No video :(

Source Transformation

Подписаться 2,6 млн

Просмотров 315 тыс.

50% 1

Network Theory: Source Transformation
Topics discussed:
1) Thevenin-Norton Transformation or Source Transformation.
2) Transforming Voltage Source to Current Source.
3) Transforming Current Source to Voltage Source.
4) Thevenin's equivalent circuit to Norton's equivalent circuit.
5) Norton's equivalent circuit to Thevenin's equivalent circuit.
6) Why one should not do the calculation for the resistances involved in the transformation?
Follow Neso Academy on Instagram: @nesoacademy(bit.ly/2XP63OE)
Follow me on Instagram: @sujeetsingh20(bit.ly/2JLcQz5)
Contribute: www.nesoacademy...
Memberships: bit.ly/2U7YSPI
Books: www.nesoacademy...
Website ► www.nesoacademy...
Forum ► forum.nesoacad...
Facebook ► goo.gl/Nt0PmB
Twitter ► / nesoacademy
Music:
Axol x Alex Skrindo - You [NCS Release]
#NetworkTheoryByNeso #NetworkTheory #SourceTransformation

Опубликовано:

27 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 62

@nushaierhamza7969 2 года назад

Where would I be without you, Neso Academy?

@alexandermushibwe4745 2 года назад

On RU-vid looking for another channel

@debashishtiu2919 2 года назад

Kachre k dabbe me( jk)

@itsricky1745 2 года назад

😂😂

@shrutimukherjee8378 Год назад

In the same class

@aaryanporia Год назад

Paying attention in class

@1028_sheng Год назад

You are my midterm hero,Thank you!

@wormiestspoon9489 Год назад

this man is a life saver, I've got an assignment due tonight and id be doomed without this absolute legend.

@santoshpal8612 Год назад

U would had asked from friend and copied it 😅😅

@sugoi9680 Год назад

@@santoshpal8612 He doesn't have any friends lol

@irenee6064 Год назад

@@sugoi9680😂😂💀

@xijinping3543 9 месяцев назад

@@sugoi9680literally me🤣🤣😔😔😔

@undeada-man1920 2 года назад

Much better explanation than my professor, thank you!

@theprophetspath9929 2 года назад

On timing 5:30 why current not flow through 10ohm resistor

@aminashahzadkhan6966 Год назад

How do we know that there is zero current in 10 ohm resister ??

@PriyaGupta-qt4kh 4 года назад

Well explained 👍

@anandkumartiwari5864 3 года назад

If you apply nodal analysis at principal node 1 &2 you will get same potential of 20 volt so there will not be any current through 10 ohm resistor

@soudip8770 2 года назад

Ek q m help krdo mera koi

@aryantyagi9426 2 месяца назад

@@soudip8770 haa

@BharathKumar-rp5sg 4 года назад

Sir, in that example why the 4A and 5A currents from independent current sources won't enter into the branch consisting of 10 ohm resistance ? Please say sir..

@solaimanabdullah4611 4 года назад

@NesoAcademy please answer this question. Why 5&4A current didn’t enter into 10ohms registance?

@SasawataDG 4 года назад

@@solaimanabdullah4611 and @Bharath Kumar, if you assign nodes A and B at the left and the right end of the 10 Ohms resistor terminal respectively and apply KCL at both of them, you will get two equations as follows: 3Va - Vb = 40 ---------------- (i) 3.5Vb - Va = 50 --------------(ii) If you solve these equations you'll get Va = Vb = 20V So, the current through the 10 Ohms resistor would be (Va - Vb)/10 = (20 - 20)/10 = 0A. I hope this clears the confusion. Alternately, you can see that when the source is transformed, you get 20V on each end. making the potential difference to be zero, subsequently, making the current through the resistance = 0A. But as the lecturer mentioned, you must not take this into account for power calculation because it will involve the current through the actual circuit and not the transformed one. Thank you and happy learning!

@solaimanabdullah4611 4 года назад

@@SasawataDG thanks ❤

@Varun-zd8vm 2 года назад

@@SasawataDG thanks sir

@RSA_Shock 2 года назад

@@SasawataDG thanks so much

@ashutoshgupta549 4 года назад

Sir you have not made video lectures on operational amplifier it is very important topic for gate and ese exam . Sir i'm dependent on your lectures because signal and system, digital electronics and network theory you have teached very well Please sir respond and make video lectures on operational amplifier , multivibrator and feedback amplifier

@tıbhendese 3 года назад

5:30 how the current is not entering ? how its 0 ? I dont understand that , please anyone clearify that

@meghanakrishna309 3 года назад

Current always chooses the path with lower resistance and also apply kcl at two nodes you will get the current zero passing through that resistor

@academicstuff548 Год назад

5:07 but applying node voltage analysis here gives different results.

@AdithyaSanthosh-d5g 4 дня назад

Nah, same result, I got potential left of 10 ohm and right of 10 ohm as 20, so current=0

@somanathsahoo5668 4 года назад

Maza aa Gaya bidu

@elonmusksake9141 4 года назад

Please upload power system

@ankurkar7985 3 года назад

sir if we r asked to determine the power dissipation of 5 ohm resistor what would be the ans?? And sir how could u take 0A current via 10 ohm resistor from both side at "case no-1"??

@adityaoberoi266 3 года назад

How did 0A come through 10 ohm resistor?

@ankurkar7985 3 года назад

@@adityaoberoi266 that's what i was asking for..

@HarshSharma-hl9xg 3 года назад

The points between which 10 ohm resistor is are at equal potential that's why no current flows through it.

@12121921 2 года назад

Very clear

@wolffang3986 2 года назад

Why when transforming the Nortons eq does the resistance need to be in parallel with the current rather than in series?

@edgbaston149 3 года назад

Thanks sir

@assamesetrader9 4 года назад

Sir what about machines.. Its very important for us..

@Crusader2 4 года назад

sir,please do make a video on ldic

@piyushkumarsingh0694 Год назад

I am confused about why the power through the 5 and 4 ohm resistors is zero even though the current is flowing through it. Shouldn't it be P = i^2 x R so P(5 ohm) = 4^2x5 = 80 W?

@mohsin007 11 месяцев назад

Current isn't flowing as the 20-volt EMF source on each side is canceling each other.

@Arjun-oh9ob 7 месяцев назад

simply apply kvl you willl get I as 0 A

@AadityarajKaushal_1 7 дней назад

Without neso acad, i'd be cooked

@akashsk6478 2 года назад

Sir your teaching is very Nice. One suggestion from me that i feel subtitles are not required below video steaming, what you speak that everyone can understand easily so, not need to show subtitles, because of subtitles are covering other entries that you will be writing /explaining to the next steps. So we are facing the problem for assume that next entries are not able to see properly so, little bit tough to understanding..