Sprinter VS30 (2019+) Door Panel Removal

Подписаться 1,9 тыс.

Просмотров 6 тыс.

50% 1

Our Sprinter Van HowTo Series! Short, detailed and simple videos for working on a VS30 (2019+) Sprinter. Sometimes you need to remove the door panel in your Sprinter Van to either install deadener or insulation or even upgrade the sound system. This should help with the process and tools required.
** DISCLAIMER: We are not professional builders and this video is made primarily for entertainment purposes. You should always follow the manufacturers instructions directly, do you own research and ONLY attempt projects like this at your OWN risk.
** NOTE: Some of the links below are affiliate links and we receive a small commission for purchases products through those end points. We will never recommend a product we don't stand behind and don't use ourselves. Everything listed below we used for our own build and weekly, if not daily, for our other ventures. Thank you for your support!
Recommended Tools:
- Trim Removal Kit - amzn.to/3Cn7OEA
- #2 Phillips Screw Driver - amzn.to/3CAnjJp
- Pick Tool - amzn.to/3CzvxBN
- Dewalt Impact Driver & Cordless Drill Combo - amzn.to/3F1cVfF
- Wera Driver Bit Set - amzn.to/3oWfoDc
- Drill Extender - amzn.to/44bLFoN
- Replacement screw covers if Mercedes shorts you - www.mbpartscenter.com/oem-par...
Video & Sound Equipment Used to Make this Video:
- SE Electronics Neom USB Microphone - amzn.to/3Aac34P
- Rode PSA1 Mic Stand - amzn.to/3H96FmR
- Shure VP83 Shotgun Microphone - amzn.to/3pzc8Kw
- DJI Wireless Microphone (HIGHLY RECOMMENDED) - amzn.to/3fK0DhZ
- DJI RS3 - amzn.to/3E7yTgU
- Sony AR7II - amzn.to/3CmDN9c
- Sony FE 16-35 F4 Lens - amzn.to/3ClzhI8
- Sony FE 85 F1.8 Lens - amzn.to/3DRMXeu
- Gitzo Traveler Tripod - amzn.to/3RfJ8U6
- SanDisk Extreme Pro SDXC Memory Card 128GB - amzn.to/3TpNlXa
- SanDisk 1TB Extreme Portable SSD - amzn.to/3Awf140
- MacBook Pro w/Final Cut Pro and Apple Motion - amzn.to/3Te9k1V
Video Contents:
0:00 - Splash Screen
0:09 - Tools Required
0:38 - Fastner Removal
2:30 - Panel Removal
3:23 - Outro
Music from Uppbeat (free for Creators!):
uppbeat.io/t/soundroll/tropicana
License code: 1IUKO4M0TZ92ZOMZ

Хобби

Опубликовано:

4 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 24

@dorothyparsons4582 6 дней назад

Awesome so helpful thank you

@moonrakerdesign 6 дней назад

Hey Dorthy, you are welcome. Glad the video came in handy! Thanks for letting us know :)

@recordstorewhore8599 8 месяцев назад

Straight to the point. Excellent info! Nice effects! Pro video quality and editing. I will check out your others when I'm done with the stereo / sub install. Thanks!

@moonrakerdesign 8 месяцев назад

Thank you for all the kind words and taking the time to comment. It really means a lot to us!

@vanDiesel-pe6xt 7 месяцев назад

Excellent. Thank you

@moonrakerdesign 7 месяцев назад

Of course!! Glad it helps!

@mikeinmon4997 3 месяца назад

Thanks!! I just found it! Yes I haven’t heard great things long term about those windows. I’ll look for OEM.

@moonrakerdesign 3 месяца назад

Yeah so far so good on the CRL Windows, but you have to be careful with them because the mechanism is super delicate. I’ve heard decent things about the VWD sliders BTW the only thing I don’t like about them personally is how much black mask there is on the window. Almost 1/3 of the area is covered which is why I like the OEM sliders, I haven’t been able to find them for a good deal yet though :(

@mikeinmon4997 3 месяца назад

I have a rattle in that door after a speaker upgrade. Sounds like a potential loose screw or something left behind from stereo install guys. Going to take the door panel off and give it a look and sound deaden while in there.

@moonrakerdesign 3 месяца назад

Yeah there’s a lot of little areas that can rattle inside the door! The little foam tape on the back of the heads of the clips helped me on one rattle where I missed on of those. So definitely do that while you are in there too!

@mikeinmon4997 3 месяца назад

Thanks man great info! I also have a CRL dealer close and I really like the looks of them so probably going that way as well. I’ll have to be super gentle with the slider!

@moonrakerdesign 3 месяца назад

Awesome! Excited to hear what you end up going with! Happy building!

@wetlifesports 10 месяцев назад

Thank you, that helps.

@moonrakerdesign 10 месяцев назад

Awesome! Thank you for letting us know it was helpful. One thing we encountered recently on the drivers side during our Audio install project this last week was breaking the little white clip seen here in this video at 2:55. The part numbers are: - The drivers side (left in the US): 907727150064 - The passengers side (right in the US): 907727160064 Just in case anyone else faces this issue!

@brentziemer9932 13 дней назад

How do you pop the orange anchors out of the soor metal?

@moonrakerdesign 13 дней назад

Hey I used this trim removal kit amzn.to/3xjLz3J. I used the metal fork piece and then another plastic piece from that kit to protect the paint. It shows up here in my other video - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hFDmN5kshK8.htmlsi=Z75otPECAHDNyVY9&t=691 Hope this helps!

@croberto9096 2 месяца назад

Excellent. Is there actually any room to put any insulation, like 3M thinsulate? Seems that it would interfere with the window… just a guess/question.

@moonrakerdesign 2 месяца назад

Hey check our audio install and sound deadening videos for what we did here. We put all the 3M insulation on the door panel side and added hybrid sound deadening to the door.

@mikeinmon4997 3 месяца назад

Separate question but is there any slider windows you’ve installed you’d recommend. I didn’t see any videos from you guys…..

@moonrakerdesign 3 месяца назад

Are you talking about the side windows? We put CR Laurence windows in. It was our first video. Honestly if I were to do it again I think I would probably try to get the OEM Mercedes windows somehow. We have bunk sliders in our flares.

@DarrenOverby Месяц назад

How did you release the lock pull knob at the top of the panel? My panel is stuck at that point and I can't figure out how to get it to release from that point.

@moonrakerdesign Месяц назад

That door lock knob has a bezel piece that surrounds it that clips out of the door panel. Sorry I didn’t highlight that well enough. mbparts.mbusa.com/oem-parts/mercedes-benz-lock-knob-bezel-90772703009051 If you check the link it’s item 6 which gives you an idea of what it looks like. If I remember right its slide it up a bit and then push it out toward the window. Hope this helps!

@DarrenOverby Месяц назад

Got it. I found it on an unrelated video. I was incorrectly trying to lift the panel over the pull knob and was worried I might break something. Thanks

@moonrakerdesign Месяц назад

@@DarrenOverby Great news! Feel free to link that here if you think it will help others in the future. Thanks for calling this out and glad you got it figured out!