Hi wags been watching your videos for 6 years always great advice, thanks to you I’ve been cleaning windows successfully and have a thriving wee business, I do use vision2 only had a few complaints but blame filthy vents frames and Georgia bars are a nightmare to stop dirty runs and spotting, only lost a couple of customers but usually an explanation to new customers about risk of spotting and runs from frames and an offer of free return to stay on top of first cleans is answer to happy clients. Thanks again my success is your training.
Nearly at 6,000 subscribers Chris! Great advice, people can learn a hell of a lot from you, I learned so much from you which I have taken into my business 😁
I've been cleaning with wfp for nearly 20yrs and what wagga says here is bang on. Cleaned up to 18ppm with no issues but like to keep it 0-5 as it rinses better as wagga said. Main problem is guys not rinsing glass enough I've found over the years, and pencil jets I've found work much better than fan, i honestly cant remember the last time i had a complaint off a customer. Don't blame the tools.
Good advice Chris. I'm really against adding anything to my pure water like Vision. For one, I don't think it really works and two, after spending all that money to get my water to be pure the last thing I wanna do is start adding chemicals into my tank lol. Just Pure works fine.
I saw a guy demo'ing washing cars in the sun and he gave the wet car a spritz with a chemical, let it dry under the sun and there were no water spots. I know it seems crazy, but it's pretty amazing to see. Here it is: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-tzLlo3ySIrs.html
I had a problem when I first started but I saw a video of your where you brush the bar between the top fan lights and the main pane of glass this seemed to stop runs for me and helped a lot with this thing if I had water run over pvc then on the glass it. Always became a run even with 000 TDs developed by rinse technique that fits my work however some old style frames seem to always be a problem on a few houses so I just liquidate them after the wash I think I over due the rinse but better for peace of mind
Video genial!!! Necesito cepillo para limpiar en altura con agua pura, que cepillo me recomiendas y donde comprarlo? Unger, streamline no por favor... Saludos!!
Much of the problem lies with upvc frames as they age they produce a white powdery substance (run your finger down one it will invariably come up white) My solution.,try not to dislodge from top railing and middle bar by being more precise,and rinse thoroughly
Just purchased some new streamline brushes and I find that the pencil jets push the water out at too high a pressure causing splashing. Can you recommend a good compatible pencil jet with good flow but less pressure?
My method is 45 on flow. Scrub quick rinse on frames and glass . Do another window or two so first window drips down then second rinse on glass only. Never get spotting
love your videos, been watching them since i started window cleaning. just a comment, it is usually the volume of water not the pressure. i see a lot of people using 100 psi pumps, i use 60 or 70 psi and have a presuure regulator that is set to about 40 psi which is more than enough to run 2 constructor brushes each using about 150 feet of rhino tube. the pumps i use are 2.2 gallons per miinute the regulator allows any excess water to flow back into the tank if the pressure setting is reached. alternately i have used the same pumps to run single poles without a pressure regulator bit that case i use an inexpensive motor speed controller to reduce the pump speed and thereby reducing the volume of water till i have the flow i want.
