Guide for Beginners and Intermediate Users
amzn.to/2eRLdpr
SOLIDWORKS 2016 BASIC TOOLS
amzn.to/2evb5Hc
SOLIDWORKS 2017 Reference Guide
amzn.to/2wxHvJm
SOLIDWORKS 2016 Reference Guide
amzn.to/2wy6Mmq
Solidworks Simulation 2017 Black Book (Colored)
amzn.to/2iS2oeV
Solidworks Simulation 2017 Black Book
amzn.to/2xGVIUs
SOLIDWORKS Simulation 2016: A Tutorial Approach
amzn.to/2gzQi9E
An Introduction to SOLIDWORKS Flow Simulation 2016
amzn.to/2guzsW6
An Introduction to SOLIDWORKS Flow Simulation 2017
amzn.to/2euX8cj
1)Solidworks tutorial for Beginners.
• SolidWorks Tutorial Fo...
2)Solidworks tutorial : Assembly
• Solidworks tutorial: A...
3)Solidworks tutorial vertical Stirling Engine
• SolidWorks Tutorial Ve...
4)Solidworks tutorial Forklift
• forklift Project in So...
5)Solidworks tutorial for beginners in Hindi
• SolidWorks Tutorial in...
6)Solidworks tutorial : Assembly in Hindi
• Solidworks tutorial in...
7)Solidworks Projects
• SolidWorks tutorial
like Facebook pages for drawings.
/ cadcamtutorial
/ cadcamtutorial

Опубликовано:

11 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 169

@simontillema5599 6 лет назад

Amazing. I built it, editted it a little bit, 3D-printed it, added electronics from an old broken mouse, and now your design is functional. Well done!

@claramelb7476 5 лет назад

That is amazing man!

@VishalSharma-oe9xg 4 года назад

Bhai which company r u working in

@ubeyde_krc 4 года назад

YES

@rogerioeduardo2874 Год назад

Hello! I'm in Brazil and I drew the mouse here, it took me a while but it turned out good, it was a good lesson! Thanks for sharing your knowledge!

@abueno6335 3 года назад

Thank you for your good intentions and very clear instructions. Please review your work and notice that you are overly complicating this task. First, by the (extreme) overuse of fully defined splines which can be achieved by making boundaries using Projected Curves instead and also efficient using Add Loft Section to a surface. Within your method, you could copy existing sketches and redefine these instead of doing everything from scratch again. You can create a single top surface and project your curves to create cuts and split curves rather than managing so many individual surfaces that you later have to knit... All of which will save much time, reduce complexity and unlock more power from the available tools. Good work overall in showing explicit controls on the splines.

@x1mjp1x Год назад

Agreed. This was WAY too many steps. I see there is a theme of OVER-defining in these video tutorials as well.

@phoneindustrydesign 5 месяцев назад

first off all this is my tutorial and these guys have just copied my work second, every single surface in this tutorial has to be built in this way in order to achieve precise look, if you want to only model a mouse without achieving great and price look like on the original product you can do whatever you like but the way I did is right

@davidrichards4591 4 года назад

Thanks for the video! It has been helpful as I am learning the advanced surfacing tools. FYI, the sketch relations "Coincident" and "Pierce" are different yet you used them interchangeably, and you often say to use one relation while using the other.

@bpetnoi1472 4 года назад

OK I have been doing regular SolidWorks drawings for nearly 3 years. I just watched 56 minutes of this man drawing a very well done mouse. After 3 minutes I was totally lost. It was as though he was using a totally different program. Not sure I will ever get this surface concept down in any manner which makes sense.

@x1mjp1x Год назад

@30.00 it would be helpful to hear why those settings under Boundary Surface are being selected and how they impact the results. At the moment, these seems like a very long way around to making this mouse.

@sherathiyaraj9258 3 года назад

When my mouse is almost done. I have trimmed main sketch instead of converted entity and after doing couple of Undoing and redoing I got meshed up and now I'm on the starting phase of mouse 😅 but TUTORIAL IS GREAT I MUST SAY ♥️

@bdcarlitosway 7 лет назад

Thank you for your tutorials!!! You are a saint, I am learning so much.

@CADCAMTUTORIALBYMAHTABALAM 7 лет назад

welcome, please share our videos thanks,

@dhananjayroy 6 лет назад

Awesome tutorial. I did get stuck at one point but did go through after a bit of brain storming. Keep it up you are doing a good job.

@jerryogen3426 4 месяца назад

Very Brilliant CAD specialist. If only you could in detail explain your steps. It would make the tutorials far better

@Indonesia01ian 3 года назад

Hi, I am new in surfacing what happens if we don't do the extrude in 6:15? what is the difference if we click the bottom and the upper part then use the line as a guide rail? thanks

@shyamkumarpatro9754 4 года назад

Thank you sir... Thank you very much... You don't know... But i have learnt a lot from your videos.... Thank you again

@abdalkaderalnazer 7 лет назад

thank you man we need more tips and tricks about surfacing thanxxx

@CADCAMTUTORIALBYMAHTABALAM 7 лет назад

Thanks.

@nicolascg8053 4 месяца назад

Extraordinary work!!

@TNPTVconnect 2 месяца назад

Excellent tutorial! Thank you!

@ronakadesara120 5 лет назад

Sir hum kisi bhi assembly ko resize kar sakte he? Yani ki all dimensions change kar sakte he ?

@TheMisleduser 6 лет назад

Thank you sir. Awesome instructions

@miteshgandhi480 3 года назад

i dont understand when making boundary surface which edges to select for direction 1 and which for direction 2

@บัญญวัตวงค์ปินะ 4 месяца назад

สอบถามหน่อยครับ เราสามารถ ย้ายงานไปไว้ที่ แกน x0 y0 z0 ได้มั้ยครับ ถ้าเซฟจากไฟล์สเต็ปมาน่ะครับ

@nitida 4 года назад

Thank you again! I think you could do a intersection curve At 7:20

@siddharthupadhyay4246 3 года назад

Amazing lessons sir!! Thank you so much.

@MuttakiNL 7 лет назад

I get error when thickening the knitted surface at the top of the mouse. I drew all of it twice from the beginning but got the same error. I think the problem is about the surface at the corner but I coulnd't find a way to fix it. It allows me to thicken 0.10mm but not 0.50mm as you did in the video. I would really appreciate your help for me to understand the problem.And thanks a lot for the video.

@ananyajain5837 5 лет назад

Hey, I am facing the same issue

@GeoXJimmi 2 года назад

Having the same issue here...

@ganeshvaranletchumanan133 Год назад

Yea facing the same issue here. Please do reply if anyone has found a solution. Thanks !

@ctcians10 4 года назад

Thank you for your tuts, i'm learning so much.

@TheENDAmac 7 лет назад

Hi thanks , how do you get the reflection hdri o surface in sketching mode ? .. thanks for great tutorial

@CADCAMTUTORIALBYMAHTABALAM 7 лет назад

Thanks, you need professional graphics card in your system like Nvidia Quadro series or AMD firpro Series. other cards will not support real views.

@ctcians10 4 года назад

If graphic card not supported, just add it in Registry Key. Type REGEDIT in Search Program and Files box LOCATE UR GRAPHIC CARD NAME AND MODEL 1. HKEY_CURRENT_USER\Software\Solidworks\SOLIDWORKS2016\Performance\Graphics\Hardware\Current - on the right pane double click RENDERER (copy the video card's name} sample : AMD Radeon HD 8470D Adding Graphic Card to Gl2Shaders 2. HKEY_CURRENT_USER\Software\Solidworks\SOLIDWORKS2016\Performance\Graphics\Hardware\Gl2Shaders\ (locate your graphics card in the list if available or add it under OTHER folder Right click Other+New+Key and rename the folder of the name of your Vcard Right Click your Vcard Folder name+New+DWORD 32bit value and enter this value 40008 or 40408 or 30408 or 60408 or 60008 (for me 60008 is working) 3. Restart solidworks app (if not work, repeat process and change the value. Also try to put it in the correct Graphic card folder (for me I put it under R420 folder because it's a RADEON VCARD

@Movieman1965 3 года назад

Now people can see why mice cost a lot of money! Hahaha! It's a lot of work to surface model a mouse! Great tutorial.

@tiagolopes7802 4 года назад

I have a challenge for you... can you model the mouse logitech anywhere 2s? Please, make a tutorial.

@vineethganji2496 3 года назад

where do you get these dimensions from or blueprints?

@HearsH96 3 года назад

Searching for same here

@evgenianarizh7233 4 года назад

Absolutely great job! Thank you very much! I learned a lot fron this interesting tutorial.

@josebordes8829 7 лет назад

Thanks for this very interesting tutorial. Do you thing this piece can be done without surfacing tools? I mean, with these complex curves, could I do this mouse as a solid or it would be too difficult?

@CADCAMTUTORIALBYMAHTABALAM 7 лет назад

if you will go for solid modelling , difficult to create such type of curves, up & downs,

@josebordes8829 7 лет назад

You are right, thanks! Keep doing such a good tutorias ;)

@phoneindustrydesign 7 лет назад

thanks Jose, it's actually a complete copy of tutorial I did. I am glad you like it! :)

@eoinstevenson5340 7 лет назад

nice?!?!?!?!?!

@tarikr5853 8 месяцев назад

Brilliant! thank you very much

@kandasamyrajan 7 лет назад

Please explain what is meant by 105. Time 1.28 Clear explanation is much appreciated because I am unable to move beyond this point. It is said that it is handle length of the spline. What bearing it has with a defining of a spline.

@markmackenzie7069 6 лет назад

Rajan Kandasamy I

@ajayantuvan8199 2 года назад

Are all these dimensions calculated or assumed

@ranjeetahardi6669 5 лет назад

Very thank full to you sir ...U r simply awesome.. thanks for the tutorial.

@ciaranaitken6520 7 лет назад

jeeeeeeeeee wiz thats one goooooood vid, gud job maaaaaaaaan

@wenweigan8043 7 лет назад

Helloo, do u have the design for separate parts for assembly ? And do u have any ideas to design the jig or fixture for your mouse? Thanks

@CADCAMTUTORIALBYMAHTABALAM 7 лет назад

this is created with the help of surfacing tools in Solidworks & its a single par only.

@jonathona4032 6 лет назад

Every time I try to tangent the 2 splines I get a Over Defined error :c

@ngangoumlove 6 лет назад

thanks Sir, but please how can i get some shiny image by modeling like yours??

@trinh4784 2 года назад

1:36 Dimensions of spline : 130, 105, 115. what is this? Plz clear it for me?

@ilustradsn 3 года назад

Is there a easier way to start ? ( not with spline) thank you

@Aman-wy6sj 4 года назад

Sir could you tell me, how you are giving exact specific dimensions like exact angles, lengths etc. I mean how to consider what extent of dimension is most suitable..

@VishalSharma-oe9xg 4 года назад

Cmm bro . A machine for accurate measurement

@Sabertooth93 3 года назад

When i choose normal to profile (as mentioned in the video @36:22), it gives me an error? Any solutions ?

@jededmonds7624 3 года назад

Thanks - very helpful tutoial

@FadDog-dy9kc 3 месяца назад

Keep going ❤

@origami_canoe1952 3 года назад

Thank you! This was very educating

@arsenbassenov1290 6 лет назад

Thank you very much! However, for some reason my trim surface is always greyed out. What should I do?

@HearsH96 3 года назад

Ensure you have converted the sketch entities, maybe that’ll help

@adhishpv6315 4 года назад

I am getting an unwanted, irregular hole, when I try to thicken surface can u help me

@joonykids 5 лет назад

Simply Awesome!

@amorimtexas 7 лет назад

excelent job! thanks and congratulations!

@CADCAMTUTORIALBYMAHTABALAM 7 лет назад

Thanks,

@mathewlong9531 7 лет назад

thnx bb

@amorimtexas 7 лет назад

Congratulations! I would like to work as a freelancer ..... at home .... is it possible?

@CADCAMTUTORIALBYMAHTABALAM 7 лет назад

try with freelancing websites & fiverr, even you can sell your 3D models in turbosquid.com

@madhusudhanar1137 6 лет назад

I can't able to make vertical in the beginning of spline

@PUNISHERMARKO 7 лет назад

Awesome. Very nice :)

@CADCAMTUTORIALBYMAHTABALAM 7 лет назад

Thanks.

@因特-o7h Год назад

can someone tell me why does he keep the extra boundary surface hiding and does not delete these at last?

@joseluisgomezruyter2108 4 года назад

Hi how did you get that shiny look at component level?

@indulahemachandra5717 Год назад

RealView graphics - search how to enable realview graphics in Solidworks

@jakubdemolay1336 7 лет назад

Sir, I don't have those manouvreable arrows by the spline...Can you help me, please?

@jamescuevas7080 5 лет назад

Tools - Options - System Options - Check "Enable spline tangency and curvature handles"

@disfuncionexe 2 года назад

I am making a mouse body for my solid works final. thanks for the tutorial on how to make the curved faces

@subratadutta7710 3 года назад

Sir, where do you get those dimensions? Btw the video is amazing

@grovkillen1 3 года назад

He's making them up. I don't know why he's obsessed with using fractions of a millimeter though, it just makes it harder to follow. And I find it very easy to break the model using so many dimensions connected to the origio. Use relative dimensions instead makes it more dynamic.

@AkashChavan-lu8kr 3 года назад

Sir pls provide drawings of these project.

@danielmulhare5741 7 лет назад

nice man

@danielmulhare5741 7 лет назад

tnx 4 comment likes guys

@uniqueperspective7156 5 лет назад

Great work sir, thank you

@PauloSergioDiasCarmo 4 года назад

Hello friend, where do I find the channel's CAM videos?

@HearsH96 3 года назад

Click on the channel thumbnail and it’ll take to the home page page of the channel. You can all their playlists and videos there, including videos on CAM

@vadikvvadikson111 4 года назад

thank you very much for your lesson

@akashvyas7715 7 лет назад

sir,can you make some more tutorials on surfacing. thankyou

@CADCAMTUTORIALBYMAHTABALAM 7 лет назад

sure i will do more surfacing tutorials.

@zaiddoor6721 4 года назад

Good

@santiagorodriguezgarcia6803 6 лет назад

the "Thicken" tool is not in my solidworks, what can I do ?????? please

@muiscabacata 7 лет назад

is it possible to make an explosion?

@CADCAMTUTORIALBYMAHTABALAM 7 лет назад

sala.mandre we made many videos on Exploded view, check our channel.

@patrickmcgowan8380 6 лет назад

What mouse was this tutorial based off of?

@facetious1728 6 лет назад

based on your name my guess is that you're also on that LC DCG cram

@VADIMAKE 4 года назад

i don't get why you make 2 peaces of that surface on the side at 35 min , why not 1 peace?

@cityblue7029 4 года назад

at 4.50 why can't I select anything to remove? pls help

@resultalo6915 3 года назад

thank you very much

@lukefitzsimons9473 2 года назад

Is this a logitech m235

@nileshmishra5517 4 года назад

Can you make a sandals...!!!

@akhilanand6546 3 года назад

how do i clear the error for selecting the guide curve ???

@parthagaming4164 Год назад

Wow

@trinh4784 2 года назад

25:21 I can'i choose the midle edge in the direction 2. Oh my God.

@dcrdcrnkl1 7 лет назад

Thanks for the tutorial

@CADCAMTUTORIALBYMAHTABALAM 7 лет назад

welcome, i hope enjoyed,

@phoneindustrydesign 7 лет назад

thanks Dan, if you check out my channel you will see this is a complete copy of tutorial that I did. you're welcome :)

@MrFjho 3 года назад

Thank you bro!

@MultiMertkan 7 лет назад

excellent.

@CADCAMTUTORIALBYMAHTABALAM 7 лет назад

Thanks,

@phoneindustrydesign 7 лет назад

thanks man, these guys copied my videos so wanted to let everyone know I am original creator :)

@luisbolanos954 5 лет назад

Great work thanks :)

@ubeyde_krc 4 года назад

you are perfect

@jaymistry5504 5 лет назад

Why is your solid body so clear??

@md.nahidsarker5111 3 года назад

Excelent tutorial but difficult to me.

@ctcians10 4 года назад

Please help, give me sample how to create Eggtray (material-pulp)

@scottymadden99 6 лет назад

What mouse is this

@mmaad2165 4 года назад

anyone here know how to find the steps he did to make anything else??? this is the real tutorial

@soumadipsasmlsasmal1304 6 лет назад

Dear sir, Solidcam tutorial ke bare me kuch details digie Hindi version me ek alag si folder create karke; please sir, please sir, please sir. Details explain solidcam in hindi version create new folder. Please sir, Please sir, Please sir, please, please, please.

@ubeyde_krc 4 года назад

I subscribe to your channel.

@malkalbt6416 7 лет назад

The question is how you got the dimensions ?

@phoneindustrydesign 7 лет назад

the answer is - he copied my tutorial and the way I got the dimensions is by measuring the mouse I have and also following some base dimensions shown on the official Logitech website :)