Sporterizing the Mosin Nagant Part 6- Finishing up metal work and applying finish

Подписаться 2,7 млн

Просмотров 140 тыс.

50% 1

AMAZON Store: amzn.to/2H7Lq6Y
PATREON: / iv8888
JOIN USCCA LEGAL SELF DEFENSE NETWORK: usccapartners.c...
CHECK OUT OUR MUSIC CHANNEL: / guitarsenal
In this video, we turn down the dovetail on a belt sander to give the barrel a more sporter contour and cleaner lines. We finish things up by applying our Zinc Phosphate to a few metal parts. Other than drilling and tapping for the scope mount, our metal work is done.
DISCLAIMER: Our videos are strictly for documentary, educational, and entertainment purposes only. All shooting is performed on state-approved firing ranges under the supervision of trained professionals. Imitation or the use of any acts depicted in these videos is solely AT YOUR OWN RISK. All work on firearms should be carried out by a licensed individual and all state and federal rules apply to such. We (including RU-vid) will not be held liable for any injury to yourself or damage to your firearms resulting from attempting anything shown in any of our videos. We do not endorse any specific product and this video is not an attempt to sell you a good or service. We are not a gun store and DO NOT sell or deal in firearms. Such a practice is heavily regulated and subject to applicable laws. We DO NOT sell parts, magazines, or firearms. We are not instructing our viewers on how to modify firearms, accessories or otherwise to change their basic legal function. These videos are free to watch and if anyone attempts to charge for this video notify us immediately. By viewing or flagging this video you are acknowledging the above.
Fair Use: In the rare instance we include someone else’s footage it is covered in Fair Use for Documentary and Educational purposes with the intention of driving commentary and allowing freedom of speech.

Опубликовано:

3 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 86

@Mrpracticaltactical 13 лет назад

I think it is importanant to note here that if you are looking for a scout configuration, that part you all are sanding off is a perfect weaver rail and those pin holes are a great way to keep your weaver scout scope mounts from moving on you.

@UltimateCARNUT 14 лет назад

This is a great series! I especially liked the shortening of the barrel and the re-crowning.

@willwood487 14 лет назад

I am almost willing to bet your rifle is going to look 1000 times better than the build I am planning! love the vids man!

@Eagleguts 12 лет назад

I have the neatest Lee. The chunk of steel where the two piece stock butts up is all machined away for a one piece stock,shortened mag etc. etc. Ron

@UrbanTiger74 14 лет назад

Can't wait to see this beast when it's done. Thanks IV8888.

@huntwithairguns 14 лет назад

@MrAnynoumous A "nagant" will usually be about $100. A "Mosin Nagant" on the other hand, can be from $60-$400. Your average 91/30 will be about $100.

@RyeOnHam 12 лет назад

Don't know if it's been said yet, but peening the pins in would have eliminated the gaps in the finished product. The round end of the ball-peen hammer is underrated.

@silentknight2112 14 лет назад

wow this gun has come together nicely sofar looks great cant wait to see 'er in one piece

@metalkrafter1 14 лет назад

Can't wait for the finished rifle.

@ldgrey1963 13 лет назад

That Laminate stock looks very nice. I will look for the other videos to see the progress. Thanks for the video...

@llamalord111 14 лет назад

Sweet I can't wait to see the finished rifle.

@hangemhigh2000 14 лет назад

@SacoreyRugger I MIG welded, you get a hair line crack around it anyway. Maybe with more heat on the barrel like brazing or TIG welding. But like he said, its no big deal.

@jackomo2 13 лет назад

your doing the same thing i am wanting to do but making my own bolt and im using the ati scope mount and ati synthetic stock. Im just using the gun for deer hunting though. i am going to polish the bolt and possibly jewel it. The one thing i really want to do is parkerize it but dont have the equipment and no one around her does it anymore. theyll only teflon coat it and its way outta my price range. Im gonna be 450 bucks in including the price of the gun itself.

@kalliste23 14 лет назад

@Iraqveteran8888 saw another vid where someone removed the sight and used 22mm base rings on that dovetail to mount a scoutscope. Looked pretty neat.

@1anthonybrowning 12 лет назад

@travis199urkul That is what it is called. A bastard file is a file that has the cutting grooves that run in two different directions, instead of them all being running the same direction, parallel.

@SacoreyRugger 14 лет назад

@Iraqveteran8888 when the guy from midway was filling in the locking screw holes on a mauser i think thats what he did, but when he was filling scope holes he did it with a set screw and filed off the head i think, if you wanted to look at midway usa's series on it for some different ideas

@MtnBadger 7 лет назад

No one seems to have mentioned another option,... After installing the pins, turn down the apps and fill it with a might or tight welder, then do your material removal. Will leave a virtually undetectable seam. Just a thought. I do a lot of fabrication so I'm always fixing and repairing with themwelder.

@Tenacious21 14 лет назад

I love these project videos dude! Very very cool.

@joseph299 14 лет назад

Awesome series Eric, I plan on doing something like this later this month. -Joe Brown

@Cbertian 12 лет назад

I am not a gun smith or a machinist, I am however a hobby blacksmith. I was wondering... the rivets for the rear site that didn't fit flush.... could you have secured them from the other side from moving while clamping the barrel firmly into a vise or something.... heat the end of the rivet and peen the hell out of it to fill in the drilled hole better? I make tongs which requires making a rivet and fitting it... that's just what came to mind when I saw this part.

@cwbyfan223 14 лет назад

@TheSouthernGentleman The gun is going to shoot as good as you can shoot it. Putting a scope on it will help you shoot thus improving the "accuracy", but the gun will shoot just as accurate without it.

@grannman 13 лет назад

Great work. Thumbs up.

@bucko504 4 года назад

Way late. But to fill any holes. Glazing pudding or glazing compound. Old welder showed me that trick.

@Kirk1957 13 лет назад

@aerodynamicband You can use a M38 type front sight works the best. Though your barrel would have to be turned down.

@RobertELee420 13 лет назад

@aerodynamicband Uncle Larry has a video showing how to cut in a dovetail by hand on midwayusa's youtube channel.

@Gorbachev 14 лет назад

I'm wondering if you've thought about turning down the barrel shank to remove the markings.

@Sarge101stAirborne 13 лет назад

your vids are awsome man

@kalliste23 14 лет назад

If it mattered to you enough, would you be able to get away with a spot of weld for those holes? TIG maybe?

@AppalachianFreedom 14 лет назад

-- Fantastic work sir. Thank you for sharing!

@howardwmoore 12 лет назад

could you have used solder to fill in your gaps around the pins since you were coating the barrel anyway

@devildroid667 12 лет назад

I would like to see a nice Lee Enfield SMLE 'sporterizied'. I have the chance to buy one that hasn't been in combat to my knowledge, and i'd love to have it set up for my son to use as his first hunting rifle.

@MrAnynoumous 14 лет назад

What is the usual cost of a nagant ? im 16 and will eventually go to college to be a gunsmith, so i am very interested about starting to hone my skills now. your vids have been very informitive thank you

@txstang84 14 лет назад

I don't suppose you've watched any of the Midway videos with Larry Potterfield by chance?

@Deyja666 12 лет назад

When blueing the barrel unit, do you cover up the inner barrel at all? Or do you(or the manufactury doing the job) just spill the chemicals all through the barrel?

@barnabywild2215 Год назад

Why not just fill the gaps with silver solder and polish down?

@Zombieprepper1 12 лет назад

why not plug weld it?all that heat before did all the damage it would do as far as heat goes!

@RobGrayKBMotorsports17g 13 лет назад

Could you fill in those areas with a tack weld if you wanted to without damaging anything?

@ExtraFungus 11 лет назад

Way to rough for my taste. I just did one, I used 1/8 brass rod which is slightly oversized and hammered it in, then I used a Bastard file to round it off. I blued the barrel so you can see the pins but they are attractive looking with no gaps and if I had done duracoat, they would disappear.

@Brockks 12 лет назад

Okay so I understand you used zinc phosphate to give it that nice finish and that is what i would like to do to mine that i am finishing right now. How exactly do you do it and did you just buy some brownells zinc parkerizing? And did you have to tape off the inside of the action so it didn't get finished? Thanks a lot!

@SacoreyRugger 14 лет назад

why not fill the pin holes with a tac weld instead?

@benidefelice 12 лет назад

compliment, bob ross was a painter on tv.

@jewballee 13 лет назад

what did you use on the barrel? i like the way it turned out and am thinking of doing to my own.

@Lvl22nerd 13 лет назад

in my book thats a compliment...

@packbadge 12 лет назад

Hey iraqveteran8888 where did u get the zinc phosphate? Is it Brownells? Also have u ever heard of cerakote gun coating? I just found them because one of my coworkers buy their other powder coating (NIC Industries) for his Harleys that he redoes, you should check them out.

@andybeezyIX 12 лет назад

What grit did you use on the belt sander? I was either going to use a sander or a grinder. I was trying to figure out which would be best.

@mark16443 12 лет назад

if you were really picky what would you fill the rest of the pin holes with?

@Focus1025 12 лет назад

So you said you zinc phosphated the barrel other metal parts.. What exactly is this and how is it done? My mosan has the black finish pealing off and i am thinking about getting all that pealing finish off( i think its called the blueing but not sure" and Installing it in the ati stock.

@JaspaJami 12 лет назад

why not welting those small holes from barrel?

@pontiacmaniac2 13 лет назад

Hey man, love the videos, very informative. I have a New England Westinghouse 1915 model. Will mine have the 3/8 dovetail as well. I wanted to make mine into a scout rifle or somthing of the sort, thanks for the videos and the info.

@wallenba 12 лет назад

Just curious. Would JB weld stay in those holes after firing?

@Eudolus 13 лет назад

how many inches is the sight base on the mosin 91/30? i was thinking of getting a 3/8 to picatinny adapter for it and was just wondering so i make sure to get the proper length one.

@brandonjohnson6645 8 лет назад

Was that your gunsmith boss in the last vid that cut the barrel

@TheCraftedMine 3 года назад

This is the reason why mosins cost $300 now

@joshuaturner4178 3 года назад

Where can you find that crowning set I’ve looked and can’t seem to find it

@Thetdgross89 12 лет назад

What finish did you do on this barrel? Is that parkerizing? Anyone have a good place to send it to have this done?

@frechproff 12 лет назад

you should have filled the holes with weld, not the pins

@soapy05 13 лет назад

When parkerizing a barrel, how do you keep the inside from getting parkerized? earplugs? wax?

@BikerTrashWolf 13 лет назад

@InvictusUnited No he is not. I have not seen a single happy little tree in any videos. ;)

@katiebug610 11 лет назад

i cant believe you heated up that barrel horizantally, you have no bussiness gunsmithing

@myownspiritlevel 12 лет назад

Does anyone have any concerns about the potential weak spots created by grinding off the dovetail and the two retaining pin holes?

@markgoulette1494 3 года назад

I have 9 Mosins, no way would I let that moron with the torch touch any of them . No way he had to get that sight base red hot to get it off. Just hope he didn't ruin that barrel.

@lucasbradley4814 9 лет назад

How hard is it to grind off that dovetail?

@omgiTsmeJon 13 лет назад

@Mauser2012 why cant you wait just 50 years?

@modtuts101 14 лет назад

what is the best place to buy some surplus 7.62x54r

@xxtruckin93xx 13 лет назад

my sights dony have the 2 pins

@TylerLL2112 13 лет назад

@InvictusUnited why did i think the same thing

@krazypolak1820 8 лет назад

What was the crown tool size. 1/2. Or 3/4. Any body. Please

@soloban81 14 лет назад

@InvictusUnited Only if he Duracoats on some Happy Little trees when he is done.

@Nashvegasan 11 лет назад

I could see that, only in the artistic form though.... I think Bob probably smoked more weed before his videos lol

@dingdongdilly 11 лет назад

is it possible to keep the dovetail and put a dovetail - weaver converter? im wanting to outfit my mosin with something that would give me better options as far as optics go.