Solved USB Not Detected NodeMCU ESP8266- Drivers issue 

This was one of the few tutorials to show the entire process. Thank you!

Thank you so much, for the esp32 wroom 32e I was having trouble connecting it to arduino ide and by following this along with holding down the boot button while the arduino was connecting to the esp32 through the new port I was able to start working on my project through my personal laptop, thank you again!

I'am really thankful for this important video because I have prepared all steps even the Blynk app project but nothing goes because the computer didn't find the ESP8266 ! Thanks again

2 days. I have been looking for 2 days. Well, after work anyway. Thank you so much:)

Can you please share the driver folder link ? it is not available on the oem website

that solved my problem ... thank you very much!!

KEEP UP THE VIDEO'S, YOU SAVED MY LIFE WITH THIS ❤

This solve my problem with my ESP8266, thank you very much!!

Thank yo very much for this kind of information, please make video on home automation using alexa and Google.

You solved my problem, tank you, a life saving video... 😉😉

YOU SAFED MY DAY!!! THANK YOU SO MCH😊 really!

thank you, this was the fix I needed… installing the “CP210x_Windows_Drivers” for Windows 10.

Thank You So Much Sir..🥰

Worked for me! Another thing that you could of mentioned, some boards will only work if you click upload on arduino, then wait for the "connecting......" to show up on the console, then you must immediately hold the bottom right button until you see stuff being written to it (in the micro usb port facing down orientation).

Thankss a lottttttttttttttt mannnn , ive been scouring thru YT n finally this worked much love

It said when i clicked install that driver install failure what is the reason

thanks mate for the help

Thanks bro nice education

Thank you very much. It works for me. :)

thank you sir for your tutorials

Thank you so much for sharing 😊😊

Thank you!

Thanku so much sir 😎😎

Thank you

Look forward to more node mcu content.

Thanks bro it worked 👍❤❤❤

Thank you, this is the only tutorial that worked for me ❤😊

Thank you. My problem is solved.❤

Thank you so much 🎉🎉🎉🎉

Thanks a lot you're very help me!

I have installed all the drives but am not able to find the port after installation also ?..any suggestions

thank you it works

Worked for me, thanks 😊

hello sir in my case node mcu is blinking for 1-2 sec only. it is not detected by laptop at all in com port. I've installed all the drivers properly. looking for your help. Thank you

Helpful content

THANK YOU SO MUCH. u saved my life ong

THANKYOU MATE❤😊

Thank you so much

thank you bro

Can you write the code to load the esp 8266 circuit with the feature of getting the neighbor's wifi password?

You saved me! Thank you!

I have tried both types of ESP8266 on Win 11 and followed the above instructions to the letter but still cannot get them to work.

luv you! ty so much it finally worked

Thank you so much❤

Thanks ! It worked

a lot of thanks for the video

How to reset the nodemcu.. Because my coding "hard resetting via rts pin" and my arduino IDE has no button reset method?

Really thank you!!!!!!!!!!

it worked thank you!

Thanks a lot

i tried the same procedure but communication port com 3 still shows a yellow sign n in ardeuino, port option is still greyed out..any other solution?

Hello sir, I have same problem with stm32f103c6t6 bluepill board. can you make the video to fix the issue

duude u r a life saver

Thankyou very much

in my case its not even detecting when plugged in, any idea what I can try

Thanks

thankyou sir this was really helpfull

Thank you so much.

it is connected but i can't find ESP8266 Port and Libray in board or Library manager Some body help

thanks uncle muthu

Thank u 👽👌🏽

i already install it but it dont show anything on my device manager please help me fix it and i already plug it to my laptops port but when i look at the device manager nothing shows up

thank you very much man i love you

thank you!

I CANT FIND DOWNLOADED DRIVER IN PORT SECTION IN DEVICE MANAGER

Hey man i did everything shown in video and i did change cables 5 to 6 times the esp8266 is blinking then connect to laptop but its not being detected and when m uploading in it an error of saying smthing like error time out or no device connected(i.e esp) I tried the rst button too flash one too Even tried to upload the lower and stable version and also higher ones The error is same What problem is this do u have any solution?

i installed all the drivers you mentioned but it shows that the drivers are pre installed and still the esp is not being detected

Thanks a lot man

Thks man ❤

It's working thanks bro ❤

There is no other devices option in my laptop

i love you man

thank you

but sir there is no other devices or ports option in my device manger please tell sir what to do

Thank u

No matter what I do, it keeps telling me that it has failed to start. Can you please help? I am getting very desperate. I am on windows 10, I have installed and tried every cp210x driver. And also when I install the drivers, it does not automatically show up in the Device Manager. I have to press on "add legacy hardware" and then choose to manually add in the driver.

Great video, if there is any drivers that you are looking for we are ready to help.

I'm not getting the other devices option in the device manager

i have installed this but my node mcu esp 8266 modules blue light is not blinking, i mean it just flikered at the start when i connected it to my laptop but then the light was gone. but when i connected some other devices to it like an led light it gets switched on. pls help

i did everything but i see the port as obscrated and it doesn't detect anything i tried with 3 different esp32 and 3 different usb cables

I dont get the exclamation in device manager nor can the win 11 PC see the board com port. I can't connect to it. And yes I installed the CH341SER driver too 64 bit version . no joy.

Thankyou❤

When am clicking on board node mcu is not available?

My LED does not turn on at all with 1 of them, my other 1 works flawlessly not sure whats going on, would appreciate any help - its not the cable :(

My node MCU is not getting power or detecting on pc Vai USB but when attache battery it turns on and I can upload programs also but without battery it doesn't work what can i do please help

If I connect my Nodemcu to the port of my laptop using micro USB cable, it doesn't light the blue one. I don't know what is the problem

My laptop and desktop cant see it at all. I have downloaded drivers and still no difference. Pls help

Bro i tried but cant even see Ports in Device manager

i have installed the cp210x but that yellow sign is still there and i am faceing "A fatal esptool.py error occurred: Write timeout" error please help me to fix it

life saver bro

I need your help right now pls bro

my esp8266 device is not detected by laptop at all. nothing shown in device manager. any suggestions pls

Universal drivers are not useless, you need to right click on device in device manager and click update drivers and select that universal drivers folder so that it can pickup the drivers and install

Works

Port option is not there in device management any one say how to fix this

my windows 11 laptop still didn't detect any nodeMCU even after installing the drivers

Sir Mera node mcu me light ek hi baar blink Hota he ..kya issue ho sakta he? Or connection sahi se nai ho pata:

Bro even in the device manager also it was not showing like serial port

No1❤❤❤❤❤❤❤

Sir someone please help me out,🙏 i am new to this field, i took nodemcu first ,it was ch340 driver,i tried all possible drivers, the only thing that was coming is that there are no suitable drivers for device, then i took cp2102 nodemcu, again today i tried all possible drivers, still same error is coming,i have windows 11, installing windows 11 was the worst decision in my life,i tried going to advanced option to check if windows had its own driver, that told there are no drivers for this device, even though i give the location of driver it still comes no suitable driver found.i have to submit project in this is few days, any help is very appreciated.