I was asked to take a look at this Spyra water pistol to see if I could fix it, having looked on line I could not find any info so here is a quick video to show the internals.
Hope this helps someone.
Stripping down a faulty Spyra.
Faults.
Blown bladder. Over filled?
Water then flooded the
Inside components.
Display full of water.
Electro magnet valve corroded and sticking.
-----------------
Display was sealed with silicone sealant and can be picked open. The circuit was then cleaned using WD electrical contact cleaner.
This fixed the screen and then re sealed with new sealant.
The electro magnet valve was corroded and not fully working, this was stripped and cleaned but still not good enough to short burst. When the trigger was held for the multi burst the valve did work better.
Bladder shown removed and stripped down.
The metal zip tie looks to be a one time use item.
4 янв 2023