SPRAY Paint Your Car (At Home) With Professional Results + (Tips & Tricks)

Подписаться 45 тыс.

Просмотров 471 тыс.

50% 1

In this video I show how to use rust-oleums turbo can to spray the bed side of my 1972 c/10.This can will throw down the paint pretty heavy so be careful when using this product. I share a ton of tips and tricks that I've learned over the 20+ years in the custom restoration world. I hope y'all enjoyed this video and maybe it helped answer any questions that you may have had. Ill link all the products below that were used in this video. These links are amazon affiliate links that don't cost you any extra to use. I make a small percentage off of qualified purchases. Make sure you like, subscribe and share with your friends!!!!
Paint Shaker 4000 Video Link • Video
Links Below
My Website to buy Shirts www.acdesignsgarage.com
My PO Box Below:
PO Box #782 Troutman NC 28166
Rust-oleum turbo can amzn.to/3UBsYbZ
Mineral spirits Paint Thinner amzn.to/3PXPh94
Red Scotch Brite amzn.to/4aGRdeb
Sprayway Glass Cleaner kit amzn.to/4aMaWt1
3m Mask amzn.to/4a0zrmk
HOSE CLAMP amzn.to/48EO2C8
Sawzall Blade amzn.to/3P6A2ua
Sawzall amzn.to/4bYG7Cv
isopropyl alcohol amzn.to/3WdGPGM
Scott shop towels amzn.to/4demzuG
tac cloth amzn.to/4bgdFv4
3m 233+ 1 1/2" tape amzn.to/3wcdfGW
12 inch masking paper amzn.to/4dhJO75

Опубликовано:

14 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 441

@DanOne1513 5 месяцев назад

Professional painters can appreciate how effective this actually was... I professionally painted for years and around several great painters and can appreciate the very inexpensive results here and the ease involved...thumbs up on this one for sure!

@ACDesignsGarage 5 месяцев назад

Thank you for watching!!!

@Mr.Wongburger 5 месяцев назад

2k clear please. For those of us looking to have a longer lasting coat. I think warming the cans prior to laying a cost down will help with reducing the orange peel effect. The prep is obviously the biggest factor in getting a decent job with spray cans. It will. Always come down to time spent before and after with the rattle can job. But you can achieve a good paint job. The 2k clear will help it last, but again you're going to have to put the work in to make it smooth and presentable. Thank you for taking the time to put this video together.

@ACDesignsGarage 5 месяцев назад

Thank you, im shooting for this week on the 2k alot depends on the weather, thanks for the tips and for watching!!!!

@theshark2804 2 месяца назад

Ive had bad results with 2k over rattle can.

@thomasworley1397 2 месяца назад

@@theshark2804Hey man. I’m planning on using the turbo can on my old civic this week. Do you have a recommendation on the exact brand of clear coat to use

@theshark2804 2 месяца назад

@@thomasworley1397 i dont. But might want to test a small area 1st

@mikehagan6576 Месяц назад

I use to do rattle can paint jobs on my 52 ford pickup. Back when we had truck auto paint in cans. No clear coat required fan spray like a paint gun and only 4.99 a can. Last for years. Aw the good old days

@perryamicangelo4008 4 месяца назад

Thanks for taking the time to show us about this paint ! The local body shop wanted 9 thousand to paint my 4 door 86 Cutlass, wow! I'm 67 years old and remember how it was like everything else....My plans are flat black Turbo spray, matte finish should be more forgiving...excellent video, just like your my neighbor walk down the block and showing me in person. Subscribed ......!

@ACDesignsGarage 4 месяца назад

Thank you very much for watching, so glad I could help. Good luck on your cutlass, I love that body style!!

@michaeldamulis9942 2 месяца назад

I’m sure this process would be a little easier if I can understand what this gentleman is saying

@briansawdo6245 5 месяцев назад

Thank you for not rushing through. We need to hear about taping and the right type of materials. When I get to this point I want to try this type of paint job.

@ACDesignsGarage 5 месяцев назад

Thank you, I enjoy sharing what took 20 years to learn and sharing with friends!!!!

@vetteman95 5 месяцев назад

I can remember seeing factory paint jobs from late 50's to early 60's that didn't look any better then what you've done here!!

@ACDesignsGarage 5 месяцев назад

Hahaha thank you, were gonna make it look better this week!!!

@michaeldietz3362 4 месяца назад

You must have dementia

@michaeldietz3362 4 месяца назад

It is kinda cool bro!! And I definitely want to buy 2 can shakers that's brilliant!! Nice invention!!

@cjones32853 Месяц назад

Years ago, my dad, brother-in-law and I painted a ‘51 International long bed step side pickup with spray cans. It turned out great!

@ACDesignsGarage Месяц назад

I think its cool to be able to paint with spray cans, I've painted with 1500.00 spray guns and it's not as fun lol

@Pepelsx416 2 месяца назад

I love the step-by-step the way you did everything I will be attempting to paint my truck just the way you did

@ACDesignsGarage 2 месяца назад

Awesome thank you, good luck!!

@iamburl2667 Месяц назад

Love your teaching, so down to earth, no big fancy detail, sir your awesome

@ACDesignsGarage Месяц назад

Thank you very much!!!

@spoolinM550i 4 месяца назад

Thank you for sharing. I want to learn to paint so bad. I'm a Disabled Vet. and I would really love to be able to supplement my (embarrassingly low income LOL) by painting I have been into cars since I was a teen and here I am now at 52 years old and still have a genuine interest in cars and racing Ive built drag cars and raced them My disability will not affect my ability to do the job I hope The only way to know for sure is to just try. I'm sure I would be much slower than most people but I don't see that as a bad thing. I mean to be able to step back and look at your project and know that I took this car from basically a piece of crap to something you can really be proud of. I mean the satisfaction you must feel from a job well done is a feeling I have not felt in a very long time. Again Thank you for sharing your gift with us

@ACDesignsGarage 4 месяца назад

First off, thank you very much for your service!!!! I can under stand wanting to start a lil side hustle! I love to see people wanting to learn a new trade, Painting and body work is not that hard to learn as long as you know a few steps. As for you being slower than most, you'll be better off. Most people are all ways in a hurry and hurry is the down fall to great body work.Body work has helped me through some tough times, being laid off several times you can make some good side money. Actually you can make as much as you want to lol. I'm planning on starting a new video seris taking a pannel from dented to sanded and buffed with all the info you'll need to pull ut off! Make sure to subscribe so you'll get the notification. Also go over to my website and subscribe to my email list and ill shoot out the notification there.www.acdesignsgarage.com, if you have anymore questions you can email me there or comment here, thanks for the support God Bless!!!

@robertcabral1366 4 месяца назад

Super nice coming out of a paint can!!! I am going out to by can of this stuff for my next project. Thanks for showing me this product, and explaining it...

@ACDesignsGarage 4 месяца назад

Thank you for watching!!!!!

@jeffreysmith3704 5 месяцев назад

Thanks for sharing your tips and tricks with us! This gives me a lot of ideas for some paint jobs I see in my future.

@ACDesignsGarage 5 месяцев назад

Thanks for watching, glad it helped

@shogunMR Месяц назад

Bro you're awesome the clear directions and a little humor in there as well 😁. I'm going to try this

@ACDesignsGarage Месяц назад

Hahaha thank you, it's pretty amazing how it turns out!!!!

@dreamingcode Месяц назад

Im enjoying all your content including the dialog. I like you use music in your videos sparingly. Its like hanging out with an Uncle. Years later you realized you learned alot

@ACDesignsGarage Месяц назад

I really appreciate that!!!!!

@66chevelle1 5 месяцев назад

It would be cool if you did one side like this with a cut and buff then the other bedside one coat with 2k clear. Then do monthly reviews until you build the truck. Would make a great comparison.

@ACDesignsGarage 5 месяцев назад

Thats a great idea, i may try that!!!!

@bennettbritton4029 5 месяцев назад

I second this also!

@josephbragg1162 5 месяцев назад

That was funny, I always say fungus amongus 😂. Great video and I've watched a couple with this can and I just cannot believe how wide that spray pattern is and how fast it covers. They are definitely onto something especially for people on a budget and want to save a few bucks and get a job done quicker.

@ACDesignsGarage 5 месяцев назад

Hahaha there pretty awesome, thank you for watching!!!

@LadisMiranda-gb1jw 2 месяца назад

Thanks for the video. That came out looking great! Very cool Sir. I'm going to give it a shot on my Subaru.

@ACDesignsGarage Месяц назад

Awesome thank you for watching!!

@mikehagan6576 Месяц назад

Thanks for the great video. You are a very good teacher, we appreciate it, God bless 🙌

@ACDesignsGarage Месяц назад

Thank you very much, hope you have a Blessed day!!!!

@ronaldmiller2740 3 месяца назад

THANKS FOR THE TIPS AND VIDEO!!!!,, FIRST TIME WATCHING.. PEACE!!

@ACDesignsGarage 3 месяца назад

Thank you for watching!!!

@HandFromCoffin 3 дня назад

Wow.. I'm fixing a truck that was gifted to me and saw those cans in the store. That thing is crazy.

@ACDesignsGarage 4 часа назад

There pretty fun to use!!!

@donb1842 2 месяца назад

I've used this on my hunting truck and a couple of friend's hunting vehicles also...my nickels worth of free advice..two coats,with the first coat being very light with only a 25% overlay..second coat a little heavier(walking the vehicle) with at least 50% overlay(no more than 16 inches away either coat..just slow your walk a little on the second).Leaves very little "orange peel" or runs. Those Turbo cans really dump it out! lol On my truck I did do a good sanding first and "pre painted" the gaps and hard to reach areas with a regular spray can because those areas tend to run with the Turbos,due to paint build up.I only wish RustoLeum made it in more colors! (I do have painting experience from my younger years)

@ACDesignsGarage 2 месяца назад

Thank you for the tip!!

@lawrenceshea1932 3 месяца назад

Lol ! Your spray can Shaker is so awesome! 😃

@ACDesignsGarage 3 месяца назад

Hahahaha thank you!!!!

@martinbowers852 5 месяцев назад

that was a lot of work to show us how to do that, thank you for that

@ACDesignsGarage 5 месяцев назад

Thanks for watching, I shot the cut and buff video this week it turned out awesome, like glass, it will go up Friday or Saturday this week!!

@andriyahbenysrayl5676 4 месяца назад

I think this is a pretty good paint job, especially since it was done in an outdoor backyard.

@ACDesignsGarage 4 месяца назад

Thank you!!!!!

@rtkracht 5 месяцев назад

Holy sh$t! Please excuse the language but that first pass was simply amazing. Unbelievable actually. Thanks for sharing. Can’t believe a rattle can produced such good results and as always thanks for sharing your skills and expertise. -- clear --

@ACDesignsGarage 5 месяцев назад

Hahahaha yeah when I put the 2nd coat I was like Crap!!!!! But it needed it to sand down. I sprayed that first coat and it was awesome 👌

@wrigleyfield9042 5 месяцев назад

I thoroughly enjoyed your video. All kinds of tips and tricks learned. Would like to see you add a couple layers of clear coat now. I have a question though. If you were to clear coat over the paint at this point (with all of the orange peel), would you have to sand the paint first, or will the clear hide the orange peel? Thanks again for the video. You've made a subscriber out of me.

@ACDesignsGarage 5 месяцев назад

Thank you for watching!! I usually sand it flat with 600 wet after it dried real good and it will lay out pretty slick, a good high solids clear will fill pretty good but you still need to sand it so it will adhere. Yhis weeks video is gonna be wet sand and buffing the pannel, then next week im gonna scuff it then were gonna use the spraymax spray paint 2k clear and make it look like a show car "hopefully " lol. I want to make several lessons so I can help as many people as possible!!!!

@stuck1000 5 месяцев назад

Great tips as always, man. Love the channel. Turbo cans are great. If Rusto ever gets them to spray as finely as regular cans, then they'll really be a game changer. Also, I'm glad you gave the tips about spraying rattle cans and going heavier. My stuff would come out dusty and streaky when I did light coats. Gotta be like a graffiti artist and coat it fully, runs be damned. Be well.

@ACDesignsGarage 5 месяцев назад

Hahaha thank you, I 100% agree if they would use a smaller hole in the tip where it would be a finer mist, they would be perfect!!!! Thanks for watching!!!

@michaelbahta8610 5 месяцев назад

Talk about highly intellectual n simultaneously pro's keep on going . . .

@ACDesignsGarage 5 месяцев назад

Thank you!!!

@johnelliott7375 5 месяцев назад

The first coat looked really good if it was covered to the point that you could not be able to see it I would have liked how shiny it was. I'm a fan of red though, I hope you have a great day and enjoy your weekend. God bless you and your family also.

@ACDesignsGarage 5 месяцев назад

Yeah I loved the first coat, then I steped back and saw light spots so I had to do another. That stuff does not like 2 coats lol thanks for watching, yall have a Blessed day 🙏

@johnelliott7375 5 месяцев назад

@@ACDesignsGarage Have a great Sunday

@danrussell3439 3 месяца назад

@@ACDesignsGarage in my experience the 2nd coat problems normally are due to the time between coats. Either painting the 2 coat too soon or waiting too long. If doing it the same day. My best pain job, I waited 7-10 day between each coat . Project took a month 3 coats and a gloss coat.

@jamesgarcia6292 3 месяца назад

Good evening sir Im from Texas u mentioned u were in Texas im in Grand Prairie just outside of Dallas wondering if u could recommend anybody that wont charge me an arm and leg but does honest work as yourself its a1995 chevy silverado single cab great condition!? Enjoyed the vid especially the love and attention to detail for ur craft..God Bless!!

@ACDesignsGarage 2 месяца назад

Thank you, I live in NC but I was in Austin back in April for the lone star round up

@lonneykearl9174 2 дня назад

Painted my car with rust olem turbo used the white was supprised the way it turned out showed it to a few friends they couldnt believe it

@ACDesignsGarage 4 часа назад

I bet it looked awesome!

@Pendragon69608 Месяц назад

BROTHERRR THAT SHAKE 4 THOUSAND IS STUPID GOOD I LOVE IT

@ACDesignsGarage Месяц назад

Awesome Thank you!!!!!

@erniekeck5823 5 месяцев назад

That's pretty cool he welded a Sawzall blade to that sheet metal years ago I took a Sawzall blade drilled 2 holes in it screwed it to aluminum drink / bottle holder intended for a bicycle. Then used a hose clamp with the plastic wing nut on it to tightin it on the can so it don't go flying as soon as you hit the button on the saw but be prepared for your arms to itch an tingle after using it cause it will shake your blood around in them veins of yours 😆

@ACDesignsGarage 5 месяцев назад

Man thats awesome idea, i made a video on building one from scratch a few weeks ago, that bottle idea is brilliant!!!

@natebosworth6634 5 месяцев назад

They make a 1k turbo clear. It holds the gloss and lasts decent. Ive used the white on a delivery truck about 4 years ago.

@ACDesignsGarage 5 месяцев назад

Awesome I haven't seen that yet in my area!

@neilmanahon1485 4 месяца назад

Straight to the point. Thank you!!

@ACDesignsGarage 4 месяца назад

Thank you for watching!!!

@briananderson4552 5 месяцев назад

Don't go blaming me for your tinkering.....glad ya decided to film and post it tho ....😊

@kajbyman3006 4 месяца назад

Amazing job.Have been working with cars since 1985,but have never seen such a good result with a spraybox.Unfortunately that paint can't probably not been ordered to Europe,due to our stupid laws..Thanks for the video👍

@ACDesignsGarage 4 месяца назад

Man that stinks, can you get the regular smaller cans? I'm gonna do a video with them soon and we're gonna strive to make it show car quality!!!

@michaeldietz3362 4 месяца назад

You never seen it cause knowbody would be that stupid to put it on anytbing

@michaeldietz3362 4 месяца назад

What???

@BigpopaKN18761 5 месяцев назад

Hey, thanks man. I’ve been looking for channel that could show me the basics of stuff. I did the bodywork on my truck. Surprise me how Well it looks. I am getting ready to paint but I’m a little unsure on what would be the best primer to set up the paint,so the paint don’t peel off because I use the wrong primer.

@ACDesignsGarage 4 месяца назад

If there is alot of bare steel, I'd use an epoxy primer, if it's just paint and body work you can't go wrong with a 2k primer filler. It builds up pretty thick and will help fill in small imperfections.

@BigpopaKN18761 4 месяца назад

@@ACDesignsGarage thanks man. I have a light coat primer over at the moment. Keep it from rusting but I was planning on sanding that off so that helps me out. I appreciate that.

@csorrows 4 месяца назад

Jesus, that can lays some paint. I was not expecting it to go down so freaking quick.

@ACDesignsGarage 4 месяца назад

It puts it down like a water hose lol, almost comical lol

@717273mopar 5 месяцев назад

Great Video, Thanks for the great tips.

@ACDesignsGarage 5 месяцев назад

Thank you for watching!!!!

@tammiroy0 5 месяцев назад

Well I'm glad you tested it so therefore I will know to try to make one good passing without running the paint because if I try to make a second passing it's going to Orange Peel like crazy thank you for your video and your info do appreciate it 👍

@ACDesignsGarage 5 месяцев назад

Thank you, I think if I'd of held the can back a lil futher it probably would of been a lil smother!!!

@peepeegodken2725 Месяц назад

I have chrome i want to get rid of, and some surface rust how do i proceed with this? Would love to hear your opinion and your paint job came out amazing 🤘🏽

@ACDesignsGarage Месяц назад

Thank you!!! I would probably sand it down with 80 grit till there are no flaks and rust. Then get you some direct to metal epoxy primer, as soon as that tacs put 3 coats of high build primer and let that dry. Then block it with 180 till flat then 320 grit , then finish up with 400 wet then paint. She'll look like glass lol

@Trendsetta68 4 месяца назад

Awesomeness, thanks for the tips and video! GOD Bless ! 😇👍🏼

@ACDesignsGarage 4 месяца назад

Thank you very much, have a Blessed day!!!!!!

@lawrenceshea1932 3 месяца назад

Pretty dang nice on the 1st coat. But, seeing it is only Enamel paint, what's the plan to seal it up ( clear coat ? ) to make it as hard & long lasting as Urethane paint ?

@ACDesignsGarage 3 месяца назад

Yes I have a video on applying 2k clear and wet sand and buffed like a show car!!!

@lawrenceshea1932 3 месяца назад

@@ACDesignsGarage very cool !

@Ben-rj7xs 5 месяцев назад

I've been waiting for them to come out with a spray can that does this now they need to come out with a kit of tips that can be changed for the spray you want. I think it does a pretty good job for a can

@ACDesignsGarage 5 месяцев назад

That would be awesome if they had different tips!!!!

@doughaven-rf8id 5 месяцев назад

Rust-oleum has a 5 in 1 can that you can dial different spray patterns. Kevin Tetz from Paintucation used that to rattle can a bike tank in one of his videos.

@rayrudd5340 26 дней назад

I had the same thing issues! These. Turbo cans. Take some getting use to.

@ACDesignsGarage 21 день назад

That's for sure, but there fun lol

@Bryon-p4k 2 месяца назад

Would like to see videos of you cutting and buffing spray paint

@ACDesignsGarage 2 месяца назад

Here it is I hope it helps !!! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-fqGtOnILqwc.htmlsi=gWPY8DxdTaIXlOMX

@matthewmc4363 3 месяца назад

Like you a lot. Love your hustle.

@ACDesignsGarage 3 месяца назад

Thank you very much!!!!

@iNtRoVeRsIoNaLiSm 4 месяца назад

bro, that shaker contraption is bad ass!

@ACDesignsGarage 4 месяца назад

Thank you, it's fun to use to hahahaha I have some going up on my website again this week www.acdesignsgarage.com, I'm slow because I'm the only one making them hahahaha

@elsey1976 5 месяцев назад

You would've gotten way less orange peel if you had placed the paint can in a bucket of hot water for about 10 minutes.

@ACDesignsGarage 5 месяцев назад

I need to try that thanks!!!

@metalhalide4043 20 дней назад

Great work, can I use the Red Scotch Brite to prep surface for clear coat only?

@ACDesignsGarage 19 дней назад

That may be a little coarse its like 350 grit, I would suggest 600 to 800 if your just shooting clear, if your shooting a solid color base then clear you can use the red scotch brite. If you have a pratice place to do it try it out, it may work, im just not 100% positive!!!

@metalhalide4043 17 дней назад

@@ACDesignsGarage Many painters on YT saying to use 320-400 grit for best paint adhesion, the higher the grit the higher the chance of delamination..

@colesheperd1165 4 месяца назад

Love your video brother thanks im new to painting.

@ACDesignsGarage 4 месяца назад

Thank you for watching, I hope I can Help!!!

@camcutcnc 4 месяца назад

Hell yeah, lets see the color sand and buff !!

@superhawk20002 5 месяцев назад

Waiting for the cut and buff video. I'm ready with the turbo cans and all the supplies to do a foxbody hood and doors.

@ACDesignsGarage 5 месяцев назад

It goes live at 7pm est today, If you use the turbo id hold it back about 15 inches away so you dont get as bad of orange peel as I did, just a lil helpful tip maybe save you some time sanding!!!! Were gonna do clear coat next week!!!

@thomasworley1397 2 месяца назад

After sanding, would it be better to add a layer of primer, then paint. Or just paint right after sanding. Thanks

@ACDesignsGarage 2 месяца назад

It would be, If it was base clear job I would shoot a coat of sealer before the base to seal it up!!!

@1hunglo Месяц назад

I like that. I know now what I'm going to do to my old 83 F100, as far as painting it. Black it is....will be. 😂

@ACDesignsGarage Месяц назад

Awesome I love those years of those trucks!!!

@losgarciasadventures1496 4 месяца назад

I lay rattle can early in the morning sunrise 6am when its nice and cool, 4 coats at 5 mins between each coat and get mirror finish. I never clear because i change the paint every year for fun, rustoleum stays shiny for 1yr before it begins to fade away.

@ACDesignsGarage 4 месяца назад

I will say the early morning is the tip for bugs and being cooler!!!

@rudyflores9395 5 месяцев назад

Kool video can't wait for the cut & buff are those slotted mags in the bed ???

@ACDesignsGarage 5 месяцев назад

Yes they are good eye!!!

@rudyflores9395 5 месяцев назад

@@ACDesignsGarage thanks don't get rid of them sir

@JamesSmith-hx3lp 5 месяцев назад

Great video! Looking forward to cut buff and clear coat.

@ACDesignsGarage 5 месяцев назад

Thank you, the cut and buff will be this weekends video, just shot it!!!

@ZaZaKushulia 2 месяца назад

I remember when I was about 14 i spray painted my bike and it flaked like crazy I didn’t know about the sanding to make the color stick I just painted over the clear coat

@ACDesignsGarage 2 месяца назад

I use to do the same thing. They have some awesome flake in the can now!!!

@johndoe1765 4 месяца назад

Thanks I learned a lot GOD BLESS and take care until next time.

@ACDesignsGarage 4 месяца назад

Thank you very much, hope you have a Blessed day!!!!

@Akaya3511 3 месяца назад

Are you able to let it dry. Wet sand it smooth. Then apply a few coats of 2k clear? If so it could look super nice and last a long time.

@ACDesignsGarage 3 месяца назад

Yes you can just make sure its completely hardened. I only had time to do it in one day!!!

@cheeseheadfiddle 14 дней назад

Would you say that a paint job will last longer the farther north you live? I know paint fails quick in Arizona and New Mexico.

@ACDesignsGarage 9 дней назад

With a 2k spraymax clear I think it will hold up pretty well as long as it has UV in it. Now just bare gloss black turbo can will hold up about 6 months till it starts to fade but it will buff out!!

@mikeburns3147 2 месяца назад

I'LL GI YOU A THUMBS UP I MADE MY LIVING AS A UTO PAINTER made a good living 53:16 it's not easy painting at home good job im retired now because of throat cancer be safe & keep up the good work

@ACDesignsGarage 2 месяца назад

Thank you, it means alot comming from a fellow painter!!! I'll be praying for you, hope you have a Blessed day!!!!!

@thefamily_ak1863 5 месяцев назад

I've learned a bunch , thx man

@ACDesignsGarage 5 месяцев назад

Thank you very much!!!

@johnelliott7375 5 месяцев назад

Very impressive spray coverage for a can, dumps the paint on it

@ACDesignsGarage 5 месяцев назад

She dumps it for sure lol!!!!

@amriiodddsantanaaa5041 Месяц назад

How long those it take to dry the paint. 🎨

@ACDesignsGarage Месяц назад

All the way through probably a couple days. One easy way to check is to stick your finger nail in in a hidden spot. When it's dry it should be hard.

@Santosandrade-u7z 4 месяца назад

Wow I'm going to start paint my car today 😳

@ACDesignsGarage 3 месяца назад

Awesome, good luck!!!!

@ANOCKS 3 месяца назад

Use that as your base coat, send it down a little and clear coat it and then repeat, and the warmer the weather the flatter the paint will dry

@ACDesignsGarage 3 месяца назад

Thanks for the tip. Check out my video where I 2k clear it and cut and buff. I was amazed how it turned out!!!!

@ZaZaKushulia 2 месяца назад

Paint jobs is expensive I was just trying to get the roof trunk and hood touch up painted at Maaco and the estimate was $1500-$1800

@ACDesignsGarage 2 месяца назад

Yes they are. Materials are out the roof!!!

@billymaul8139 5 месяцев назад

love this pretty cool paint

@ACDesignsGarage 5 месяцев назад

Thank you!!!!!

@jaredwike8584 5 месяцев назад

Nice video man! Gonna try it on a 65 c-10

@ACDesignsGarage 5 месяцев назад

Stuffs impressive, im thinking about sanding it this week and spraying that 2k spray paint clear to see how it does.

@bradbruggeman6745 3 месяца назад

I wonder how well and how long that will hold up to the sun and elements?

@allen2055 3 месяца назад

We are aerosol spray paint manufacturer from china.are you looking for aerosol spray spray paint?

@ACDesignsGarage 3 месяца назад

A month Later it still looks as good as day day 1

@russpendergraft5057 2 месяца назад

Of i ever paint another car or truck im getting that sawzaw attachment to sgake the spray cans! 👍 First saw one on Puddins Fab Shop !

@ACDesignsGarage 2 месяца назад

I'm building a fresh batch this week. I love watching @puddinsfabshop!!

@russpendergraft5057 2 месяца назад

@@ACDesignsGarage PFS is one of my favorites! I watched most of his videos , there's a few others i watch, just wish I didn't have such bad arthritis in my hands! I can't do much mechanical work now, a few years back I did a lot of work on my OBS Suburban, the paint was shot! So I sanded it primed and painted and clear coated it with the small rattle cans ! Turned out really good ! But just wore my old hands out!

@123andme Месяц назад

Duct tape can to a long blade if you are hard up.

@susanray975 4 месяца назад

So helpful... Great video...

@ACDesignsGarage 4 месяца назад

Thank you!!!!

@craigwatson9736 5 месяцев назад

I will !! 1969 gmc truck I will let you know how it turns out thanks man !

@ACDesignsGarage 4 месяца назад

Awesome!!!!

@rickyhildebrand114 4 месяца назад

I have always heard that Rust o Leum contains a "ALlKYD" or fish oil which is not compatible with other paints causing other paints to lift.

@ACDesignsGarage 4 месяца назад

I think they took out the fish oil is what I heard. I shot some 2k clear over the turbo can this week and buffed it and its SLICK!!! It goes live on the 24th at 8 pm est.

@MaccTestarossa 5 месяцев назад

Have you done the buff job yet? Waiting on that video

@ej1coupeguy629 2 месяца назад

What part of nc are you in brother I’m also in nc

@ACDesignsGarage 2 месяца назад

Around troutman NC

@cliffwoods2073 11 дней назад

35 minutes. No paint. Spray it damn it!!!

@ACDesignsGarage 9 дней назад

Hahaha just fast foward

@kcbeerslinger 5 месяцев назад

so what if you waited a few days and then do the second coat? Would it still orange peel? How about doing 1/2 of the bed side cut and buff and half with the clear coat.

@ACDesignsGarage 5 месяцев назад

Thats a great idea, I think im gonna wet sand and buff this week and clear it next week. Ive been thinking that the reason it peeled so bad was the pressure must of dropped a little because it was running out of paint. Usually if you let it tac up and spray with normal cans the second coat looks a good as the first. What ive found that causes peel is low pressure and too much fluid!!

@chrisbailey4254 3 месяца назад

Would be good to see the result of it being flattened out and buffed up. Cheers Chris Bailey

@ACDesignsGarage 3 месяца назад

Yes here Isa video where I did that, also I have one where I 2k cleared over the turbo and buffed it for super shiny finish! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-fqGtOnILqwc.htmlsi=73pjyiS8q4NhnJcA

@chrisbailey459 3 месяца назад

@@ACDesignsGarage Good result with both methods. Regards Chris Bailey

@jamesn.4892 5 месяцев назад

I like your paint shaker. Version 2.0 could use a thumb screw style hose clamp.

@ACDesignsGarage 5 месяцев назад

Thanks I was thinkin the same thing!!! Im gonna make a small run of them for my website if anyone wants one, hope to have them up by may 6th.

@timothymelius9 5 месяцев назад

Boy I wish I was forty six again. I'm at sixty two years old. I running breath real easy😂😅

@ACDesignsGarage 5 месяцев назад

Hahahahahaha

@ANGEL-gd5qg 3 месяца назад

Did you use gloss black ?

@ACDesignsGarage 3 месяца назад

Yes

@nancyflower3190 5 месяцев назад

As i always say you paint professionally or pay someone professionally only because you like the talent and or the art but almost never to make a profit. In most cases spray paint is good enough to protect and look to the average person without spending money. Cars lose values over time unless it’s Jay Leno. are or an Italian car

@sarabyrd3374 2 месяца назад

curious, how much did it cost in all?

@ACDesignsGarage 2 месяца назад

Paint was around $30.00

@edgardomatos6923 5 месяцев назад

I'm consider that can . I like to paint lower chasis., qt panel . thanks . oh that 1st coat was great , very clear reflection, 2nd coat orange peel .. but good still .

@ACDesignsGarage 5 месяцев назад

Thank you!! It's tough to make that second coat to lay out slick, I think it dries to fast to flow out.

@JaRuuizz 2 месяца назад

Have you tired this since from a further distance? Id imagine youd get less peel holding it back another 6 inch

@ACDesignsGarage 2 месяца назад

Yeah, I tried everything I know to do but I think it just dumps a ton of paint lol

@JaRuuizz 2 месяца назад

@@ACDesignsGarage yeah, i just tried with the Canadian version, the tremclad, couple runs, but it turned out okay..humidity has been between 75 to 95 as well

@rongamble9884 4 месяца назад

Most painters use what's called sealer to lock down anything that is going to cause solvent pops adhesion problems etc

@ACDesignsGarage 4 месяца назад

Thanks for the tips! Also, thanks for watching!

@alanr4863 5 месяцев назад

Iam 66 I have a 72 Chevy pick up truck that been in my family since 1973

@ACDesignsGarage 5 месяцев назад

Man thats pretty cool!!!

@Elfenyo 3 месяца назад

Rustolum clear in turbo please, I’m failing with mine

@jrgoodman4859 5 месяцев назад

When doing body work you always want the sand on a 45 not straight across to keep the sand marks out of your paint job

@sneakysgarage2412 2 месяца назад

👍

@troymcgee7317 5 месяцев назад

hey brother i'm new here i just subscribed what i just seen you do i loved it i would like to see the cut and buff

@ACDesignsGarage 5 месяцев назад

Thank you it will be up this weekend, glad to have you here!!!!

@johnelliott7375 5 месяцев назад

If you store your paper in the clean room you won't have as much cleaning 🧹 to do but the cleaning part is the part that makes it or breaks it.

@ACDesignsGarage 5 месяцев назад

I agree!!!

@trr5291 4 месяца назад

I spray painted a junky old peeling Buick a long time ago. It didn't turn out well. I didn't know what I was doing. I bought dull paint. But sadly, it looked better.

@ACDesignsGarage 4 месяца назад

You should try this new spray paint it has amazed me on the difference!!

@trr5291 4 месяца назад

@ACDesignsGarage If I ever need a car painted, I may.