Тёмный

Sprinkler Repair Quick and Easy 

Todays Task
Подписаться 59 тыс.
Просмотров 1,3 млн
50% 1

Trenching Shovel: bit.ly/32D4zaj
Channel Locks: bit.ly/3tHEJ0L
Todays Task Hat Info, Email: mytodaystask@gmail.com
Have an Idea for a video send us an email at mytodaystask@gmail.com
Thanks for Watching todays video. The Products used in today's video are lists below as affiliate links.
Want to send tools for Demo?
PO Box 6451 Logan UT 84341
(Tools will not be returned)

Опубликовано:

 

26 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 348   
@truegrit7697
@truegrit7697 6 месяцев назад
Hi! I am a 64 year old woman and I followed your instructions to the letter and I just replaced my sprinkler head successfully! My old sprinkler head was a mess and needed replacement, so I purchased one. I foolishly installed the new head when there was still water in the sprinkler hole - rookie mistake. Of course no water came out - it was completely clogged. I waited a couple of days for the water to dry up, took out the new sprinkler head, and disassembled and cleaned it according to your instructions, and then reinstalled it. It works wonderfully! Thank you for being such an amazing teacher! 😃
@buckeye9252
@buckeye9252 6 месяцев назад
Nice! I like to run the sprinkler for a bit with out the head if doing a replacement. This way it clears out the pipe which may have dirt in it from the removal.
@mayankgulati6557
@mayankgulati6557 5 месяцев назад
good to hear that, sir can you tell me what is the name of the sprinkler this man used in the video, also what what you suggest i should use in a small lawn of 20 ft x 10 ft
@clareteague9319
@clareteague9319 Месяц назад
I am 65. So thank you for your comments. I just got a quote of $1000 to replace 10 heads. Nope I’ll try this first.
@JRTuttle4
@JRTuttle4 Месяц назад
@@mayankgulati6557 The brand is Hunter. I have the same ones.
@larrynelson7839
@larrynelson7839 3 месяца назад
Great video which will really help your viewers! I have installed several systems and always made my own repairs for 40 years. The only suggestion I have for the RU-vid Viewers is: Often, when you attempt to unscrew the cap, the WHOLE BODY rotates instead of JUST the cap unscrewing. As you know this causes the body to unscrew from the water line connector (for the sprinklers that have the threaded connection on the bottom). So I typically dig down a little bit to expose a portion of the body, grasp the BODY with the channel locks and then using a second channel lock to unscrew the cap. This ensures that ONLY the cap unscrews and not the body from the water supply line.
@TodaysTask
@TodaysTask 3 месяца назад
That is a great tip!
@veteranowned7610
@veteranowned7610 2 месяца назад
Very well explained! I have been repairing and moving sprinklers my self the last few months since this is a new home. The company who did it were terrible. Videos like this just give me more ammo in my knowledge pouch! Thank you!
@vargapa101
@vargapa101 2 года назад
To prevent mud clogging up your sprinkler, i suggest using a cut off piece of PVC piping (in Europe we use them for sewage and drains) and dig it in around the spriknkler to the sprinkler is in the middle. The void between the sprinkler and pipe you then fill with little rocks. This way you have clean space around your sprinkler, even if it leaks water it never gets muddy and thus dirty. Learned this from a gardener.
@handyandyhomeandfarmservic7968
@handyandyhomeandfarmservic7968 2 года назад
Very good tip
@stevelopez372
@stevelopez372 Год назад
Good suggestion. My neighbor has done this and the install was poorly done and looks lousy. No consideration to aesthetics. Most sleeves are sticking up all cockeyed and crooked no use of gravel. I’m sure there is a way to make it look more professional. Lol.
@srcastic8764
@srcastic8764 Год назад
@@stevelopez372use black pvc, which is sometimes available for sewer use.
@jellen7332
@jellen7332 11 месяцев назад
THAT IS A GOOD IDEA... especially where the ones that get broken also if you ever cap one sprinkler off always put a coin or maybe a metal washer... just so you will be able to find it... always have sprinkler people give you a sprinkler layout or take pictures. its not fun trying to find them 10 years later.
@teaguejelinek4038
@teaguejelinek4038 5 месяцев назад
I see this at work(residents) sometimes. its a little extra effort for extra survivability. set the pvc right though or it looks janky.
@mikehenderson54
@mikehenderson54 2 месяца назад
Loved that you included some of the production. People don't realize that it takes some time to put a good presentation together. Plus, your video was the perfect amount of time. Some of these are way, way, way too long for simple tasks. I have some sprinkler heads you didn't cover so I'll have to find another RU-vid. Thanks.
@stevegmag
@stevegmag Год назад
nice video... I really like the outtakes, so people can see that it isn't always as simple as you make it look in the final video.
@davidhoque5864
@davidhoque5864 13 дней назад
Thanks for posting! Good job explaining
@christineboland9741
@christineboland9741 3 месяца назад
Wow, for someone that knows NOTHING about irrigation, I just fixed my first sprinkler head! It has been watering my brick for years and I happen to have my channel lock outside for another project. One spin to the right, and it’s fixed! Most women don’t touch irrigation systems and now I’m not afraid….Thank you. 😊
@robburton3255
@robburton3255 Год назад
My BEST improvement was installing a wifi sprinkler controller. This way I can test my sprinklers and repairs without having to walk all the way back into my garage (where my control box is installed) and then back to my sprinklers. It's a game changer. It also allows me to turn off my sprinklers from anywhere if it starts to rain. AND, there are some pretty significant rebates on many wifi controllers from state or local government programs (I live in CA).
@brianherman503
@brianherman503 3 месяца назад
Would you mind sharing the name or a link? I've been wanting to find one and haven't had good luck
@56icefire
@56icefire 2 месяца назад
@@brianherman503 Rachio
@derekzimmer6335
@derekzimmer6335 2 года назад
Tried minutes ago with two sprinklers, located along the walkway to the front door. WORKED!!!!! YOU MADE MY DAY, , MY WEEK, MY SUMMER!!! Can’t say enough THANKS!
@roydeandye
@roydeandye Год назад
This is just what I needed to see. One on my sprinkler heads was turned 45º inadvertantly by the a national lawn-care service aerating my lawn last fall with a plug-punching implement. I've been watering my neighbor's empty driveway for 15 minutes every two days because of this. I'm going to readjust it myself in the morning. Thanks for making and posting this great how-to video.
@billyjosephandthearmyoflove
@billyjosephandthearmyoflove 11 месяцев назад
Love the out-takes at the end!!! Now when I go to follow your tips I won't feel disheartened when things don't go perfectly : ).
@kdedesko
@kdedesko 2 года назад
That was the most useful how-to for sprinkler repairs I have seen….well done
@davehardy9555
@davehardy9555 2 года назад
Didn't know about the notch designating the left side of the sprinkler head. Nice tid bit there! Thx!
@derekzimmer6335
@derekzimmer6335 2 года назад
Greatest insight I’ve ever learned. If the problem is just the guts of the sprinkler, why replace the entire plastic sprinkler. Thank you very much!
@joecruz1872
@joecruz1872 4 месяца назад
Thanks so much for the tutorial. It has been a while since I have done this work. So thanks for the refresher. Keep up the good work.
@alandecorte2962
@alandecorte2962 Год назад
Very helpful. Now I'm much more comfortable making minor repairs to my sprinkler system. Wish me luck!
@AdamHrebeniuk_apexadam
@AdamHrebeniuk_apexadam Год назад
So clear! Love that you address something after fixing it and it isn’t fixed! Perfect.
@CherCherico
@CherCherico Год назад
Very good video. I have been fixing my heads myself and I am getting better each time. Thanks for this helpful video.
@TurboNorm
@TurboNorm Год назад
Your video gave me the confidence to try and repair a sprinkler head on my mother-in-law's system. Success! Thanks.
@jandavis331
@jandavis331 5 месяцев назад
Jan from Poland. Thanks for the advice. I will have a bash tomorrow to try and sort it out.
@sebastienlavallee1285
@sebastienlavallee1285 5 месяцев назад
Hi just a quick tip, when it pisses like that from bottom before you do anything, try to pump it down with your foot while its working a couple times. It's gonna evacuate any dirt or debris that is between the while seal and the part that goes up when it's working. Most of the time i just pump it and it fixes itself.
@OfelinaBello
@OfelinaBello Месяц назад
Muchas gracias por tu video y por explicarnos de manera sencilla y práctica cómo reparar el irrigador.
@champikawickramaratne108
@champikawickramaratne108 28 дней назад
Awesome video and helpful instructions. Thank you!
@pkshowsupnoobsallday
@pkshowsupnoobsallday Месяц назад
Dude.... u just saved me.... thanks bro..
@disneymother801
@disneymother801 3 года назад
Thank you for explaining your tasks in easy terms. I’m a single mother so I am the one that fixes easy stuff around the house. It’s easy to follow your directions. Also I love your blurps at the end of your show. It shows you make mistakes too! 😂
@k2mm
@k2mm Год назад
Why do single mothers always have to let everyone know that they are a single mother?
@SledDog5678
@SledDog5678 Год назад
Clark- clearly you are (1) CLUELESS and (2) disrespectful! She is a single mother, ffs!!! Mothering job is 24/7- but, for your braincells, let's call it her FIRST FULL-TIME JOB that sometimes leave many a sleepless nights as well. Workforce job (PAID) would be HER SECOND FULL-TIME JOB. Her household upkeep, laundry, plus grocery shop & prep would be HER THIRD FULL-TIME JOB. Emergencies or issues such as addressed in this video aren't common events that allow a SINGLE mother the time or financial resources to handle so she must learn to do what she can on her own! Already impacted time & emotionally with THREE full-time jobs but with only ONE paying job...it is perfectly acceptable, even honorable to mention "single mom." I expect all helpful-channels feel a deeper satisfaction they helped an already OVERWORKED woman. All I can say to YOU (commenter) is "WOW!" (smh...in disgust!)
@Realjenestate
@Realjenestate Год назад
​@@k2mm bc we do what u can't.
@k2mm
@k2mm Год назад
@@Realjenestate you mean make proper life decisions?
@Realjenestate
@Realjenestate Год назад
@@k2mm I am only accountable for my decisions not that of others. We all answer one day for every word we speak. There is final judgement.
@nataliedallimore3218
@nataliedallimore3218 2 года назад
Thanks so much! Single lady and need all the help I can get! Love the bloopers!
@digsindirt4490
@digsindirt4490 2 года назад
Great tip on keeping the spare parts that are still usable. I have a plastic tub on a shelf with random parts. It’s saved my bacon more than once.
@WFSmith
@WFSmith Год назад
Been in the irrigation business for 37 years Rainbird 1800 series is the most durable sprinkler head made These are the only ones I install on new systems The Van nozzles will chip if you hit them with a line trimmer In my area we use mostly 4-6inch pop ups When I do a repair I install what ever brand is already there just to keep everything the same
@JuliaNease
@JuliaNease Год назад
Thanks! With the timeline I was able to go directly to the part of the video i needed. Great job!
@sondramyles1120
@sondramyles1120 2 года назад
I’m going to try this for the first time.
@thomassawyer6523
@thomassawyer6523 2 года назад
I like being self-sufficient, and appreciate the detail of your video. TY and subscribed.
@TheOcean777
@TheOcean777 11 дней назад
Great video. Thanks.
@STEPHENWHILL
@STEPHENWHILL Год назад
Man that was a great help! Now I feel confident in doing my own. Thank you!
@TheHondakiller420
@TheHondakiller420 2 года назад
As someone who works on irrigation systems for a living the reason the head isn’t right on the cement is because when you edge it will chew the heads up also why not use a 15 quarter nozzle instead of the adjustable van nozzle you will get better coverage with the regular nozzle
@progression_decibel
@progression_decibel Год назад
Jon, if I may I had a few quick questions - 1) I have an adjustable spray head in the same exact spot as shown in the video - I want to water the thin grassy strip across the sidewalk and adjacent to the road - should I replace the stationary spray with something else or perhaps change out one of the other heads in the middle of the front lawn to a rotor and let it "arc" over the sidewalk onto the strip? I don't have any piping in the strip areas to put a sprinkler. 2) Assuming like-for-like pop-up height, GPM nozzle, etc. can we interchange sprinkler brands? I think all of mine are Hunter but I have seen videos were people like Rain Bird better. My controller is a Hunter Pro-C. And 3) how do we determine the PSI of our irrigation system easily (and where would I do it?) I am fairly handy with tools, etc. Thank you in advance.
@Shvrngrl1
@Shvrngrl1 2 года назад
This was so helpful! I had no idea sprinklers came apart like this. I have been searching for the perfect 4 ft pop-up and didn't know I could just change the shape of the nozzle. thank you.
@stluke7797
@stluke7797 Год назад
I applaud you, as some women are just scared to try, but you seem the 'go-getter', go for you!
@seanwickham8905
@seanwickham8905 5 месяцев назад
4 ft pop-up?! Are you watering a football field?
@ronaldsimpson4963
@ronaldsimpson4963 2 года назад
I modified a 3" diameter tubular "stand up" bulb planter by sharpening and serrating its bottom edge. Makes quick work of keeping sprinkler heads free of dirt and grass.
@avpowerstn1
@avpowerstn1 2 года назад
That's what I use also.
@rossstevenson4616
@rossstevenson4616 2 года назад
LOL! Great video minus some of the audio in the middle cracking. Very helpful info. Love the outtakes at the end.
@umeshdubey1599
@umeshdubey1599 3 месяца назад
Thank you so much for educating us ❤
@jamesrenkema9369
@jamesrenkema9369 2 года назад
Great video , I use a old toothbrush in the spring to clean off the heads as they can get plugged full of dirt then wont fully spray out , Thanks for the video i will go fix mine
@christineboland9741
@christineboland9741 3 месяца назад
And I always love good outtakes!! 😁
@justinbowles4671
@justinbowles4671 4 месяца назад
I’m about to tackle a pretty big sprinkler system and could definitely use some advice!!
@tobiasxxx1742
@tobiasxxx1742 Год назад
Thanks! I have this Problem and till now, i dont knew that i could open the housing :)
@mohammadsohrabi5752
@mohammadsohrabi5752 2 месяца назад
Thanks, very good explanation and help.
@anonymity2882
@anonymity2882 Год назад
Thanks dude. Quick and to the point.
@RyanKassel
@RyanKassel 2 года назад
Love the outtakes at the end!
@tinaedberg6875
@tinaedberg6875 2 года назад
Sometimes on the video because the top is black if you don't get close to the top part of the sprinklerhead you can't actually see what you're doing .but I do like the videos they've helped me a lot I've prepared my own Sprinkler heads.
@TammyMartinez-lj2ld
@TammyMartinez-lj2ld 4 месяца назад
Love the outtakes!
@yvettechervet3319
@yvettechervet3319 2 месяца назад
where can you buy replacement parts. your video was extremely helpful, thank you.
@jasonwu6564
@jasonwu6564 Год назад
Thank you for sharing.
@thcrtn
@thcrtn 2 года назад
Appreciate your time and knowledge, I really just asked " why are areas only being sprayed and. Not others ... Turns out the very tops chipped, and I can go get replacements 🙌 I fixed the timer a few months ago...
@gloriad27
@gloriad27 2 года назад
Thanks so much for the easy do it yourself video.
@Michelle-qn9bd
@Michelle-qn9bd 2 года назад
Going to attempt to fix my front yard. Fingers crossed
@lisagardner5157
@lisagardner5157 Год назад
Thankyou. This video helps me to understand better
@marlenerodulfa4397
@marlenerodulfa4397 8 месяцев назад
Good video. Thank you. I’ll be changing sprinkler’s missing head. I think the lawn care guys knock it out with the edger or lawn mower.
@michaeldemarco9789
@michaeldemarco9789 2 месяца назад
Very well explained
@becconner1873
@becconner1873 3 года назад
You can also buy guards to go around the sprinkler to stop the lawn growing around it
@jayasmrmore3687
@jayasmrmore3687 3 года назад
Where to get it?
@thesprinklerguyandmore2776
@thesprinklerguyandmore2776 2 года назад
@@jayasmrmore3687 Bunnings, Amazon, eBay and more
@moxnix
@moxnix 2 года назад
I made some using PVC pipe and or 4" & 6" Corrugated Drain Pipe. If you don't want to buy, check some construction dumpsters.
@JettaTDI2005
@JettaTDI2005 2 года назад
Rock on dude.. I walk around last week and found some issues of heads to low and needed to rise them a few but its always nice to see sprinkler head issues and rather easy to see how simple it is to fix them. Your video was rock on solid.
@cesaraugusto123
@cesaraugusto123 2 года назад
Wonderful tips. Thanks
@mariecamenzind
@mariecamenzind 2 года назад
Thank you!
@amparolago3103
@amparolago3103 Год назад
Awesome. I followed your steps and was able to fix a couple of sprinkler heads all by myself. Thanks!
@billturner4427
@billturner4427 2 года назад
Very cool. Thanks
@dominiccolon6506
@dominiccolon6506 Год назад
Great job, nice to clean filter 1st.
@winbishop1264
@winbishop1264 4 месяца назад
Worked exactly the way you said. Save me time &$ Thanks
@joewalsh9685
@joewalsh9685 Год назад
With the Orbit 1800 replacement cost at $6-7 each, I always replace the entire unit. So many are beat up after years of use and if it saves me another fix in a couple years, replacement is worth it.
@lcloverviewman5755
@lcloverviewman5755 2 года назад
Ive been searching RU-vid for an understandable video on popup sprinkler repair, and yours is by far the best. The video is clear, especially your closeups explaining arc adjustments. I'm gonna get away from this computer now and go back outside! Thanks
@pyemesomboon6721
@pyemesomboon6721 3 года назад
your explanation is good Thanks
@mariay.279
@mariay.279 3 месяца назад
Thx. Enjoyed n found it so educational.
@rsaathoff
@rsaathoff 2 года назад
Working with a customer that had 12 heads on a 1" valve. He's got rocks in the line from a repair he did himself. However he barely had enough pressure to run the heads when in ideal conditions. So can't get the system to flush the rocks out. I think I'll try shuting all the nozzles off and try flushing the two or three clogged heads. I design a system with a 1" value to have no more than 9 spray pop-up heads to main tain optimal pressure.
@philturner3089
@philturner3089 2 года назад
It all breaks down by GPM from the water supply. A 1" water supply with a 1HP well can sufficiently run up to 14 spray heads. Been doing irrigation for over 20 years.
@AZDragon69
@AZDragon69 Год назад
Great tips and explanation
@sandyc6569
@sandyc6569 3 года назад
Job well done Joel!!! 👍💞💖💞👍
@jethro9341
@jethro9341 3 месяца назад
My sprinklers are gravity fed directly from a canal. Almost daily Im out there cleaning out mud, seeds, grass, bugs, out of sprinklers. The little seeds make it thru and grow in the yard. Its a never ending battle. Fricken sucks.
@TodaysTask
@TodaysTask 3 месяца назад
Secondary water systems need a lot more work. Good luck 👍🏻
@JL-gs6wk
@JL-gs6wk 3 месяца назад
You took the cap off and looked into the sprinkler and saw three rocks. How did you get the three little rocks out of the bottom of the sprinkler body? This is a really good video. Thank you for making it.
@briankennedy5578
@briankennedy5578 7 дней назад
Turn on water with cap off. Water will flush rocks out
@JL-gs6wk
@JL-gs6wk 18 часов назад
@@briankennedy5578 thank you for responding.
@koiprathumathew3460
@koiprathumathew3460 Год назад
Very good
@BuddyBearCreator
@BuddyBearCreator 2 года назад
a good reason to not have gotten rid of quality made, brass sprinkler heads )good for many years) for cheap, foreign, plastic manufactured parts that has to be replaced a few times a years.
@matthewdennis4037
@matthewdennis4037 2 года назад
Sprinkler heads that are properly installed and are well taken care of will last years and years too come. The brass heads might of lasted long but came with their own problems when it came to servicing them. when it came to calcium build up and the galvanized fitting fusing with the PVC fittings making it sometimes impossible to replaced was very expensive. Been doing this for over 15 years and i went through the transition and had my fair share of brass sprinkler heads needing replacement. I wouldn't wish it on my worse enemy.
@jaedenmiller1740
@jaedenmiller1740 2 года назад
THANK U SIR !
@kingssing
@kingssing 2 года назад
Helpful advice thank you
@johnkeegan5226
@johnkeegan5226 Год назад
great info and easly understood
@rickramirez7710
@rickramirez7710 3 месяца назад
Hello, I have the same sprinkler control system pictured in you video. But I have a hard time setting the Time, Day and the on and off for my 5 sprinkler zones. By chance have you done a video on how to use and set up that sprinkler control system? please tag me on it. Thank you for keeping the lessons simple.
@brotherbillamis
@brotherbillamis 2 года назад
Thanks for saving thousands at our Church grounds
@Kwaitao
@Kwaitao Год назад
Turn on the water little (prevent the dirt drop in) before install the sprinkler
@avidhaliwal3664
@avidhaliwal3664 2 года назад
This was so helpful! Thank you.
@ChristopherDillman
@ChristopherDillman 2 года назад
These sprinklers are antiquated garbage and flood your lawn. Also break frequently. Installed the MP Rotator nozzle and lo-flo system from Hunter. Lawn has never been greener. 🤙
@mdwabi2516
@mdwabi2516 8 месяцев назад
Ha. Love the out takes
@robincallahan6015
@robincallahan6015 Год назад
Helpful, thank you!
@CompetentSalesUSA
@CompetentSalesUSA 2 года назад
Thank you
@jlcrisman917
@jlcrisman917 Год назад
Thank you! Very useful!
@tomrossaki7720
@tomrossaki7720 2 года назад
I love to do a DIY repair. Thanks.
@sherrygarrett8503
@sherrygarrett8503 2 года назад
Really helpful....thanks!
@mbrenke
@mbrenke 2 года назад
Thanks!
@fpaz3301
@fpaz3301 Год назад
Awesome job
@tombournique
@tombournique 2 года назад
During the first part, you could have tryed to remove the nozzle and take a hose and wash out the tube. Mine was full of dirt that was clogging everything up. Then blow into the nozzle to make sure its not clogged and wash it out. Reassemble and take hose and shoot water into tube to make sure it comesout of nozzle. I had my concrete driveway replaced with pavers and a bunch of the supply lines got cracked or broken and the funny pipe and sprinkler heads got broken by the landscapers running over them or using an edger that cut through the funny pipe since the contractor didnt bury everything deep enough. Sucks that I live in an HOA that controls the sprinkers and can only tell if there is a problem when the sound of gushing water wakes me at 3 am.
@AereForst
@AereForst 2 года назад
Good tips, thanks
@brandonjackson2275
@brandonjackson2275 Год назад
Super helpful!
@robertofigueiredo9810
@robertofigueiredo9810 2 года назад
thank you very much
@anithakamath2489
@anithakamath2489 3 года назад
Hey Joel. Can you please make videos on how to mow lawn perfectly, best lawn mower out there, how to use a leaf blower. First time homeowners, need some help. TIA
@Moondoggy1941
@Moondoggy1941 2 года назад
Looks for a Toro with a Honda motor, I have the Honda lawnmower with the plastic deck, so not cheap.
@jjess1323
@jjess1323 Год назад
Thanks. Subscribed!
@tbrown3402
@tbrown3402 Год назад
Thanks
@JJ-lj9yu
@JJ-lj9yu 2 года назад
Thank very useful video.
@flowergirl1765
@flowergirl1765 3 года назад
Just what I needed! Thanks!
Далее
"Когти льва" Анатолий МАЛЕЦ
53:01
HOW TO FIX CLOGGED SPRINKLER HEAD
5:05
Просмотров 164 тыс.
How to Fix 5 Common Sprinkler Head Issues
14:38
Просмотров 357 тыс.
Types of Sprinklers
6:52
Просмотров 325 тыс.
How to raise a sprinkler head in under 5 minutes
3:32
Просмотров 362 тыс.
IRRIGATION ABCs for SUCCESSFUL DIY INSTALL | PART 1
27:39
How to Fix Broken Sprinkler Heads
12:34
Просмотров 808 тыс.