So I have looked at both your videos/ disassembly and Assembly, in your Disassembly video the purple buffer is on the end of the spring guide, 5:24 then when you assembled it (9:23)you put the Purple buffer on to the spring guide followed by spring. So which is the correct way to assemble? Please
whoever assembles these pistols at the factory will burn in hell. It is not possible to unscrew the outer barrel without damaging it. I left it in WD40 for a day - it didn’t help. I strongly heated the part to which the outer barrel is screwed, then quickly poured cold water over the outer barrel. I clamped it all in a vice, wrapped it in a thick rag (so as not to scratch it) and unscrewed it with pliers. Still scratched everything. But I unscrewed it... It looks like the parts were painted and screwed together and left to dry. All the threads were clogged with some kind of shit. And it's not loctite. This is not a moving joint, there are no vibrations. NO LOCTITE NEEDED HERE. If you are still worried that the barrel will unscrew... just install a rubber washer (o-ring), etc., and there will never be any problems. To unscrew the screw securing the inner barrel, heat it first... otherwise you will strip the thread instantly. And lo and behold...there is NO need for loctite here either. If you are still worried, use the weakest, small drop of green loctite. And I don’t know why the part shown at 5:05 is needed... it doesn’t hold anything... thank God there is not a single situation in the world where you need to unscrew it. and If you really want to... you won’t be able to. it was fucking glued or welded by some asshole during assembly. but despite all this... the gun is just awesome)
Still waiting for the ssp18 carbine kit to be launched, its becoming a joke every month we visit the web and find the "In Production" logo as always, 3 ssp18 users in my team, waiting for the kit, im pretty sure we are going to sell the gun before you launch the kit XD....
