No video :(

SPLINED and Inlaid, Mitered Dovetail Corner - Joint of the Week Redemption

Подписаться 556 тыс.

Просмотров 713 тыс.

50% 1

Get the Katz-Moses Magnetic Dovetail Jig here: www.KMtools.com
Let’s try this again. This week's woodworking joint of the week is the SPLINED, Inlaid, Mitered Dovetail Corner. This week I took the time to reinforce the joint with and ebony spline and inlaid it with purple heart. I feel that this one is way stronger and also way cooler looking! The woods I used were quilted maple, ebony, purple heart, and lacewood. Let me know in the comments what joint you’d like to see next week. Thanks for watching! Please like, comment and subscribe. Cheers!
----
*Check out OUR BRAND NEW STORE for tons of great Tools and Support the Katz-Moses Woodworkers with Disabilities Fund*: www.KMtools.com
Buy the Katz-Moses Stop Block: kmtools.com/co...
Buy the Katz-Moses Magnetic Dovetail Jig: kmtools.com/co...
*Buy the Katz-Moses Woodworking Apron*: kmtools.com/co...
----
Taytools is my favorite woodworking tool source: lddy.no/e90a
I have Walnut Slabs for sale: kmtools.com/co...
BitsBits is the BEST place to buy router bits: bit.ly/BitsBits USE CODE JKATZMOSES15 for 15% off
Total Boat Epoxy: bit.ly/30bA39o 10% Discount code JKATZMO
----
Essential Woodworking Skills Playlist: • Essential Woodworking ...
----
Woodworking Routers Video Playlist: • DIY Router Table Build...
----
Woodworking Joint of the Week Playlist: • Woodworking Joint of t...
----
Woodworking in SLOW MOTION Playlist:
• Slow Motion Woodworkin...
----
Tool Tune Up Thursday Playlist: • Tool Tune Up Thursday
----
Check me out on social media:
jkatzmoses
www.Facebook.com/katzmoseswoodworking
patreon.com/katzmoseswoodworking
/ katzmoseswoodworkingshop
----
Tools I love:
My Apron: kmtools.com/co...
My favorite Dozuki dovetail saw - shop.kmtools.c...
My favorite Ryoba saw - shop.kmtools.c...
Marking Gauge: shop.kmtools.c...
Marking Knife: shop.kmtools.c...
NEW Suizan Flush Trim Saw: shop.kmtools.c...
Narex Richter Chisels: lddy.no/ussg
Knew Concepts Coping Saw (best deal I’ve found): lddy.no/120mz
Dewalt Planer Package: amzn.to/2thEf6O
CMT Chrome are the Absolute Best Table Saw Blades (JKM10CMT for Additional 10% Off)- lddy.no/ggf9
Great Small Tape Measure: lddy.no/120n2
BLEM Combination Squares (high accuracy and value at a fraction of the price due to cosmetic scratch): lddy.no/120n3
The ABSOLUTE best Sandpaper on the market: lddy.no/10ucv
Dewaxed Shellac Flakes: amzn.to/2FeqqYh
5 Minute Epoxy 10% Discount code JKATZMO: bit.ly/30bA39o
2:1 High Performance Epoxy 10% Discount code JKATZMO: bit.ly/30bA39o
Dewalt Trim Router: amzn.to/3Ay6c7D
Dewalt Full Size Router Kit: amzn.to/3FH8Njp
Dewalt Planer: amzn.to/2YSkpiS
Bosch 1.25 HP Colt Router: amzn.to/3DzNjmF
Bosch Edge Guide: amzn.to/2uRRKs2
Bosch Bushings Set: amzn.to/2JUNRYb
Centering Cone: amzn.to/2OjgOAf
MY CNC MACHINES (I highly recommend both)
Bescutter Laser’s Website: bit.ly/bescutter
Avid CNCs of all shapes and sizes: bit.ly/3cdKdqA
----
Camera Gear:
Lumix GH5-s and main lens: amzn.to/2J49F7m
30mm Macro Lens: amzn.to/2GJXtTT
15mm Lens: amzn.to/2NafUox
50mm Lens I use for product shots: amzn.to/2mehs5y
Microphone: amzn.to/2IGjKIa
Lav Microphone: amzn.to/2Nb8SzY
Gimbal: amzn.to/2s9ZV0F
2nd CAMERA Canon 70d: amzn.to/2FiCEDq
Tripod: amzn.to/2HasNvK
Slider: amzn.to/2oNucSd
24MM Wide Angle/Macro Lens: amzn.to/2oSzzjh
50MM f/1.8 for those tight shots: amzn.to/2tpAoVm
10-18mm Lens for the wide shots: amzn.to/2FZrhNM
#jointoftheweek

Опубликовано:

5 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 633

@andyjame1954 7 месяцев назад

The author does like to from scratch, ru-vid.comUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO shaping and trimming wood from large blocks into fine finished products. As another reviewer mentioned, most projects require a lot of high-dollar equipment that most of us don’t have the room or budget for. But, knowing how to do these things, even if we won’t be able to practise the full stack project, is still great.

@alligatormonday6365 4 года назад

As a very new wood worker, watching videos like these are truly inspiring. It was this specific joint that made me go buy my first tools.

@user-rz4ob3xu1u 4 месяца назад

Brother can u tell what is use this half triangle

@AdamCraigOutdoors 5 лет назад

there's tons of beautiful things in the world that aren't practical. Doesn't mean that they aren't cool. You first joint was cool and i liked it!

@katzmosestools 5 лет назад

Thanks bud! I really appreciate it!

@Kkuts37 5 лет назад

Agreed!

@TheMick40767 5 лет назад

Jonathan, I was a producer for Fox sports and later ESPN. Weekly I had to reassure the talent that trolls will be trolls. It’s easy to hide behind a keyboard. It much harder to put yourself out there like you do. Keep up the great work, don’t sweat the small stuff. You are doing a great job.

@shademe 5 лет назад

What a beautiful joint, I can't believe people are so callous. Thank you for sharing both joints with us, I enjoyed the videos!

@markschneider1366 5 лет назад

God gave you the gift of woodworking , glad to see you are using it for teaching others ! Really like the look of this joint ! You outdid yourself !

@katzmosestools 5 лет назад

I really appreciate it bud!

@ryanallthewiser 5 лет назад

Wow wow wow. Awesome Katz!! Should have used your stop block!! Love the simplicity in how you explain tough stuff. Very helpful and encouraging

@dylancochran7830 5 лет назад

This looks amazing. It would be cool if you did a video on how to make a whole box with this technique.

@shaunboydmadethis 5 лет назад

I was questioning all of my decisions over the last couple months after your video last week, but you have redeemed yourself.

@katzmosestools 5 лет назад

Shaun, I was worried about you. Glad you're ok.

@katzmosestools 5 лет назад

@Bryan Hunter #makermate has a ring to it...

@xaytana 5 лет назад

I kinda wanna see that corner carved out of a solid piece of wood. For something that has legs, having a full square beam with the dovetails carved out would be a cool look.

@MyUnquenchableThirst 4 года назад

I totally agree I though that's what it was in the first place.

@rybiesemeyer 4 года назад

You could, but grain orientation matters a LOT in dovetail joinery and you would have a hard time finding stock that would mate properly.

@shawnanroelse5035 3 года назад

The joint design in this link may be better for that. I can envision a square beam being used in it: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-yn6HUdJMAYs.html

@pastorquick9922 4 года назад

You make it look so easy. God bless you my brother!!

@earlfedrick9336 4 года назад

I like people who love what thay do. And you show the pride you put in to it. Beautiful joint.!!!!

@pastorjosh44 5 лет назад

I think that’s the most beautiful joint I’ve ever seen.

@456fly 5 лет назад

Thanks for your humility . Makes me fell like your honest enough to keep watching.

@katzmosestools 5 лет назад

Glad I earned your trust on the internet hahaha

@wwscott7595 5 лет назад

Hello young man. Over my life time (of which is long) I have never seen such clever and beautiful piece of woodwork done mainly by hand. This is why trees are cut down, it allows people like yourselves to use your skills and show joints that people can really push the boat out and take on a challenge. you should take this up full time you are quite good at it. Take care BIG GUY.

@katzmosestools 5 лет назад

Thank you my friend!

@marklongchamps8002 5 лет назад

Your photography is amazing. And so is the joint.

@sleepymarauder4178 Год назад

Taking critique, learning from it and going above and beyond is why I subscribed to you. Amazing work !

@gypsyphil 3 года назад

Absolutely awesome, thank you for making it simple to follow, with good lighting, from the other "Dr. "Phil" !

@TheJmh19 3 года назад

really nice! your joint of the week series is probably my favorite of your video. thanks for the upload.

@yayanono4833 5 лет назад

Hats off for honesty and integrity

@sureshot311 5 лет назад

That is other worldly. It looks incredible. Spline or no spline. Fantastic work.

@michelebenini8125 4 года назад

Really nice job bro!!!👍🏻👍🏻👍🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻

@galamonkey 5 лет назад

Just to mess with everyone, you should have made the same joint as last time... Then used a pocket holes for strength. 😂

@thatguythatdoesstuff7448 5 лет назад

And then dub that the Epic Middle Finger Joint.

@johnmontague69 5 лет назад

Yeah and put a 2x2 in the corner to catch the screws... Just to keep things from coming apart lol 😃

@sailingluana3037 4 года назад

That would be epic. Lol

@steveborch6820 5 лет назад

Wow!! That is beautiful. Last weeks was too. Great inspiration!!

@katzmosestools 5 лет назад

Thank you my friend!

@grahamparsons6620 5 лет назад

I have to say I loved last weeks joint, not sure just how strong a decorative box needs to be I would have thought last weeks joint was strong enough. Of course you then had to go further and my what a beaut of a joint this weeks turned out to be, I still think that lacewood is the star of the piece. 👍👍👍

@katzmosestools 5 лет назад

Thank you my friend!

@woodydellcreations1742 4 года назад

Such a nice touch with the ebony it just really "pops" !!!!

@deathmetaldownhiller7874 4 года назад

I'm new to this, and most of the stuff I watch is overwhelming, but you do a good job of explaining simply by showing. Looks beautiful by the way!

@mikegoldfine9152 5 лет назад

I have to agree with Willy T. Unreinforced miter joints aren't really that weak. I have made many boxes that way over the last 22 years, some that I kept and use frequently in my shop and none have come apart so far. Although I haven't dropped any on a hard floor yet, which might do the trick!

@mikhail2400 5 лет назад

I wish I had your skills with the hand tools but its not some thing that comes over night. Im new to wood working and have learned enough to be extremely impressed with the skills involved using hand tools. Guys like you leave me amazed. Keep up the beautiful work and the great videos.

@katzmosestools 5 лет назад

That means a lot bud. Thank you for your kind words

@mattrinne 5 лет назад

Just when I thought you couldn't get any joint-ier, you go and do something like this... and totally redeem yourself!

@katzmosestools 5 лет назад

hahahahahahahahahahahaha

@johndee1855 4 года назад

Beautiful work

@BYYoseph 4 года назад

Nice joint. I think even a spline across the 90 degree corner centered in each dovetail would look awesome with the right color of woods.

@alexhoskinson4253 5 лет назад

That is incredible. Beautiful joint, and so much detail!

@GunnerAl9 3 года назад

Beautiful job, a lot of manual work and you are very skilled and patient. Awesome!

@kurtk7838 5 лет назад

Way to not act all butt-hurt when addressing fans' issues-- Beautiful joint, I especially like the square-stock spline-- kudos

@katzmosestools 5 лет назад

Thank you my friend hahaha I really appreciate it!

@jamesbarros950 5 лет назад

Brilliant woodwork, great instruction, and humility to boot. Subbed

@javierviera8979 3 года назад

Really beautiful!

@rickybobby6605 5 лет назад

Being a total noob to woodworking, this video is waaay more work and planning than it looks like. He makes it look pretty easy. Awesome looking joint. Thumbs up and definitely sub’d.

@katzmosestools 5 лет назад

Welcome my friend!

@felixfromnebraska8648 4 года назад

Thank you, Jonathan, for your sharing and teaching through these well thought out and professional videos. This one, in particular, hits home with me, as I am building some shadow box picture frames. I wish you were my next-door neighbor so I could visit you often and learn your secrets of fine joinery. These videos make that possible as if I was living next door. Thank you again.

@calebreasons 5 лет назад

I'm not sure that those saying you needed a spline were necessarily "right". You said that very thing in your last video! So I was just watching a talented craftsman have fun with a joint and share that with all of us (for free...ahem)! Thanks for doing what you do! You inspire other craftsmen and craftswomen to go out and try new things, and that's all that matters. The other "experts" in the comments can, well, just keep doing their thing.

@katzmosestools 5 лет назад

Hahahaha thanks Caleb. I totally agree

@shopcatt643 4 года назад

that is really slick looking

@Rogeriorosana 4 года назад

Congratulatio my friend !!! Very very cool your job !

@kappabravomusic2101 4 года назад

wow wow wow. That inlay dovetails looks outstanding! I'm waiting for your 1:6 & 1:8 ratio guides to arrive! Can't wait.

@sailingluana3037 4 года назад

that looks really nice! Could cut 1/8 in slots in the middle of each dovetail, parallel with the tail direction, and put ebony flats in it. Instead of the vertical ebony piece drill it when done and insert brass rod down the side tails and one down the front tails.... That would make a really strong joint and probably look amazing.

@dwlsml4118 4 года назад

You are great at teaching and have a good heart for sharing knowledge. Thanks. Beautiful craftsmanship.

@johnmontague69 5 лет назад

Lovely lamination ☺

@ryanmeloney3421 5 лет назад

I’m new here. I appreciate how you explain the math ect and what exactly you are doing then speed through the process. Don’t need to see another dovetail cut. Well done and thank you

@katzmosestools 5 лет назад

Welcome my friend!

@JkCanvas 5 лет назад

Mind blown with this joint. Thank you for sharing.

@zl9148 5 лет назад

WOW!! THAT IS AWESOME!!

@amdenis 5 лет назад

I find that plenty of glue is essential, as you mentioned (on both sides) and also, using clamps with plenty of pressure to fully bond the inlay. Without the clamps, I have had issues-even with a,lot of glue, but never with the clamps plus plenty of glue.

@pivotalfit 4 года назад

That looks amazing

@paintballbob21 5 лет назад

I've had problems with purpleheart not gluing well because it's an oily wood. Try wiping it down with mineral spirits before gluing next time and see if it stays together better, it's worked for me in the past.

@MrBaza70 3 года назад

Wow! That's a beautiful joint!

@Chidsuey 5 лет назад

It's beautiful. One day I hope to have the skill to put this together. It occurred to me if you really wanted to make a strong joint, though severely lengthen your work time, full blind dovetails in the lacewood would do it.

@emmamegan9717 5 лет назад

i just found *TopFineWoodworking. Com* and the plans on there are so amazingly laid out and well thought i don’t know what I would do without them now

@alejandroferreyra6120 8 месяцев назад

I'm client of you and I follow your fantastic master pieces an learn from you. Congratulations my friend

@mikecurtin9831 5 лет назад

I like that you used lacewood as the backing board at about 9:30. I haven't made a dovetail yet, I just made my first box joint about 3 months ago. When I showed it to a friend, he showed me a box his father had made that had box joints with a different colored dowel pin running vertically. I'll keep working at these. Thanks much. I subscribed and hit thumbs up to crush a troll.

@katzmosestools 5 лет назад

Welcome my friend!

@Leonitus485 Год назад

I love how the sacrificial boards with all these RU-vidrs is one of those most expensive pieces of wood in. The shop. Lol cant wait til I’m at that level.

@MrOwen703 5 лет назад

Yep, totally going to use this joint in my next box! Very cool Johnathan!

@katzmosestools 5 лет назад

It's incredibly rewarding to finish. the middle takes a while hahahaha

@EfrainMcshell 5 лет назад

What a nice work. It is so great to have space, and tools to do things. Things are hell of expensive, specially to rent a space

@peterhkoller 5 лет назад

Unbelievable....... That is absolutely beautiful. The best joint I have ever seen

@hypnoraythompson5824 3 года назад

really nice project

@U2WB 4 года назад

Beautiful !

@bretturner3413 4 года назад

You are very good,nice wood art.

@brad4908 4 года назад

I couldn’t have imagined such a thing. Wonderful.

@rafon. 5 лет назад

Wow, you know what you doing, huh? Michael Scott's "what she said" and end with 360 view of a peice did it for me. Thanks!

@TxStang 5 лет назад

nice looking corner joint , the color contrast is spot on

@katzmosestools 5 лет назад

👊😎

@duin2in 4 года назад

Wow that looks incredible! One day I'd love to attempt this

@commandokiller4651 3 года назад

Very impressive 👍

@twicebittenthasme5545 5 лет назад

It is definitely a gorgeous looking piece of work! Thanks for sharing.

@ronmiller682 5 лет назад

Very nice work

@jeffabercrombie167 4 года назад

Wow screw the haters, spline or no spline, great work, btw the spline didn’t add any difficulty or strength, just looks cool

@flavacreations 4 года назад

Great job 👍

@jonathanlunger2775 4 года назад

You dove tail guys are magicians

@Charlie-pk6lj 5 лет назад

Great job much better, stronger and prettier and yes it takes longer but worth it.

@Pyronics 5 лет назад

Love the Joint! I appreciate your energy and will to transmit your skills. Keep it up.

@katzmosestools 5 лет назад

Thank you Dan I really appreciate it!

@Sly_Wolf_1 5 лет назад

Bloody beautiful, joints 1 and 2. So nice to see hand cut joint, it's a dieing art with all the router jigs out there. Once again nice work, you definitely gained another sub here. 👍

@eddymangas3558 4 года назад

It is amazing and beautiful. Nice job.

@michaelenochs4033 5 лет назад

That was fricken beautiful work man. Absolutely beautiful.

@hurricanearthur9742 4 года назад

Great Job !

@9Biloela99 5 лет назад

Truely incredible

@andrewbrown8148 5 лет назад

JKM, your dovetailing is amazing, splined or otherwise~! I have a project coming up to finally use the dovetail guides I bought from you. Can't wait to get started~!

@katzmosestools 5 лет назад

I can't wait to see what you cerate!

@shanejohnson800 5 лет назад

You are amazing!!! I subscribed I'm pretty new to wood working. and I'm glad I found your channel I hope to learn a lot from your vids!!!!

@salahesmael7688 4 года назад

Nice artistic joint 👍

@RetiredRhetoricalWarhorse 5 лет назад

Splines across the dark dovetails would be even stronger I believe.

@brucemartin5510 5 лет назад

These are beautiful joints. Can't wait to try out my new jigs!

@Ghost_PM11 5 лет назад

That looks beautiful, I have to try it.

@lotharerkens8154 5 лет назад

Beautiful Joint and perfectly executed!

@katzmosestools 5 лет назад

Cheers !

@rogerdudra178 5 лет назад

Nice joint. The ebony spine is awesome and important.

@MarkHolmberg 5 лет назад

This video makes me happy.

@KarCar13 2 года назад

Holy fox creek that’s insanely epic

@thallmeister 5 лет назад

I feel like next week you should do the same thing again, but then use a hidden dovetail miter joint with a butterfly key going lengthwise, and top it off with dovetail splines. After that no one would question it's strength. Very nice joint, good source of inspiration.

@katzmosestools 5 лет назад

Bahahahaha deal

@thallmeister 5 лет назад

@@katzmosestools I got bored and modeled it, because I can't make it out to my shop. It would be a very interesting order of operations to get this done. dl.dropbox.com/s/lrxs7enwt5leirj/Strange%20Dovetail.jpg *edit Crap I forgot the dovetail splines, dangit *edit 2 There we go, looked better with the inlay on the spline as well. dl.dropbox.com/s/d32w0bseau57d1g/Strange%20Dovetail%20Inlay%20Spline.jpg

@whosaidthat5236 5 лет назад

Awesome man! I was one of those that commented about it being a weak joint,The fact you give it another go just got me to subscribe. And didn’t go on some rant about trolls in the comment section. You just did a stronger more beautiful joint with the Purple Heart inlay and a spline.

@desertmulehunter 5 лет назад

Now get over yourself!

@notahotshot 4 года назад

@@desertmulehunter, take your own advice.

@robertsonjc13 4 года назад

You wouldn't have to back pedal your earlier comment if you weren't a hater.

@pdstokes8 5 лет назад

Wow, now that is super cool.

@bobbg9041 4 года назад

HOLD IT STOP THE SHOW! Don't ya have to go to Colorado for the Joint of the Week? This has been a message of High Times!

@browill9 3 года назад

Nice work

@pemtax557 5 лет назад

Yo Jonathan ... really good episode, it looks amazing (and strong). BTW ... just received my 6:1 today from you and am already having a blast with it. It is so easy to use, even I make good cuts with it. Thanks for the quick turnaround time on the order, needless to say, I was extremely anxious to receive it.

@buckmetta 4 года назад

an art indeed

@valterleao6795 4 года назад

Parabéns meu amigo..., aprendi mais uma, adorei a sua ideia, também, você é muito caprichoso, suas habilidades são de espantar! Abraço aqui do Brasil 🇧🇷