Sony DVD Player Won't Spin or Read Disc Fixed. Model DVP-SR210P 

Me too!

To God be the glory! Thanks for watching!

@@becausestuffbreaks Amen! 😀

Thanks for watching!

Glad I could help. Thanks for watching!

My dvd player is old Sony it was In our backyard it is DVP-NS300

I love fixing stuff people throw away

@@becausestuffbreaks awesome 👌

@@becausestuffbreaks I took a magnavox dvd player apart and the dvd motor it doesn't have wires attached to it.

@@hopenavajo1391 soldered straight into the board or on a ribbon cable?

@@becausestuffbreaks so there is no OEM that can't be replaced to it

Thanks for watching!

Check cable and wire connections. Check if screw gear is turning. Might need lubricated.

Good evening. My Philips DVD is saying No disc to every disk I put inside. What can be done

@@ademolaoluwaseun8896 Clean off the laser lense with rubbing alcohol and a Q-tip and buff it dry with the other end. Let me know if that works

I have repaired PS3s

Yes, because it will spin backward if you get it wrong.

Yellow with black, orange with red.

Can you get WD40 onto it?

Soldering iron. Get it hot. Touch it to the top of the screw for a few seconds, then quickly try turning it.

Probably whatever motor driver supply chip they use.

@@becausestuffbreaks ru-vid.comxR3hyWzQ92I?feature=share

@@becausestuffbreaks ru-vid.comdLaiXBIS-Bc?feature=share

Try cleaning the laser lense with a Q-Tip and rubbing alcohol. Maybe it stops seeing the disc and that's why it shuts down and then kicks back on when you push down. Also unplug and then plug back in your cable bundles and ribbon cables. Let me know what you find.

@@becausestuffbreaks Thanks for getting back to me. It turns out it's the spur gear on the laser rack drive motor. The gear had split over time between two teeth, I assume due to the assembly press fit, and so meshes intermittently. Until I can find a replacement gear, if that's even possible, I loosened the motor screws and shimmed it to one side to allow a little mesh clearance where it was hanging up. Probably not ideal from a gear wear perspective, but seems to work for now. Pax Christi. 😉👍

Awesome! Thanks for the info

@@becausestuffbreaks I found this video of a fix for a split spur gear that was causing the same problem I had. I haven't been able to find a replacement gear, so may resort to attempting this as a more permanent solution than cocking the drive motor. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Kr16o8YMa5s.html

@@guitarman_3693 Thanks guitarman. At some point after my temporary fix, the player acted up again, and I found it was due to the spur gear sliding on the shaft to the point where it disengaged from the mating gear. I ended up boring the spur gear hole very slightly to where the crack didn't open when installed on its shaft, then applying a small amount of E6000 adhesive to the shaft plus a small blob on the end of the shaft to prevent sliding. I was then able to remove the shim under the motor and fully secure it by tightening the screws. Works fine now! Regarding your belt comment, I did find that useful on another player, a Technics SL-P101. The disc drawer on that unit was not opening properly due to stretch in the original belt. I ordered a new belt from Russell Industries and that fixed the problem. See a similar unit being repaired in ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Zas9uYmqb6g.html.

Probably the motor. Did you make sure all the cables and ribbon cables are seated in all the way?

Get all the life out of it that you can. Thanks for watching!

Eek. That's not good. The screws holding in the disc drive motor might be loose and causing the disc to drag on something inside. Either way, you'll have to take it apart and see what's scratching. Maybe there's foreign debris inside it.

Or maybe I’ve should have bought a new Sony blu ray dvd player because not knowing what the original owners did to it

@@linkmasters535 that too. Thanks for watching!

Here the part on Amazon: amzn.to/3GcPvnw

@@becausestuffbreaks Thank you!

Let me know if that works. Thanks for watching!

@@becausestuffbreaks have been boycotting Amazon for years now. Have replaced my 12 year old dvd player, hooked up yesterday. Appreciate your response. My Bose sound bar went up too. They sent me new cables, but no😢. The cheapie dvd player lasted longer than the very expensive sound bar. Also hooked up new t.v. Don’t need a sound bar. Sorry in advance to the landfill. Happy New Year!🎊

Good to look around for the source. Thanks for watching!

More likely carbon brushes from that motor. It was directly under the bottom side of the motor, right where the brushes are located. That piece of copper laying there?... is also part of the brushes.

I tested the motor and it works.

Sounds like a bad power supply or button. Have you tried the remote?

@@becausestuffbreaks the remote is lost unfortunately

If you have another Sony DVD player, the remote should work on this one also

@@becausestuffbreaks OK thanks

You'll probably have to take it apart

@@becausestuffbreaks that's what I'm trying to do

What kind of screwdriver do I need

I don't remember, but I assume it was a Phillips head

@@becausestuffbreaks ok

Thanks for watching!

Thanks for watching!

Your loss. Hope you change your mind about Christianity. You know where to come if you need some answers. Thanks for the view!

Or this was all part of his plan from the beginning. God wanted to make himself known to his creation. How can He show his unconditional love and forgiveness for His children without the fall? Or show His wrath and mercy without the fall? Sin and sinners suck, but they are supposed to suck. How would we know/experience that without the fall? We have the privilege to see and experience the attributes of God and I praise God for that. You should check out this video I made talking about a lot of this: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Y7IcXESiXcA.html

@@becausestuffbreaks we'll I'll tell you that if your god is so great he could have found a way for it to work WITHOUT torturing his own son ( what a terrible example for dad's everywhere) without murdering all those innocents during the flood (not everyone on the planet was wicked a 2 year old baby can't be wicked and how many people died because of the actions of others isn't that one of the things we detest most in our society is when somebody else pays the price for somebody else's faults) and he could have figured it out without banishing Satan here why would you taint your own special Creation with your own worst enemy and by the way who creates their own enemy anyway cuz if God can see the future and knows what's going to happen why would he allowed the archangel to go rogue on him anyway I can think of so much more to say so much more that is absolute nonsense in your belief like God telling Abraham go get your only son to sacrifice and then when he comes with his son god says oh i was just joking....yeah well thanks alot god, u prick.

I think morals for humans mostly were adopted from the Bible and if you don’t have morals, you shoot up school children, run over people at parades, plant bombs at parades, steal money from your constituents you’re supposed to be helping, cheat on your spouse, etc. Some people don’t have a moral compass and need an instruction manual, so to speak, to learn them. Some still don’t learn them and that’s what jails are for.