Speedway Motors 12 Circuit Wire Harness Install: Part 1. Bad Hombre Garage Ep 43

Подписаться 6 тыс.

Просмотров 37 тыс.

50% 1

12-Circuit Mini-Fuse Universal Hot Rod Wiring Harness Kit
Universal Fit, 12 Number of Circuits, Fuse Block Included, Compatible with GM Column
Speedway part number 910-64017
In this episode I use Speedway Motors' 12 circuit wiring kit and get most of the wiring installed in my '29 Ford Model A. I take you through unpacking through getting the main bundles set toward where they will end up and show a few tips along the way. Stay tuned to the channel as Part 2 will follow shortly showing the final product installed.
#speedway #wireharness
Here's the link to the wiring harness instructions:
static.speedwa...
Here is a link to a mounting plate for the fuse block:
bp-automotive....
Do me a favor, and hit the Subscribe button while you're here-
Contact Joe:
Email: badhombregarage@gmail.com
Instagram: bad_hombre_garage
Facebook: Bad Hombre Garage
Thanks for finding my channel! This is a follow-along series while I work on projects, though some may consider it a rat rod build or hot rod build series. There's plenty of how-to, though I'm not an expert! Watch and you tell me!
I'm just one dude in a two-car garage building hot rods and living the American Dream! Follow along- Let's build this community!

Опубликовано:

28 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 93

@homespuntools2115 4 года назад

Hi Joe , very handy information .Sure is a whole lot better than old cloth covered wires , and the worries associated with them .Well thought out Joe . Thanks for posting .

@BadHombreGarage 4 года назад

Thanks! I used up too much brain power in this one. I need to finish the car so I can just drive it.

@IowaMercMan 4 года назад

Funny. I was throwing out tips and tricks last week, and you were way ahead of me. Nice job!

@BadHombreGarage 4 года назад

Oh no, your tip was noted! I did as much as I could while the dash was apart and I didn't have to lay on my back.

@mrSweetpotato67 4 года назад

Awesome video. Getting ready to wire an old Scout and this will help a lot!

@BadHombreGarage 4 года назад

Thanks!

@kevinlowe4845 Год назад

Awesome video my friend

@BadHombreGarage Год назад

Thank you for watching!

@slowshop 2 года назад

Thank you very much! This is going to be extremely helpful for me. I got a noname wiring system without any instructions and I see now it's the same as the speedway and their instructions will work. 👌👌

@BadHombreGarage 2 года назад

I’m glad you found it helpful!

@juanbarturen2726 2 года назад

Very good information. Thank you. I'm going to go Speedway 12 circuit on my O'l Beater 54 Chevy truck. I almost screwed up and ordered a no name harness. Probably nothing but trouble. I will be contacting you. Thanks.jb

@BadHombreGarage 2 года назад

Great! I recommend it; let me know how it goes.

@juanbarturen2726 2 года назад

@@BadHombreGarage yes, I would have made a big mistake if it weren't for your advise. I love you Hotrod. That is my dream. Always has been.

@juanbarturen2726 2 года назад

It's going to. Be a while 6 months at least. I'm retired from AA . Aircraft mechanic. Bought property in Tn. And my wife wants to be a snow flake. Go back and forth. I go to farms look in back. Find parts. Lots of car shows with flea market. I'll come back loaded with stuff.

@BadHombreGarage 2 года назад

@@juanbarturen2726 sounds good!

@parkergriffin955 3 года назад

So I had a question about the flasher/hazard wires.. snd the speedway turn signal set up. Turn signal diagram shows 3 pin flasher but 12 circuit kit comes w/2 pin. So not sure how to wite them, any advice? Thanks

@BadHombreGarage 3 года назад

Thanks for checking out the video! You’re right, the setup is kind of a pain with the 2 pin. I used the 3 pin flasher; honestly I can’t remember exactly which wires I used, but I can check it out when I get home and tell you how I did it. There’s also an explanation in part 2 of my wiring video- go check it out and if you have questions shoot me an email at badhombregarage@gmail.com.

@jeffb4388 2 года назад

@@BadHombreGarage I had the same issue and converted to a 3 pin flasher which also happens to be a headlight pigtail.

@ScottRods 4 года назад

Funny how we start running out of words the later we work, lol. Do you have a link to where I could download that wiring manual?

@BadHombreGarage 4 года назад

static.speedwaymotors.com/pdf/910-64017.pdf Here you go!

@ScottRods 4 года назад

@@BadHombreGarage Thanks bud.

@juanbarturen2726 Год назад

Thank you. Very Helpful. What is the part number for that kit you are using please? And the manual?

@BadHombreGarage Год назад

The kit is part number 910-64017. There’s a link to the instruction manual in the description for this video. Thanks for watching!

@juanbarturen2726 Год назад

@@BadHombreGarage I'm Hombre Viejo.....my 54 Chevy Truck.aka Ol' Beater. Has been waiting in my garage for over 30 years. Now it time for som TLC. Beater style

@BadHombreGarage Год назад

@@juanbarturen2726 haha! I love it.

@466Kishan 3 года назад

I have the 22 circuit harness and there isn't an instruction booklet like the one for the 12 circuit 😢

@BadHombreGarage 3 года назад

Bummer! I just installed the 22 circuit kit on a truck for my day job and was pretty happy with the information that came with it. Just apply the same principles of drawing out a map of each electrical component and where it is located before you lay out the wires.

@stevec5632 Год назад

What size wire loom did you use?

@BadHombreGarage Год назад

I didn’t use much, if any. I just used zip ties to hold it together nicely.

@cdunham9938 2 месяца назад

I have the speedway harness and running into some problems. If you are available to reach out I would appreciate it.

@BadHombreGarage 2 месяца назад

Absolutely, I'll do my best. Email me at badhombregarage@gmail.com and we can set something up.

@noneckjoe948 Год назад

I hope you get this question…. I finished my install and battery continues to drain… noticed alternator stays warm at all times.. figured out exciter wire is constant hot and not keyed on the harness…is that right??? Any thoughts?

@BadHombreGarage Год назад

Yes, it looks like you'll want that to be keyed power. Here's a video I did that includes how to wire up the three wire alternator, it that is helpful. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-7Ih-TQSvhss.htmlsi=sFLg_CM-Gcs1101T

@noneckjoe948 Год назад

@@BadHombreGarage I did figure out my issue… videos have been a great help. I somehow had a hot wire connected to the ACC on the switch…. Thus giving me constant hot to exciter…. Thanks! I’m sure I’ll have more questions…

@BadHombreGarage Год назад

@@noneckjoe948great! Glad you figured it out.

@noneckjoe948 Год назад

@@BadHombreGarage I get to enjoy a double dose of good info cuz my project is an old 69 cj5…🤣

@lindawall498 2 года назад

Is there any way you could make a video specifically talking about fuses & fusible links when and where? I'm doing this my very first time and these are the things I'm struggling with. Just want to be as safe as possible. #feralcj

@BadHombreGarage 2 года назад

I think that’s a good idea, maybe this weekend I can crank up the heat in the garage and make a quick video outlining those wiring details. Thanks for watching and asking the question!

@juanbarturen2726 Год назад

Hombre malo

@BadHombreGarage Год назад

Haha! Yes!

@hellraiser1478 6 месяцев назад

Would like to replace the harness in my '77 Big10, but not sure if I should use the 12 or 22 circuit. Don't have power windows, power locks, AC or CB radio. Not even a dome light, but would like to have the option to add one. The 22 circuit has a lot of extras and is only $10 more than the 12, so I'm leaning towards the 22. I'm totally new to all this and looking for suggestions, questions and answers. Thank you for the great video-tutorial. Cheers

@BadHombreGarage 6 месяцев назад

Thanks for watching and for taking the time to ask a question! I think that you can't go wrong with the 12 circuit, but that if you did get the 22 circuit you'd be able to add more accessories later on. I'd probably go with the 22 if I was building that '77.

@MMCGRACING 4 года назад

I feel your pain (less) get it lol 😂, painless wiring, anyhoo not funny, I’m still doing wiring on the elco, sometimes I think I should of just gutted it all and do what you’re doing, and I still might, I have a new used factory harness for mine, decision decisions huh, 🤙🏻👍👍🤙🏻 video

@BadHombreGarage 4 года назад

Haha! Good one. If you do gut it and start over, you'll know it's done right!

@jimhiscott2918 2 года назад

Those but connectors that have the solder and shrink tube all in one. Take it from me and don't use them. Yes they are a sweet little concept however they are very prone to failure very often

@BadHombreGarage 2 года назад

Thank you! I appreciate you sharing your experience with those butt connectors. I'll stay away from them.

@bryco32 2 года назад

What did you do for a Reverse light wire? I cannot believe this harness is missing this.

@BadHombreGarage 2 года назад

Great question! I do not have one. I believe that if you were connecting to an existing reverse light switch in your factory column or in the transmission, it would be pretty easy. But, yes you are right- they should have one!

@bryco32 2 года назад

@@BadHombreGarage Yeah it's crazy. Even the $35 and $50 harness' on amazon include this. I have to have them even on my Old arse Jeep cj5 for safety inspection. I never got a reply from Speedway about this when I found it out last week when I started wiring it up. I guess I'll have to use the 3rd brake light wire they included in the kit and figure out how to wire it. Also What Blinker relay did you use? My 22 circuit kit didn't include it. I don't know if mine was a opend return or what.. Instructions and picture says it was supposed to come with it. I'm really trying to not let the hiccups let me down. But Some other guys on the Early Jeep forums used the bare bones $50 cheapo harness without any issues. I had to go all out and spend $175 more on this thing.... :/

@BadHombreGarage 2 года назад

@@bryco32 I had to use a 3 prong flasher to make the turn signals work. I used a cheapie turn signal unit, like the $13 kind you can get on Amazon. It won’t work with the 2, 2 prong flashers that usually come with the kit. In my old Jeep (‘64 CJ5), the turn signal switch looks about the same, so I imagine it would work the same. By the way, I’ve emailed speedway several times and have never heard back from them. I have had good luck with their phone line.

@SuperDirtyred1 11 месяцев назад

Hello, Great Video. I have a problem maybe you can help. I just bought a Amc Jeep 290 304 360 390 401 Pro-Billet Ready-to-Run Distributor. No Instructions. I don't want to wiring it wrong . Sure I think I know how to do it . But i'd rather be right than wrong. Gray Tach wire . Black ground anywhere I suppose Block . Red positive coil with my hot Ignition wire . Orange must go to the Negative side of coil ? I've looked all over there website No wiring instructions .

@BadHombreGarage 11 месяцев назад

That all looks right to me. I agree, orange wire to negative side of the coil. Just make sure you have good grounds… block grounded to the frame, body grounded to the frame, battery grounded to the frame…

@ronsgarage4230 4 года назад

I will be doing wiring soon. I already bought the fuse box and some relays. I am going to mount them together and then run some wires. If you saw the inside of my truck lately I have more than enough wire lol.

@BadHombreGarage 4 года назад

Haha! Get r done!

@johnbruce1216 4 года назад

Just came across your video.. i am getting ready to install a 20 circuit in my 41..thanks for the tip on 700R4 and printing off instructions.

@BadHombreGarage 4 года назад

Thanks for watching! I hope it is helpful.

@obetwokenobi458 3 года назад

Head lights on the left, ignition on the right.

@BadHombreGarage 3 года назад

Ah man, I went the opposite!

@aussiejas6599 3 года назад

Great video SUBBED...!

@BadHombreGarage 3 года назад

Very cool, Thanks!

@VinnyMartello 2 года назад

The semi-original hack job wiring harness in my 66 Chevy desperately needs replaced. Thanks for the video; a little help goes a long way.

@BadHombreGarage 2 года назад

Thanks! I hope this helps make it easy for you.

@NZMOPAR 4 года назад

They look like a nice kit

@BadHombreGarage 4 года назад

I like them.

@josephmeredith2204 2 года назад

How do you eat an elephant? One bite at a time.

@BadHombreGarage 2 года назад

That's right!

@666banger 6 месяцев назад

Hombre, on your 12 circuit harness, did the ignition switch power wire branch into two? I can't make sense of that. Where does the extra wire go on the ignition switch?

@BadHombreGarage 6 месяцев назад

Well, I just spent the last 30 minutes going through my wiring paperwork and laying under the dash of my car to see if I could help you out. Unfortunately, I can’t see where that wire branches. Does yours branch close to the ignition switch? Is it the wire labeled “33 Ignition Switch Power”?

@666banger 6 месяцев назад

Yup that's the one. I think I have everything wired correctly but somehow I am not getting any spark. I'm thinking maybe that black pigtail has to go somewhere. I appreciate all your help. May you be rewarded in hot rod heaven!

@BadHombreGarage 6 месяцев назад

@@666banger I will keep thinking about this and trying to come up with a solution.

@666banger 6 месяцев назад

Talked to Speedway. You can cut the black pigtail off if you don't need extra accessory power. I am still not getting spark. Time to roll up these sleeves!

@sinistersilverado965 Год назад

you don't look like a Bad Hombre

@BadHombreGarage Год назад

Haha!

@ke6bnl 4 месяца назад

Thanks for manual url

@BadHombreGarage 4 месяца назад

I’m glad you can use it.

@fredflintstoner596 2 года назад

Basil: (pointing to the lovely view) "That is Torquay, Madam." Mrs Richards: "It's not good enough!" Basil: "May I ask what you were expecting to see out of a Torquay hotel bedroom window? Sydney Opera House, perhaps? the Hanging Gardens of Babylon? Herds of wildebeest sweeping majestically past?..." Mrs Richards: "Don't be silly! I expect to be able to see the sea!" Basil: "You can see the sea, it's over there between the land and the sky." Mrs Richards: "I'm not satisfied. But I shall stay. But I expect a reduction." Basil: "Why?! Because Krakatoa's not erupting at the moment ?"

@BadHombreGarage 2 года назад

You got me on that one… thanks for watching and commenting!

@JohnMartin-eb7jn Год назад

Watched you video. I have called speedway twice on how to mount the fuse box due to their lack of a mounting bracket. Speedway had no clue that there is no product in their kit to mount the fuse box. After seeing your link for a bracket i ordered one. Thanks for that tip.

@BadHombreGarage Год назад

Very cool! Thanks to you guys that watch the videos we got it figured out. That’s what it’s all about! But yeah if you want to call Speedway again and let them know how helpful my videos are, I mean that’s cool too… 😎

@mookandairin 2 года назад

You gotta love a guy that aint afraid to smoke the tires as hard as he does in the opening videos. SCREW WHAT THE WIFE SAYS LOL!

@BadHombreGarage 2 года назад

Ha! Thanks man, Yes I really like burnouts.

@edwardcoleman8745 3 года назад

What does it cost,,I don't want to give more for a wiring harness than I did for the whole car,,,

@BadHombreGarage 3 года назад

I just checked the website and they are currently listed at just over $200.

@edwardcoleman8745 3 года назад

@@BadHombreGarage tkx

@edwardcoleman8745 3 года назад

@@BadHombreGarage got no turn signals,break or park lights,,,,,, looks like someone put a weedeater under the dash,,,65mustang should be easy to fix with a new harness,, Nothing is power,all manual,,,

@BadHombreGarage 3 года назад

Good luck with it! Just take your time, it isn’t too hard.

@andrewconrad8751 Год назад

Hey awesome video. I have this same kit and only have power on half of the fuse block. Any ideas why this might be? I have double and triple checked everything. It's driving me absolutely crazy.

@BadHombreGarage Год назад

Hmmm, there’s a chance the fuse block is messed up, like a break in the common bus inside of it. I would just make sure the main power wire (the fusable link wire) is connected right, and if so then I’d bet the fuse block is messed up in the inside.

@BadHombreGarage Год назад

Did you figure it out? I was messing with my car yesterday and thought of something really simple. Is the key on? With the key turned off only about half of the fuse block has power, and when I turn the key on they all have power. I know, maybe too simple but it had me going for a few minutes while I was checking fuses.