Sovol SV08 Budget Touchscreen Install & 1st Impressions!

Подписаться 3,3 тыс.

Просмотров 9 тыс.

50% 1

The SV08 is Sovol's latest 3d printer. Based around the design of the Voron 2.4 it features a Core-XY motion system, a flying gantry, a high flow hotend, and a click wheel screen... In this video we will go over my first impressions of the Sovol SV08 including the pros and the cons of the machine. As well as replacing that encoder wheel screen with a Klipper screen Touchscreen from ‪@bigtreetech5117‬. Check out the video to see how we get that installed w/ practical l 3d printing to make this 3d printer mod work!
*** ‪@nadir3D‬'s Screen Mount STL Files: www.printables.com/model/8486...
---------------------------------------------------------------------
Products Featured (affiliate links):
*** ‪@Sovol‬ SV08: shrsl.com/4k8f9
*** Sovol $99 Screen: shrsl.com/4k8fc
*** BigTreeTech HDMI5 Screen: amzn.to/3VmqMpk
*** BTT Official Store: shrsl.com/4k8f6
*** M3 Screws: amzn.to/3V8KLGu
*** Electric Screwdriver: amzn.to/4e2Fk4K
*** ‪@Polymaker‬ Filament: tinyurl.com/Polymakerr
*** ‪@KONDORBLUE‬ Coiled HDMI Cable: amzn.to/3KrQ7rK
*** 16" USB-C to A Cable: amzn.to/458xMco
*** Soldering Iron for Inserts: amzn.to/3yL9dXa
*** ‪@CNCKitchen‬ Heat Press Tools: cnckitchen.store/products/ein...
---------------------------------------------------------------------
Join this channel to get access to perks and directly support this content:
/ @mandiclabs
Timestamps:
0:00 - Intro
0:26 - Things I Like
1:14 - Things I Dislike
3:17 - What we are modding!
4:36 - Nadir's Design
6:15 - Accent Color? Blue or Blue?
7:54 - Disassembly
9:05 - Mounting Holes
10:06 - Heat Press Inserts
10:48 - SCREEN ROTATION IMPORTANT!!
11:16 - Screen Mounting
11:58 - Mount to Machine
13:34 - HDMI & USB
13:53 - IT WORKS!
14:54 - Outro
15:20 - Blooper
Music Courtesy of ‪@epidemicsound‬: www.epidemicsound.com/
#3dprinter #sv08 #mandiclabs

Наука

Опубликовано:

30 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 56

@nadir3D 28 дней назад

I`m Glad you love it. an thanks for the shoutout

@MandicLabs 28 дней назад

Great work. Thanks for making it.

@dijitek 28 дней назад

So far love my SV08. Been basically printing non stop since it came in. Using a BTT HDMI5 since the beginning.

@leetpg 13 дней назад

Hey mate did your screen work out of the box? I got a btt5 and 7, both images are cut off and the touch is out.

@grasstreefarmer 28 дней назад

I would be moving that main board so the cables can run inside the machine and then just run an ethernet and USB extension to the skirt. That was one thing that surprised me. Sovol obviously intended to offer the display but set it up so the cables have to be external. It does make the electronics minimal and neat on the inside, and I guess it does mean you can move the display anywhere but is that really desirable? Dangling cables would annoy me forever. The coiled cable is better but still

@Duckferd 28 дней назад

It's just a friendlier and more intuitive interface. If you wanted a neater solution it would be a custom DSI solution with a Raspberry Pi so the cables could be completely hidden way... in your Voron. But the Sovol is a consumer product so things are probably expected to be more plug and play.

@t3chninja_official 28 дней назад

This has inspired me to modify and use that screen mount for my older Amazon Fire HD 6 tablet. I have my first Klipper 3D printer, The 100 Corexy, and love it now that I have a KlipperScreen for it but no mount just yet. Hoping I can mod that one to fit my tablet.

@DiomedesDominguez 28 дней назад

Almost Two months and no single youtuber has shown the SV08 completely enclosed

@MandicLabs 28 дней назад

Cause they haven’t sent us enclosure kits yet. They told me they’d be sending one but it hasn’t shown up.

@christopherwestphal7149 28 дней назад

Was almost expecting you to stop half way and just address the fan while you had the electronics bay open. To me the macros, tool-head (its pretty underwhelming), hot end (proprietary), bed (you mentioned it tho), and lack of panels not being default to me seems much more important. Though when you fix the bed you kinda want to have the probing system (not all that accurate by modern standards) and macros (i.e. not using the load cell correctly) fixed too so you benefit the most. Then again, to me there isn't much point in this system without the panels. There are cheaper just as good printers for doing PLA. Its more the ABS/ASA/PETG/etc filaments that need more of a controlled environment for, hence enclosure [739 USD /w panels]. Also Interested if their panels are any good or if its another drafty implementation like seems common these days. P.S. PLA and ASA (I think also ABS?) are Polymaker for Microcenter. Generally speaking all Inland stuff works with (good) Polymaker profiles even if I am not sure the source on the PETG yet.

@suivzmoi 28 дней назад

WHAT. its a design oversight to lose access to the LCD's physical buttons.

@truectl 28 дней назад

The buttons are for setting screen rotation and brightness. While it would be nice to have brightness controls readily available, for most it isn't a dealbreaker.

@AndyRC 28 дней назад

Nice. I am still considering getting one. Not sure if you are aware of this or not but Sovol sells the official Sovol blue PLA. I have a roll of it and it matches their printers.

@tannerbriton9027 11 дней назад

Sovol should release filament that is color matched to the sovol blue for people to mod their machines with.

@396strokerz28camaro 24 дня назад

PolyMaker PolyLite Stone Blue is the closest color matching filament I've found yet to the SV08's color scheme

@mikeskerritt9618 28 дней назад

Nice mod, I ordered the screen and printer together for Solvol, but I think yours looks great. When do you think you will replace the VERRY annoying fan on the power supply? I would have thought that you would've replaced that first . Regards. Mike Irish

@MandicLabs 28 дней назад

I’m not gonna bother with the fan. This machine won’t be making the move with me so that’s the next owner’s concern. I had wanted to address the fan in this video but the whole thing turned into a longer video than I anticipated so I had to move on.

@kilianlindlbauer8277 28 дней назад

The rigid z joints are actually better than flexible ones. What amount are you compensating roughly after enabling steppers? Less than a millimeter probably, across a 500ish long frame this is well within the flexibility of the plastic bits. Some high performance mods like the monolith gantry remove all flexibility in the z joints. Btw, have a look at that for your trident build, allows you to run crazy high belt tensions, most use between 200 and 300hz as well as reduces belt length by about 80 to 90mm while giving you a little more y travel. Files are available for 2wd and 4wd, 6mm belts, 9mm belts, 2.4 and trident. Only downside is that you have reduced toolhead compatibility, the belt teeth are now facing the other direction

@Barbasnoo 28 дней назад

Before I even powered on my SV08 the first thing I did was replace the stock main board fan with a noctua. Whisper quiet.

@blockhead3654 4 дня назад

Looks like the next ender 3

@ThisisDD 28 дней назад

SV08 uses a light periwinkle

@DiomedesDominguez 28 дней назад

Don't like the mod: too risky for me to have more cables where by accident I can pull them up. Great video, you can keep working on this kind of stuff.

@truectl 28 дней назад

Most BTT screens shipping now are the v1.2 variant which has the cables behind the screen rather than on the side. This means the cables can run through the bracket and into the machine where the existing hole is. There's even a free internal USB connection on the mainboard which can be used. For HDMI, on my machine, I am using a right angle adapter and routing the cable underneath the machine from there. No cables go around the side. Very low likelihood I'll hurt anything on my printer.

@MandicLabs 28 дней назад

You can hot plug the screen all day long. If you snag the cable, you just plug it back in and it’s fine. Or you get shorter cables and route them under the base of the machine. Or around the corner as I showed at the end. But yes there is a variant of this screen that has connections that aren’t exposed and this mount will work with that. However I didn’t get that one and it seems to be luck of the draw, from Amazon anyway.

@DiomedesDominguez 27 дней назад

@@MandicLabs Good to know, thanks.

@RocktCityTim 27 дней назад

Too late now, but for anyone else heading down this path, Sovol sells the Sovol Blue PLA. Still trying to convince myself that I need yet another Sovol printer ...

@oleurgast730 5 часов назад

Actually I like they use a cheap screen to keep the price low. Over time most people collect a lot of old smartphones and tablets, wich could be used as klipper screen. It is great to reuse theese old electronics instead buying new ones. Also reusing them is practicly risk-free, as the stock display is still usable. Forcing people to buy new display hardware even if they have everything needed already collecting dust imho would be the wrong way. I would even prefer no screen at all - you could use a 10 inch tablet and mailail or fluid directly. But a little cheap LCD just to see temperatures and progress is acceptable.

@Mobile_Dom 28 дней назад

AFAIK Polymaker does make the PLA for Inland, not sure about their PETG or ABS though

@murphydigital 28 дней назад

Inland ASA and ABS is also made by Polymaker. Unsure about Inland PETG; I know a few years ago it was thought that ESun was making that for them, but that may have changed.

@MandicLabs 28 дней назад

Problem with “white label” is it can change at any time. So I hesitate to say such things. Their ASA appears to be Polymaker (it’s even called Polylite ASA) but the rest idk. I know they change a color randomly that I used for specific product and it left me high and dry at one point.

@Founders4 28 дней назад

@@murphydigital If you're at Micro Center picking up filament all you have to do is open the box and look for the pill shaped cutout on the cardboard spool. This will tell you whether it's PolyMaker (with pill cutout) or eSUN (without pill cutout). Inland used to relabel eSUN & SUNLU but during the pandemic they were having supply chain issues and Micro Center decided to source from both PolyMaker and eSUN to avoid restocking issues. So, the cheapest source for PolyMaker is Micro Center, If you don't have a Micro Center near by all Overture filament is produced by PolyMaker as well.

@raypalmer7733 9 дней назад

Why not make two holes (plus grommets) for the cables to hide them better. 1 next to the screen and 1 next to the ports and feed the cables inside the machine thus only showing the cables next to the port and screen. IMHO would look better than loose cables on the outside.

@AnonymerTraum 27 дней назад

is it possible to add an touch screen monitor with 22" too or is it necessary that it is a little one?

@MandicLabs 27 дней назад

The only real requirement is that the screen has driver support in the particular Linux branch that you are installing on your Klipper powered printer. The smaller monitors that are used are often made specifically to work with basic Linux drivers to make them as easy as possible to setup. Some WaveShare small screens require driver installation to function and that starts to be deeper command line configuration than a lot of people want to get into. All that to say, there is no reason you cannot put a 22" touchscreen on if the drivers are there. I'd say most folks just don't bother cause even a cheap screen of that size costs more tan a lot of 3d printers do. No guarantee the image scaling will be correct, but it could be a fun adventure. I've actually got a 55" touchscreen for my new studio setup... Should we? haha

@AnonymerTraum 27 дней назад

@@MandicLabs thank you :) 55" sounds nice, would definitely look good on the thumbnail too.

@Flying--T 28 дней назад

Huh, you are moving soon? Didnt you just build out your garage as a better studio? :D

@MandicLabs 28 дней назад

Yeppppp. So well timed. 😑🤣 Now I get to do it again, and better!

@leetpg 11 дней назад

Very strange, the rotate button on my screen doesn't rotate, it mirrors the image.

@platinums99 16 дней назад

Nadir - Yourtube wen?

@jenspaschmann7906 28 дней назад

The idea is good. But when I see that the BTT screen costs me 60 €, I calculate the print file and the conversion effort, the original Sovol screen is not that much more expensive.

@MandicLabs 28 дней назад

This is always the hard part of these things. Here it is less than half the price to get the BTT screen. When I bought it last week it was even cheaper. Never know what prices are like around the world unfortunately.

@xeraoh 27 дней назад

on the official btt site the hdmi5 is 41 euros ($44.60) with delivery from China, how come it is 60 euros?

@EWmedia 28 дней назад

I never use the screen I look at the computer screen and using the web interface on my vorons

@MandicLabs 28 дней назад

It’s very handy for load and unload of filament, quick offset adjustments, pre heating while doing other things in the studio, and manual movement while physically working on a machine. That and connecting to WiFi over KlipperScreen is the simplest way of doing that in Klipper. I ran my Klipper machines headless for a whole but have grown attached to the screen’s functionality.

@riba2233 28 дней назад

Why are you not making reviews anymore?

@Mobile_Dom 28 дней назад

the effort and time that goes into them is not worth the views and money out of them.

@riba2233 28 дней назад

@@Mobile_Dom idk, reviews are very popular content on yt in general and get lot of views. also not everything has to be just to max out views, that is the difference between quality youtubers.

@MandicLabs 28 дней назад

My absolutely most popular 3d printer review has paid about $400 in a year and a half. It took about 40 hours of work to produce the video (not counting the 100+ hours of print time and diag time on the machine) and I used about $300 worth of filament for that video. (Before I had a filament sponsor.) It pains me to not do them and put that information out, but it’s just a failed business model for me. I’d go bankrupt trying. Instead I just drip in my thoughts on machines in videos like this and in conversations on live streams. It’s a much more sustainable way of handling things.

@riba2233 28 дней назад

@@MandicLabs interesting, thanks for the insight! A bit surprising that reviews are not performing better.

@Mobile_Dom 27 дней назад

@@riba2233 views can do well, but the views dont matter when the CPM sucks and you have to put a significant amount of investment, whether time or money, into it