Is the zoom lens on your Nikon 200-500 f/5.6 sticking or stuck? If so then here is the fix & it only takes a few minutes with no major strip down of the lens. Keep watching to find out more !
Thanks for the video. You helped me enormously. I had two screws that had completely come out! A bit of shaking (and not a small amount of cursing) and they both appeared. Nikon wanted £720 to repair it. Thanks again, I'm very happy once more. 🥳
@Swisztony my pleasure, you could buy a good used 200-500 for £750 so Nikon need to look at their repair pricing. Or, perhaps they'd rather not repair it and that's why they charge a fortune, who knows?
Based on the issue I was having with my Nikkor 200-500mm lens and your instructions on your video I was able to repair the lens in about 5 minutes. Yep, the silver headed screw was the issue. It was a simple fix. Thank you so much for your video.
This video saved me time and money! I experienced the same issue as that described in the video. However, I could not tighten the offending screw. Fortunately, it wasn't necessary to completely remove the zoom ring. If you are able to rotate the zoom ring to expose the three screws holding the ring in place you can remove the screws and the white plastic "washers". Then you can push in the zoom until the offending screw is completely exposed and can be easily tightened.
Thank you so much for making and uploading this video. I began having difficulty with the zoom on my 200-500mm today. I found your video and and I was able to repair my lens within 5 minutes. As you stated, the silver headed screw is the culprit. The biggest difficulty that I had was try to get the screw accessible while manipulating the lens. The screws didn't make themselves easily accessible, but I was able to get the screwdriver on the head enough to turn it. Turning smoothly again thanks to your video. Cheers!
You are very welcome, I'm glad that you have resolved the issue. This fix won't work in all cases but if it helps a small number of people then it was worth posting. Thanks for the comment, very much appreciated.
@@wildlifesnapper1 I suppose that's how they are able to sell them at a reasonable price. This amount of reach, especially on a crop sensor D500 is really beyond what amateur photographers have ever had access to.
@dobbsgraphica4988 this is true and when you consider the cost of a 500 f/4 the 200-500 becomes a no brainer. I have a Nikon 600 f/4 but it plays second fiddle to my 200-500.
Wow, thank you.. I was having same problem, now it's a quick fix thanks to you. No more sticky / stuck zoom. My lens is now zooming perfectly like a new one.. thank you so much, you saved me a lot of money by posting this great informative video... cheers.👍
I have had my 200-500 for about two years now without any issues, until today when I finished a session and could not close the zoom down below about 250mm. I immediately found that it was stuck in that position. I had read on various forums that this was a known issue and that it had something to do with an internal screw coming loose but hoped I would never have to deal with it. Thankfully I found your video and felt confident enough to attempt a repair. I folded back the rubber grip then removed the tape and metal strips. This exposed the three “windows” however with the lens stuck at 250mm none of the offending screws are visible. I had to get pretty physical with the lens in order to get it to move at all. Eventually it became free and I was able to move it all the way out to 500. I found the position where the screws were visible, but testing with a screwdriver they all seemed as tight as I could get them. I took a risk and closed the lens down to 200 and to my horror found it was stuck again. ! Using force, I managed to get it to zoom out. I decided my only option at this point was to put everything back how it was and tape something near the top end of the barrel to prevent me closing it past 250mm. So that is what I have done.
I have the complete strip down instructions if you would like them, there is another issue which can make the barrel stick but you would need to strip the lens further to find the offending screw. I have sent these instructions to many people now and all have managed to resolve the issue?
Wow, thanks for responding so quickly. I would be very interested in seeing them. I would read through , then decide if I had the tools/ skill to go further :-) do you need an email address or do you just have a link ? thanks in advance . Martin. @@wildlifesnapper1
Yes! Everything was exactly as you described, and it took me just a few minutes to roll back the grip, locate the offending screw - which, as you pointed out, had become more visible against the black by rubbing its paint off against the housing, and tighten it with a precision screwdriver. Much less involved by a whole order of effort than what I was anticipating when the lens got stuck
This video was a Godsend. A very easy explanation to the problem and the solution. In my case the I had 2 screws that needed to be tightened down AND access was not as easy which required loosening the zoom barrel shroud. With the instructions that 'wildlife snapper 1' emailed me, it was a 5 minute operation. I got access to the screws, tightened them, put it all back to together and I am good to go.
Ah mate, you have saved me several hundred pounds in repair costs, maybe more as I was contemplating just buying a new one! I wish I had seen this earlier because when it happened to me in April, I was away on the Isle of Mull. Luckily it happened the day before I was due home. In my case, it stuck at the full zoom length. Unfortunately for me, I've scratched the lens barrel as I forcibly pushed it down when I got home. When I followed your instructions, it was Indeed the screw but it had completely come free and was jammed between the two casings. I had to remove the three screws and the little plastic washers, but didnt have to remove the shroud. Again luckily for me with a bit of wiggling about, the screw showed itself and I was able to retrieve it! Brilliant! Works like new again, I'm so grateful. What I also would say is while you are at it, check the other screws because in my case the other two were also loose! Many Thanks.
So glad you found my video and that it helped you resolve your issue. Nikon should never have farmed out their lens manufacturing to Malaysia and China as in my opinion this is the root cause of the problem. I have a 600mm f/4 made in Japan as pro lenses are still manufactured there and although a very similar build it has no issues and I doubt there will be any........watch this space!! Thanks again and happy snapping.
Thank you so much! It would have been a long while before I could have sent this to be serviced, but your video completely solved the issue of why this zoom lens was sticking between 400 - 500. Had been out taking bird photos and thought I had somehow trapped dirt in the shroud, but it was the exact screw you mentioned grinding away. I very much appreciate you sharing this information, thank you! 😁 Best wishes from Australia! (In my case it was the screw AND the little rubber washer under the screw that was twisted and sticking out)
Many thanks for the comments, I am glad that you managed to resolve the issue after watching the video. That's what its all about, take care and happy snapping.
Thank you, thank you THANK YOU! My Nikon 200-500 started becoming 'sticky' after a few uses and at one point I started to feel something grinding while zooming in/out. I immediately stopped using it and tried to figure out what was going on. In the process of examining/attempting to find the problem, my lens got stuck at 200mm. It was so stuck I was too afraid to force it out so it sat unused for a few weeks while I reached out to Nikon to see if the warranty would cover the repair. After working through the red tape I realized it was going to cost me a lot more to ship it out for repair while taking the risk of them not being able to fix it, or worse the warranty wouldn't cover the damage. I decided to start digging through RU-vid for a solution and stumbled across this video. After contacting the wildlife snapper I got the detailed instructions and was able to fix the issue! I literally can NOT BELIEVE Nikon has made such a small faulty part. I own so many of their lenses and I have NEVER seen something as dumb as this. Literally, it was one teeny tiny screw coming loose and the whole lens was rendered practically useless. Thank god for this video! Your help was invaluable! Thanks again!
You are very welcome, I'm pleased that my short video gave you a fix. Sadly, Nikon now have many lenses made in China/Korea and this lens is one of them, cheap assembly at reduced costs is always going to cause problems and the 200-500 has suffered more than most. Good luck and let's hope you get many years out of your now functioning lens.
Thank you so much for this tip, My lens stuck today and I did exactly what you showed in this video and now my lens is fixed. Very tricky to find that one screw but I did it. Thank you so much for sharing and saving me so much money. Sheri Whetham
This just happened to me, and now I know how to fix it myself!!!! THANK YOU SO MUCH, MATE! I have fixed my 80-200 f2.8D myself also from the focus ring slipping in manual (common issue on that lens) so I'm very happy to be able to get this done myself and save at least $200! Cheers from Michigan!
Yes, I had the 80-200 and remembering to switch over before using the focus ring was a pain. Glad this fix has helped and regards from Warwickshire in England.
@@wildlifesnapper1 ugh... unfortunately I spoke too soon as the screws were all tight, and it's still stuck (roughly won't go looser than 380mm or so). Any other tips?? Much appreciated!
@@wildlifesnapper1 Oddly enough I never forget to switch the ring to A or Manual on the 80-200. It's just the cheap plastic rivet they use that broke! Nikon needs to stop using cheap parts in that spot!
@@trypersistence Yes, I have instructions on how to strip down the lens, it is usually a screw that's loose or completely dislodged however. I will send you the 2 pages that I have. My email address is wildlifesnapper1@virginmedia.com Drop me an email and I will forward the dismantle pages to you.
Good help... although it didn't quite sort my problem but it did give me the courage to take it apart and find the precise issue. In my case, two screws came loose and were freely rattling around inside so I slid forward the plastic sleeve where the sticky tape is on, to find three screw holes, two of mine were empty and the plastic was severely scraped from the previously jammed screws. I managed to get the two missing screws put them back and tightened and all is well. A 200-500mm now, when it was a 480-500mm for many years. Thanks once again. 🙂
Thanks for the kind words. You can force the lens, if the screw has dropped out then the zoom shroud is plastic and the screw tends to scratch the inner shroud and not the outer barrel so any marks are not visible. It's up to you if you want to try that though but if you want the strip down instructions I'm happy to send them?
I bought this lens on June 2022 and by August i had this same issue. I'm about to send it to the service center here in Greece since the warranty is still valid. Although, i'm sure i could easily do this on my own instead of getting in the trouble of packaging it, sending it for repair and then wait a couple of days for them to return it... Anyways, thanks for the video, it's very clear what you have to do if you have this problem! Cheers!
I had this problem but it was the screw that is underneath the the plastic sleeve (the sleeve is the plastic ring with the holes in it from the nikon metal covers and tape that you removed from the sleeve), not the screws shown here that you can reach without moving the sleeve forward. In order to get to them you have to slide the sleeve forward. Mine was glued and wouldn't move, but I found the suggestion to use a heat gun to warm up the glue that holds the sleeve and that worked for me, and sure enough then the loose screw was obvious! Tightened them all up just in case and put it all back together and it works great. I had to use the heat gun again when moving the sleeve back to it's original position or there was about a 1/16"/2mm gap which probably wouldn't be a big deal but by heating the glue I was able to work the sleeve back to it's correct position. Took quite a bit of pushing and heating but I got it. See ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-MOPWRWoh2CA.html for a demonstration of the sleeve being moved forward, but he makes it look like it just easily slides forward. Mine didn't. Had to use heat gun! Good Luck
Brilliant, many thanks for this. My one packed up yesterday when on a job. It had been making a grinding noise for a while, and assumed it was dirt. My one fully locked at about 250mm, but with gentle taps, and some gentle force managed to get it unlocked to the point in your video. I got a bit of paper in to dislodge any dirt, but then saw one of the three screws was raised. It's not fully visible, but just enough to get it turned back into place. Turning nice and smooth now and no change to image quality etc. I'm very much obliged to you!
Thank you! That worked for me. My only challenge was the screw was partly covered so I did my best to tighten it with a small flathead. Seems to work….hopefully it holds. Great video and thanks again!
This happened to both mine and my boyfriends lenses. Your video worked great for my lens thanks!! My boyfriends Is in worse shape so may have to remove the other piece. His whole screw is missing.
Thank you, I was lucky as the screw had not fallen out completely which can be an issue. I have the complete strip down and repair guide for this issue though should any of your friends need it
Does it only work if your lens is stuck at 500mm? One friend has her camera stuck at 250mm and can’t see the screws at that zoom. She said it has to be at 500mm. Or, perhaps she has a larger issue. Thnx.
Thank you so much, for this brilliant video. It was exactly as you described.....id put up with the sticking, for months, until it finally jammed up last weekend. It was, as you said a few minute repair......easy when you know how!..... thankyou again.
Thank you for your video, my lens has seized at 250mm. I rang a few companies who on average wanted £700 and I even drove to Stoke on Trent from Bedworth to get a quote. I rang my insurance company today and if I dont get any joy from my insurance company I will try your solution
@@wildlifesnapper1 thank you for your reply. I did roll the rubber back to expose the tape, but I dont want to touch anything till I get a reply from my insurance. If I have to try myself can I get back to you again ?
@@davidbird4006 yes of course although the video is the extent of my knowledge but I do have the strip down procedure if you need to remove the zoom collar completely.
Brilliant thanks for doing this video mine have locked up twice but got repaired under warranty but now my warranty has run out I'm not worried about it now cheers 👍🏻
@@wildlifesnapper1 I will keep you posted its a month out of warranty it locked on 200mm last week but I managed to free it but the lock won't lock the lens but nikon said I got to pay for the repair so now in dispute.
Thank You so much. I have this problem en thought tis is the end. I saw your video en think I can do this. And yes, exactly what youn told. 1000 thnxxx
Thanks for this. I have this lens and although I don’t use it very often I’ve been worried about the legendary lock up. Now, should it happen I’ll be prepared.
Very helpful video for people with this problem. I too use the Nikon D500 with the Nikon 200-500. I don't have the sticking zoom problem ( hope that's not tempting fate!) but recently my VR has stopped working. Have you heard of problems with the VR on this lens by any chance. As far as I know I haven't accidentally mucked up any settings it just seems to have stopped working. Any thoughts would be appreciated.
Thanks for posting. Regarding your VR issue, I have not heard of this being an issue before. My initial thought would be to look at the switch on the lens, I'd spray some electrical contact cleaner under the slide on the switch and then operate it on and off a few times as it may be dust or grit on the contact. There is very little that can fail on circuit board so I'd opt for a simple fix and try that for now. Failing that I have strip down instructions for the lens but personally I'd seek professional help if it still won't operate as stripping down the lens will most likely not reveal the cause of the problem. As a caveat also clean the contacts on the lens and camera body just to ensure they are all clean. Isopropyl alcohol and a cotton bud is ideal
@@wildlifesnapper1 Very much appreciate your help, I'll try these ideas out and fingers crossed. Best wishes and good luck with your next wildlife trip. Even with the best of preparation we all know a good slice of luck always helps!
I'm pleased that you are up and running again, it's a pity that Nikon have handed manufacture of this type of lens over to the Chinese as, sadly they are not as well manufactured as those pro lenses that still come out of Japan
@mjtphotography be careful though, they are all, and I mean all, using China as a cheaper manufacturing base. Especially for mid and none pro camera gear, camera's, lenses and video camera's.
Your screw has possibly come out completely, you can force the zoom as the shroud is plastic and although it will scratch it its not visible. I also have instructions for a complete strip down if you would prefer that route?
Great, thanks. But the problem is my zoom is stuck between about 400 and 500, so I therefore can't zoom back in enough to have access to the said fabled silver screw! I thought that yours was stuck out there too - how did you manage to get it back in enough in the first place?!
I forced my lens to the correct position, the screw if loose or out will scratch the inside of the shroud which is plastic and should not affect the barrel
this is great and I'm going to try it. But my lens seems completely frozen, so not sure how I can expose the screw heads by zooming in/out. I'm still going to try and let you know - thanks for the video
Your lens will move, you may have to force it but it will only scratch the plastic shroud inner and not the barrel, if you are lucky If the screw has completely come loose then it may scratch the barrel. If it's extremely stiff to zoom then I can email the complete strip down procedure, which, although not difficult, does require a degree of care. Let me know?
I have not got this lens yet but valuable to have advance info on such problems :) In fact I'm also concerned about this lens susceptibility to moisture ingress and thus condensation deposit internally. A well known 2nd hand kit supplier proposes approx 9/57 of this zoom model 'with light condensation' problem, and I am intrigued how to deal with this should it arise. Obviously, peeling back the rubber shroud would allow better airing and drying access. If anyone has more advice it would be gratefully recieved.
@treelee8485 Hi, thanks for the comment. In honesty I never had an issue with moisture when using the 200-500. I owned the lens for 8 years and it was used in all weather's but other than the screw issue I found the lens to be fantastic. I know of issues with some pro Nikon super telephotos that suffer from fungus but not the 200-500 which I highly recommend.
Can you detail how to remove the shroud over the front tube? Is it glued onto the focus tube? If so, do I need to pry it off? Unfortunately, I've been unable to zoom down my lens below 400mm. As such, I can't expose the lower screws, which appear to be the cause of my "stuck" lens. One note: with some gentle wiggling of the front tube, I was able to zoom up to 500mm, and the screws were all very tight. Should I try to continue wiggling the front tube with hopes it'll eventually give and zoom down to
If you have glue then your lens is an earlier model I'm afraid. I'm not sure how to release the shroud from the glue and you would have to search the Internet for a possible answer or simply risk trying to seperate the shroud from the lens to find where your problem lies?
@@wildlifesnapper1 Thank you! I found a few posts on forums that mention use of heat gun or hair dryer to weaken adhesive; but not much detail how much heat. I'm hesitant, since I don't want to "melt" or warp any components, especially plastic/rubber/wiring. (i.e heat gun)
@@wildlifesnapper1 , Last night I was able to remove the lens shroud by carefully and slowly heating over the narrow joint between the zoom ring and lens shroud with a heat gun (lowest setting). It wasn't "glued", it's just super tight and the heat made the rubber/plastic expand just enough to push and slide it off from the joint. I used rubberized work gloves to enhance the grip, then was able to slide the shroud forward. I saw that tiny screw that your video highlights, which was very tight and ok. However, the 3 screws that that secure the zoom ring to the lens tube were loose, actually one was missing and I could see "long scratches" over the plastic lens tube. I couldn't find it or hear it inside the lens. I believe it may have dropped off, while I was looking it over (carpet), so it's lost. After retightening the remaining 2 screws, the lens barrel and zoom function work as before. So, I'm happy that I got full function! :) Regardless, thank you for sharing your video and insight. It encouraged me to DIY for an "older", out of warranty lens. :)
@Dom J. Manalo that's great news, I'm so glad that you decided to bite the bullet and have resolved the issue. I wish you many hours of happy trouble free zooming. You know now that if the problem occurs again that you are more than capable of fixing it.
Fixed the zoom function on my nikon 200-500mm lens with help from a COIN COLLECTOR!!!! The screw had to removed from a plastic bushing and the reset. Be cautious, we lost two of those tiny plastic bushings. Those things were difficult to find. Once we had all three bushings and screws everything we great for repairing this lens.
Ok, this is not uncommon as there are other screws under the shroud. I have strip down instructions if you'd like them, simply contact me via my email address which is on RU-vid somewhere, I will forward them onto you?
Hi, I hope you're still looking at your comments. My 200-500 zoom lens is stuck at 200-250. When we pulled back the rubber and tape. I could see the three holes, but no screws. The shroud would not budge or maybe I would see the screws. I saw that your were emailing the additional information for removing the shroud. Would you be willing to send me that?
Hi there, yes sure, I'm away from home until Sunday so I will send them to you at some point next week. Drop me an email (my address is on the channel somewhere) I will reply and attach the strip down instructions.
@@elainemartin7141 no problem at all, I hope it helps, have you tried pushing down on the lens to move the zoom rather than using the zoom ring, it usually only scratches the plastic shroud on the underside if a screw has fallen out, this is not visible damage on the lens and may enable you to find the screw, usually only 1 that has fallen out?
Hello, I would like to ask about carrying the lens in a backpack: whether attached to the camera, or each one separately (so as not to damage the camera bayonet) - or does it not matter? Thank you and greetings Vlad
Hello, if you purchase a decent backpack such as a Lowepro, Tenba or Think-tank then the lens sits vertically with the camera mounted at the top, these bags also have a lens pad which attaches using velcro and prevents any heavy movement. I use a backpack for my Nikon 600mm f/4 and swear by it, not only does it protect the lens and camera but it also makes trekking easier as the weight of the equipment is distributed through the shoulders and your waist. These backpacks are expensive however but they are pricey for a reason and hold a good used value so if you sell it then you will recover a good amount of your investment. I hope this info helps you. Let me know if I can help further?
Your issue may still be resolved without a return, I have the strip down instructions if you would like them via email, just contact me via my youtube email.
You have to force the lens, it should move and will only scratch the inside of the shroud which is plastic anyway and not seen. Failing that you will need to strip the lens down and I have instructions for that.
Amazing, I also found this vedio accidentally... 1. What bag is best to carry D500 & 200-500? I don't want very big bag which give options to carry laptop and other things, it increases bag size unnecessary. I will like compact bag when I am going on Motor bike. 2. While using this camera I want to hanged it on neck or shoulder with strap, will it affect camera body because of it's weight? Holding with lens handle without strap is painful. I found you older vedios related to Strap after writing this message.
Thanks, I don't use a bag unless I'm shooting with my Nikon 600mm f/4. It depends, do you want to keep the lens attached to the camera when in the bag or are you going to split them. There are many bags out there and it really depends on what else you will be carrying in the bag as well.
@@peepingtube7 you will need a fairly large bag if you want to keep the camera attached to the lens. I'd look at the Lowepro range as they are rugged and cover many lens and body combinations.
I use the Blackrapid Sport. I regularly watch check to ensure that it is screwed up into the camera properly. I don't usually rely on it solely when using this lens. I have the tripod mount on top an carry it by the mount. The strap gives my the ability to take a respite without setting down the camera.
You should be able to force the zoom to locate the screw, any resistance should only scratch the plastic sleeve and not the lens barrel and this is not visible. If you are reluctant to do this then I can email the strip down guide to you which others have found helpful?
Do you have a white glue looking substance in the lens? When I did what you taught us, its like the glue looking substance might be causing my problem?
Hi Kathy, no, I do not but I have heard of this before and from what I have read, Nikon used some kind of adhesive on earlier lenses. That is however all I know
I have the complete strip down instructions in written form for complete removal of the inner shroud and it is held by tiny screws, there is no glue. If you can't zoom to expose the screw that is causing the problem then you would need to follow the complete strip down procedure as the screw has possibly detached and will now be trapped under the shroud. As I stated in the video, I was lucky as the screw had not fallen out. My fix is not going to help everybody but once again as I also said if helps one or 2 people then it was worth posting, and, I know it has already helped a handful. Thanks for the comment though.
I have a different issue we’re I have a rattling noise come from inside the lens. It almost sounds like there is a loose screw inside the lens. I’ve also be reading this could be related to VR. I’ve only just bought the lens from a good company second and am just wondering if anyone else has had this issue.
I’m looking for the screw so I don’t have to remove the part you said. But I’m not sure my lens goes back far enough. It’s stuck at 400m and I don’t see that screw.
If you have removed all of the Black headed screws (4) in total and your lens will still not zoom then you have another issue and will have to remove the shroud. I have instructions for a strip down but am away from my PC. I will forward them to you if you send me an email address.
@@wildlifesnapper1 I’m not sure it seems when I comment my email the comments get deleted. Is there a way to direct message on RU-vid? Or what’s your email and I will email you
I was very excited when I found this video, but as others have said, the screws on mine look and feel tight. However, I just wondered if anyone else found that the little covers on theirs only have electrical tape rather than that in the video?
Hi, electrical tape would suggest to me that your lens has been repaired before, did you buy it used? Sadly the repair doesn't always apply but I have strip down instructions if you need them?
@@wildlifesnapper1 Thanks, I got your email. The tape is the same as in this video, that was posted below ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-MOPWRWoh2CA.html
@Those Fingers yes, that tape looks very loose where it meets the dust covers, I'm not saying its not a Nikon tape but I would be willing to bet that it's not.
@@wildlifesnapper1 Hello again. I found the screw that was causing my lens to jam and it is was under the shroud that is glued on, so I had to use a hair dryer to loosen the sticky paste to access it. Now that I have tightened it, I can see that the offending screw is visible below the range I was jammed at, much the same as those in the higher range you mention, but was not accessible before. Now, I just have to remember which screws go where. Also, I seem to have caused some misalignment in those 'windows' which is a nuisance. Cheers.
My 200-500 finally stopped zooming altogether. It is fully in the 200 range and will not move at all, it started off sticking but now it wont move at all, Is this still the same issue? Nikon wont repair it as they said it is a grey market lens. I bought the lens from another photographer. Nikon is in the process of shipping the lens back to me now
This will be the problem but you may have suffered an extra issue because if the screw has fallen out (mine had not) then you will have to remove the zoom ring. Panic not though as I have instructions that you can follow to achieve this. Follow my video when you get the lens back, look closely and you will see if a screw is missing, if so it is trapped under the zoom collar and you will need to follow the printed instructions that I have in order to fix it. Drop me an email and I will send them to you.
@@carlearrye8473 well, I'd look at my fix first and foremost as this is the easiest thing to eliminate. If your zoom switch is stuck then you would need expert advice as although I have strip down instructions for the lens they do not include the switches.
Yes it will be and you have to force it to expose the issue. If it is a screw then it will only scratch the inside of the plastic shroud and not the zoom barrel. If you don't want to do that then I have complete instructions to dismantle the lens, the choice is yours to make?
5 people have disliked this video & I fail to see a reason for that to be completely honest. There is nothing to dislike and other than the fact that those who have chosen to dislike it are morons I have no answer!
@Unicorn Of Truth Sony don't make ultra long lenses so I fail to see the point of a smiley face. Nikon have no issues with smaller zooms or professional Nikon lenses which are still made in Japan. These 200-500 lenses are built in China now and this is where the problem starts sadly. Sony have great problems with lenses not communicating with the camera body so to be fair it's all relative and every owner will have issues regardless of manufacturer. Your comment infers Sony superiority but unfortunately that's just you looking at life through Sony tinted sunglasses.
@@wildlifesnapper1 lol, yes, agreed and Sony have enough issues of their own to keep them occupied, perhaps we should also be tiny minded and go & put smiley faces on some of their users videos 🙂 Proper smiley face look
@@wildlifesnapper1 My comment infers, it was probably Sony users clicking the thumbs down on your helpful Nikon video ... because lots of people have an over developed brand loyalty :) Nice fix tip thanks, hope i don't need it, but nice to know, just got this lens. Wonder if the Z version will address it.
@Unicorn Of Truth looks like I completely misunderstood your post then......oops, sorry. I'm not sure who disliked this video but it does beggar belief at times. Regarding Z lenses I would suggest that it boils down to where they were assembled, anything from China will be far less reliable than a lens made in Japan.
Thank you very much for your video! It is very clear. However, my lens is stuck at 200 mm and I cannot move it so I can see the screws. I see by looking at the comments, that you have a printed document explaining how to remove the shroud so I can get to the screws. How can I send you my email address privately so you could send me that document? I would really appreciate it! Thank you very much!
@@wildlifesnapper1 my daughter was able to get the lens extended out to 500mm. And I was able to use your printed document which you emailed to locate those other screws on the barrel. I did not have to remove the shroud. Thank you very much for all your help! My lens now works perfectly! And you save me a ton of money!
Thanks, yes, they all fail before too long but hopefully if you do something straight away then the screw won't have fallen out completely as that is a strip down job.