Spotlight on the Aquatec Booster Pump Kit | BRStv

BRStv - Saltwater Aquariums & Reef Tanks

Подписаться 306 тыс.

Просмотров 63 тыс.

50% 1

Today on BRStv Spotlight Randy walks us through an in-depth look at the Aquatec Booster Pump Kit and discusses everything from how to tell if you need one, to getting one installed and fine-tuned for your RODI unit!
Are you in need of a little boosting? Find the kit here!
brs.li/Booster_...
In this video we’re showing you the ins and outs of the Aquatec Booster Pump Kit and help you decide if you need one for your RODI unit! Our goal is to get beyond the bullet points on the packaging and show you what this gear is all about!
Legal Stuff
The purpose and content of this video is to provide general information regarding the products and their applications as presented in the video. Aquatic sales solutions, inc. And its officers, directors, employees and agents disclaim all express or implied warranties, in any way, related to the products and their application as presented in this video, make no representation or warranty regarding the products and the application as presented in this video and shall not be liable for any direct or indirect losses or damages of any type, including but not limited to punitive damages, or from personal injury or death resulting from or in any manner related to the video, and the products in and contents of the video. The viewer expressly agrees that aquatic sales solutions, inc. And its officers, directors, employees and agents shall not be liable for any damages or losses related to the products in and content of the video and hereby agrees to hold the foregoing harmless from any such losses or damages.

Опубликовано:

28 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 30

@gewglesux 7 лет назад

And to think.... I started with One Betta and One GOLDFISH. Thanks always great information.

@tsurro8086 7 лет назад

Doesn’t the pump have a dial to adjust the out going pressure?

@serenabowman2214 7 лет назад

I'm a fan of brs on RU-vid but I can honestly say I'm enjoying this channel a lot more now your hosting it 👌

@cesar68033 4 года назад

My pressure switch doesn’t seem to turn off my pump

@zeta044 7 лет назад

Right now my pressure is at 60 on my 150 gpd water saver ro/di. Should I boost it or with the booster increase the pressure too much?

@npvids 3 года назад

Thanks for the video. Is there a way to adjust the pressure switch to shut off at 60 PSI instead of 40 PSI?

@BRStv 3 года назад

This particular pressure switch is pre-set to trigger at 40 psi, but is adjustable from 30-60 psi. There is an extremely small set screw on top of the pressure switch if you need to make an adjustment.

@courtneyschultz128 4 года назад

My 500 gallon collection vat is fed by a 75 GPD RO/DI system. I recently switched out the filters and emptied the collection vat which resulting in a massive drop in pressure- 15psi- so the RO/DI system is only producing 20 gallons per day. I installed a pressure pump and pressure switch in hopes that it would raise the pressure to atleast 40psi... but it didn’t work. After I installed the booster pump and switch- the pressure didn’t change at all... This problem is putting a massive dent in my water changing schedule... I’ve been looking at purchasing a pre-pressurized water storage tank- would that help pressurize the 500 gallon vat? I’ve pressurized a 100 gallon collection vat with a bike valve and bike pump before- would this option work for the 500 gallon collection vat? Any advice would be greatly appreciated!

@Ivanaguilar6661 7 лет назад

With the 6 stage rodi unit what would be a good psi to keep it at?

@lawilsonjr50 3 года назад

Where does the wire on the switch go

@BRStv 3 года назад

there is a y cable that it'll attach to. The connectors are all set up so that you can't wire it backwards.

@brainwashed7244 Год назад

This is why you got so many dislikes you're going way too fast you're explaining one thing and then jump into another in the middle of the explanation before going to the next step I don't know if this video is meant to confuse people but you're doing a good job at it and the dislikes show it, you need to simply show where to connect the line going into the pump from the pump to the RO system and then simply show where to connect the pressure switch that's it worry about everything else after the first explanation is done very confusing and very frustrating

@manuelvenegas4737 Месяц назад

could these pumps be used to increase pressure and flow on a regular water filter?

@6figuredetailer709 7 лет назад

Is anybody else nervous about the brs 160. I haven’t seen any updates since the Triton conversion. Hope nothing went wrong

@6figuredetailer709 7 лет назад

BulkReefSupplyCom oh okay awsome

@heemeyschleemey 7 лет назад

I know its kind of off topic but I was wondering if y'all had anything related to taking care of decorative sponges on your channel, I've been looking and cant quite seem to find much info about them online besides a few forum threads and some extremely outdated yt videos and I've always loved filter feeding animals and wanted to try keeping them in my tank but don't want to do it incorrectly cause I hate seeing things die cause I did something wrong. If y'all don't is it something y'all would consider covering since yall are my favorite source of aquarium knowledge? (hint hint brs160 hint hint)

@bruce3579 3 года назад

Our az water outside phx is 500+ tds and at 12psi 😂

@BRStv 3 года назад

Yikes!

@jeanzogheib717 Год назад

Hi, i m having problems with my RO, i installed a booster pump , i installed a high pressure switch at the end right before the needle valve and the floater, now when i plug the hps it shuts off and if i remove one plug from it it works, my second problem is that i have no pressure on the pressure valve, i need help pls before the maple syrup season starts, thank you

@joshbroadbent2341 5 лет назад

What kind of connections are holding the tubing to the wall? (0.13 sec, white clip on wall to the far left)

@brent1311 Год назад

Would this be the same setup if you have a storage tank?

@The.MrFish 7 лет назад

PLEEEEEEEAAASSE START SHIPPING TO AUSTRALIA!!!

@UnrealApe 2 года назад

Is there anyway to get debris out of my pump if it sucked some up?

@BRStv 2 года назад

The 8800 booster pump isn't user serviceable, so unfortunately, no.

@UnrealApe 2 года назад

@@BRStv ok thanks, I just opened it myself, cleaned the debris. closed it back up, reprimed it, and its working great. cheers.

@ericj5916 7 лет назад

I have city water treated with chlorine and is very hard, what rodi unit should I get?

@ericj5916 7 лет назад

Thanks

@LucidComposureUk 7 лет назад

Randy, do all booster pumps come adjustable? I have a D-D one on my source water of about 30PSI and it only takes it up to about 40 through the pump. If so, how is this done? Thanks, great video.

@LucidComposureUk 7 лет назад

Thanks for clarifying! :)

@brainwashed7244 Год назад

diagram !!!! way to fast