SoyuzMade: Handcrafted Microphone Capsules 

Awesome, Dims! We're so glad to hear it.

😅

That's very interesting! Please write to me at soyuzmicrophones@gmail.com

248 holes hand drilled? I would go nuts doing that all day every single day.

@@generalawareness101 There is a special tool that is named "кондуктор" ("conductor") in russian.

@@user-ng9xr4rj3q I have never seen one of those. How does it work and how small can it drill if it even drills?

@@generalawareness101 You could see the conductor on 1:12 - a perforated jar with a screw cap. But usually in mass production screw caps are not used due to the length of time. Usually there is a simple hinged lid or none one at all. I dont know how conductor is called in english.

@Ваня Ка I re watched it at your time mark and I don't know either BUT I stand by what I said because they are, indeed, hand drilled even though they use a guide it is still a very monotonous job at best.

Spasibo!

Thanks, Steffan! We're glad you enjoyed it

Please do! :)

Thank you!

Thanks, Nad!

That would be challenging😅

Thank you!

Thank you!

Thanks so much!

Thank you!

Yes, it is only electret capsules that have to be polarized in a factory, for true condenser ones like this one the polarization voltage is supplied externally through phantom power. And you shouldn't touch the diaphragm, that is correct, but that's simply because it is very thin and can be easily damaged, and also the gold coating can be easily rubbed off.

@@RusAD-gb9jk alright thanks for your answer.

Si! los backplates son hechos de latón y el diaphragm es mylar con oro

Thanks a lot

JZ microphones are spirited from soyuz (cccp) skills and mastery. Get one of those. One of the best Top performance per price there is.

We have one for you!😅

So the flatness is achieved via lapping on the plate an not by the lathe right ?

Factologist it's not lapping, it's "final grinding on a special surface!" Haha

basically, its all just marketing garbage...

Ручная притирка, плоскостность 2 мкм. Что вас так удивляет, товарищи?

Это просто индикатор. Советские были качественные, но и сейчас в России их делать пока не разучились. Импортные не хуже, но если нет разницы, зачем платить больше.

я тоже((

You're not far off! But we have an Ivan and a Sasha as well 😅

@@soyuzmics lol any Boris or Vladimirs? This video is so relaxing to watch. Such precision and craftsmanship is an art form.

not in our experience

Do you think that countersunk would be better? Why?

@@user-ng9xr4rj3q philips, hexagon, torx... Flathead name comes from the tool type not the shape of the screw head.

@@tommibjork А, так речь про прямой шлиц? Is it about a straight slot? I do not understand english well. What is wrong with straight slot?

Продам микрофон союз,дёшево.

@@ZOV1980 Скинь денег пожалуйста

If only that were true, our job would be much easier😅 The acid test is always the sound. We share this just to show people the lengths we go to in pursuit of great sounding mics and because we think it's fun for them to see the processes involved.

Do you know what causes the capsule to do so? What capsule design would you suggest?

Читаешь коммент, потом имя и вопросов к тебе не возникает =)

@@moviegear Это точно)

Glad you enjoyed it😅

So what? In world of music quality in quantity suffers due to price range that must be adjusted to general public needs. Think of it as gold plated Toilet Bowls .- the quality is the same as the average bowl, but due to its price quantity is small . For "Cold Play" it was simply a deal . Let me ask you how many times have you seen in the past 5 years mark on the product - Made in USA? You probably did not. Because such product is rare, pricey valuable and trusty . Is it always true? In 99.999% of it yes it is. And now take Russian products. most of them piece of garbage . If you find one that is not you are lucky guy.

stivep1 Fellow Americans? ) You don't sound like an American, more like another illegal immigrant from ex-soviet republics who is bitter about Russia. If you think that making a reference-class mic is that easy then why haven't you done so? Why haven't you opened a factory in your basement? Because you can't and you know nothing about microphone manufacturing. As far as I can tell you are only capable of badmouthing and bashing other products based on the nationality of a person who made it. That's disgusting. BTW these mics are used by Radiohead, Coldplay and Paramore and I doubt that they would have used a "piece of garbage" in their music production and studio work.

Dear Russian Xerxis You are absolutely wrong in your assessment . But that is OK You are here on American RU-vid , using American computer (licensed to American facilities in China) and American Windows/ Linux/Apple/Aiphone (any other software is likely Western but not Russian) Well..USA and EU found that *"Kaspersky Software"* was made to *Spy* but advertised by Russians as *"advanced"* "protection". And best of all , you have rights to express yourself thanks to *American Constitution* ruling outside of Russia - the country where every other law is raped and abused. Look at my RU-vid. *I'm American.* I'm quite well , in electronics, and physics is my field and my life. (over 30 years in science). I'm not, as you say it- The illegal immigrant from (ex-soviet), Russia who is bitter about Russia. When Russian primitivism in mechanics is advertised , as a craft/art, that must not be replaced by Russian automation, - You should understand that there is NO Russian automation, It does not exist . *Art of primitivism* is present in all aspects of Russian reality as *unfortunate necessity* , but *not as a choice* . or form of expression. 99% of machines are not made in Russia anymore. Even Mr. Mirzayanov who made Russian biological weapon *Novichik that kills in England* (Skripal case) run for safety , to the United States in 1995 after 30 years at sort of *concentration camp* but made for scientists : The ( "closed town- Shikhany ") - Rusian Research Organic Chemistry GNIIOKhT (and it's affiliates.) Putin few days ago decided to change the status of facility/ town of Shikhany that was manufacturing Novitchok poison weapon from "secret camp" to "normal city." acting under the pressure of England. (the attempted murder of ex-spy Sergei Skripal along with his daughter Yulia in March.) So automation in Russia is not the ever-present threat of hostile actors looking to inflict mayhem on our nation’s railroads. It is just technology from outside of Russia that was legally or mostly illegally transferred there, from outside world.( e.g . Siemens the German-made electricity turbine that was installed in Crimea in contravention of European sanctions. by Russians . - That is Russian fraud. ) However we - THE Western World , we may try to understand that Russian HAND-MADE MICROPHONES are excellent Russian replication of quality of American James West and Gerard Sessler of Bell Labs *History:* The electret was discovered by Mototaro Eguchi in 1919, Professor of Physics, Higher Naval College, Tokyo, Japan. (not by Russians), but was not used for microphones until about the 1960s, when James West and Gerard Sessler of Bell Labs invented the foil electret microphone. We may say that Yes.. Yesss... Russians are good in it... But why we need to pay 4k per piece if my lab or any lab traceable to American National Bureau of Standards can prove that some of 8 or 12 American dollars worth Chinese replica can do the same or better. And this is REAL EFFECT OF AUTOMATION. The other way to look at it is emotional in nature. - why we Americans, need to support CRIMINAL ENTITY in power , that makes even their own Russian crowd to suffer . What for? Example: Nurse in USA NY earns ~ $87000 per year. Nurse in Russia earns ~$189 per month But that is just emotional aspect that may not be important to many. Wesley USA

@@stivep1 you totally brainwashed, my dear american friend

Этот человек имеет близкое к реальности представление о текущем состоянии российской промышленности, но он плохо себе представляет реалии промышленного производства. А в политике и экономике он вообще профан. Добиться с помощью ЧПУ себестоимости в 30 долларов возможно только при крупном серийном производстве. Но изделие серийного производства никогда не сравнится со штучным. А при штучном производстве ЧПУ оно нафиг не нужно, и даже вредно. Я работал и на том, и на том - это просто разные вещи. Хотя, конечно, моей пролетарской душе милее серийные микрофоны по 40$ а не штучные 4000$ - по соотношению цена-качество оно того не стоит.

IF U R making a moronic comment like this you need a carbon microphone from a 1910 telephone. This type of quality is beyond your comprehension.

I don't know, but tighter tolerances may allow you to have a smaller gap from the membrane to the backplate. The smaller the distance, the greater the capacitive changes when sound hits it, the better the signal to noise ratio?

we at soyuz found 2.17 micron tolerance was just not enough...so we rounded it to 2 micron..🎉😂😂🎉😂