Stage 1 - How to debaffle a Vulcan 900 Classic pipes 

I just did this right before putting on my new Viking bags. Took about an hour from start to finish. I was wishing I had a Dremel with a circular cutting blade because I think this could be done in about 30 minutes. Anyways, a big difference in the exhaust!! Sounds even better "live". Not sure I will go to "Stage 2" because of the neighbors but I will take this new found happiness one day at a time. Thank you for posting. Reference: 2017 Vulcan 900 Classic.

Dude this is the exact same bike I have in this exactly the video I needed to see thank you

Thanks for uploading the video, i referred it when I debaffled my VN900C... thanks again !

Oohrah brother. Thanks for video. I ahave 2019 Vulcan 900 classic Lt. Be safe

Nice skeleton in the background, Classic!

Nice bike sounds amazing for a 900

What's up brother, lama brother here showing support and taking notes as im getting ready to do stage 1 on my vulcan

I have a 08 classic and the previous owner started the process of drilling off the rivet/studd heads. While i was riding one of the black caps blew off so now i have one pipe with the cap and the other without (it looks awful) . So im thinking about doing the stage one so they are the same.

Nice I love it how sounds 👍👍👍👍

Thanks for the video! Nice music by the way.

⭕️semper fi brother devil dog sounds awesome

I don't understand negative comments here, like why did you watch the video if you had nothing good to say? Thank you for the vid, hard to find stuff for the vulcan, or maybe it's just on the mobile version that it's hard. Did you have to make any adjustments after this stage or stage 2?

After your stage 2 did you experience a power loss?

SEMPER FI BRO. & THANKS !!!

Why didn't you just pull the baffles out? Instead of drilling more holes into them? Just curious fam and btw great looking bike 🔥🤘🏼

I just got a 2016 Vulcan...I think this may have already been done to it...it's pretty loud!

Yes indeed, something every adolescent should do with his or her new bike... Dean

Trouble hearing a couple of times. Can you post bit sizes for both drilling parts and blade size for easy list?

grat vid lama.!...so what u clean your wheels/spokes with and white walls man?

thats how i wanted to start by debaffle, but thought all that drilling is kinda experimental so i just replaced stock with cobra pipes and intake with pcv and it runs like a new bike or i should say like a different bike, and offcourse louder pipes save lives :D

WOW that is an Awesome way to destroy your exhaust , Good Job ,Bro

What you do is get something black to screw down on the flat part in the exhaust

Was this bike out before the polaris scout

I have been told that the full stage 2 baffle removal will cause the engine to run leaner but is this the case for just the stage 1?

I feel this isn't really "debaffling", because the baffles are still in there; they were not crushed or extracted. You just put holes on the back plates to make it louder. Real debaffling (where you crush or remove the baffles all-together from the pipe) give a deeper rumble.

Why did you drill out the baffle completely it would have given a better sound. There wasn't anything wrong with what you did but the baffle is still inside the pipes. Peace.

Did you notice any improvement or decline in performance? I just picked up a Vulcan 900.

What.is.stage.2.?

Won't the inside of the pipe turn black anyway?

Need to open those up to at least 1/2 inch holes. Gets rid of the " Hiss" sound

Thats not debaffled. Thats drilling holes. Debaffling is taking the whole insides completely out

cutting the pipes with that saw ...12 hours later

Laughed out loud when you were showing us the 1/4" drill bit to cut the 8 holes - maybe you should try a metal cutting bit instead of a brad point wood drilling bit - also, get a better set of bits - nothing wrong with Ryobi - just not the $1.99 set for working on butter.

if you haven't thrown out these oval parts and you have an ebay account, sell them to me

Naw man... just buy some pipes. This doesn't sound right at all. I hear air whooshing through those little holes you drilled more than the rumble of the bike, and that's just at idle.

WTF, is with the loud music and caput camera angle?

Nice video…next time back off on the music level….distracting trying to listen to you.

Annoying loud music. Couldn't hear him.

You ruined a good exhaust! Sounds a lot worse than before! You should have bought a cobra or v&h and kept the original untouched!

😂😂😂😂😂 sounds the same you just fuck it up the pipes

How to butcher your pipes 👎 in the Uk we need to put baffles in for annual test so this isn’t an option.