Solvent Welding PVC For Swimming Pools

Подписаться 66 тыс.

Просмотров 1,2 тыс.

50% 1

From www.swimmingpoolsteve.com/pag... this video talks about WELD ON brand primer and solvent cement for connecting PVC plumbing systems for swimming pools and spas. Learn about the different products from WELD ON made for the pool and spa industry including pool cleaner, pool primer and solvent cements for a variety of different applications.
www.WeldOn.com is now a sponsor of the Swimming Pool Steve RU-vid channel and I am happy to endorse their products to anyone looking to solvent weld PVC for pressure rated pool and spa systems.
00:00 - Introduction to solvent welding PVC with Weld On products
00:40 - The importance of using primer when solvent welding
01:09 - No primer required for non pressure applications
01:40 - Pool plumbing is the worst thing to take a short cut
02:05 - 711 gray, 705 clear and 795 flex solvent cement
02:45 - what is heavy bodied solvent cement used for?
03:15 - Regular bodied solvent cement for up to 4" pipe
04:00 - When to use clear versus colored primer
05:00 - Leaks happen even when you are very careful!
06:10 - Common Weld On products used for pools and spas
07:00 - New products for pool systems from Weld On
07:20 - Pool Cleaner from Weld On
08:30 - New products from Weld On
09:15 - Deep dive into chemical makeup of each solvent cement
09:35 - MSDS sheets contain chemical composition info
10:15 - Swimming Pool Steve is NOT a chemist
10:40 - 4 chemicals commonly found in solvent cement
11:35 - MEK in solvent cement (and pipe schmear)
12:30 - Some solvent cements do not contain MEK (747, 795, 711)
13:00 - 725 Wet Or Dry contains 1% MEK
13:45 - 705 and 744 contains up to 25% MEK concentration
14:40 - Choosing the right PVC cement for every job
15:00 - Pool N Spa solvent cement sets up very quickly
16:00 - ABS to PVC transition cement
16:45 - Summary and endorsement for WELD ON!
17:50 - A poor Sean Connery impression!
#pvcpipe #poolplumbing #swimmingpoolsteve

Хобби

Опубликовано:

3 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 15

@jag4790 5 дней назад

Nothing better than weld on heavy gray glue. That and primer is what i use to glue pvc pipes.

@knemo77 22 дня назад

Really well done.

@gonzalomadero9848 21 день назад

Another great video, Steve

@Peter-Alexander 22 дня назад

Nothing wrong with old school 😊

@mhm925 19 дней назад

I also sand before the primer. call it over the top. takes no time and it’s done in all other professions with other materials.

@jag4790 5 дней назад

Dont forget theres a difference between set time and cure time. Ive repaired lots of blue glue pipes that have blown apart. When i do sprinkler repair and theres systems that are pushing 70-80 psi i use Gray heavy body blue and i wait till cure time 15-20 min before i turn the water on. Ive seen people use blue glue on 70psi systems and turn the water on 5 min later i just go and shake my head and say to myself i wouldnt want to be that guy when that blue glue blows apart 10-30 years down the road.

@hovansh2373 23 дня назад

Awesome video once again!

@mayorb3366 23 дня назад

As far as the application, there are connections where you can't see the other side of the pipe that you need to attach a fitting to. In those cases its best to not only swab the glue around the pipe, but on the blind side also run the swab up and down the pipe. This will help eliminate the possibility of leaving a bare spot where you can't see it. (I learned that the hard way many years ago!)

@robertmurphy8831 18 дней назад

Thanks!

@Swimmingpoolsteve 18 дней назад

Thank you!

@michaelnuzzo1475 23 дня назад

You threw me off. First time I’ve seen you standing up. Warn us next time!!

@Swimmingpoolsteve 23 дня назад

@@michaelnuzzo1475 ok...be warned. I am standing in a LOT of the upcoming videos!

@generessler6282 23 дня назад

Thanks Steve! I have only done a couple of plumbing projects on my own pool. One thing I ended up puzzled about was that for the Pentair check valves - which seem all to have CPVC bodies - they recommended Weld-on 724. I went ahead and used that even though it's a bit hard to find and not cheap. Yet I saw several forums with pool pros saying just use the usual PVC glue like 711 and it will be fine. What would you say?

@buzzpoluchi3217 18 дней назад

Steve, a few months ago I had to relocate the pool equipment to a new building. The primer I tried to use (O~~~) was as thin as water. Unusable. Ever heard of this?

@Swimmingpoolsteve 18 дней назад

@@buzzpoluchi3217 primer is as thin as water normally