Start Stop wiring Basics 

Hey Craig, appreciate your motivation uploading all these electrical content RU-vid videos! Electricians need patience if they want to succeed in this trade. If anyone out there is just beginning this trade and feel intimidated don't worry because everyday you wake up and go to work you will learn something new. And sooner than later instead of asking electrical related questions you will be answering these types of questions! There is definitely money in this trade. If you want to stand out and become a successful electrician in the beginning listen more than talk. And if you have to talk ask questions. I truly believe any of us can be anything we want to be it all matters on where you put your time everyday you wake up..

I’ve lived in motor controls for the last several years, always good to go back to the basics from time to time. Nice video

Saved my day, thank you!

I like you. You show step by step and show how to wire the circuit as well. Thanks 😊

I've been doing electrical for 6 years and the videos that you keep posting are awesome, I'm learning from them alot. Thanks

Thank you for taking your time and teaching. Very simple and accurate the way you explain and demonstrate in the video.

I hate to admit I watch so many of your videos, but there’s a big difference between knowing how to wire and install and understanding what your doing. I initially learned by repeating what I saw, there comes a time when you have to understand what your doing and you help easily break down the components where I can understand even tho I’ve wired in these same systems hundreds of times. Thank you for the videos and making good explanation of their functions

What is the 3 wire on the start bottom

Thank you so much I'm going through school and these videos help out so much

Thank you for this video, I had a tough time in class with this. You make it much easier and slow it down for better understanding.

I work in industrial electric and this videos will be helpful to work in motors I appreciate your contribution.

Keep uploading I greatly appreciate this! Just started working as an apprentice electrician and am about to start my online classes!

Excuse me sir, I noticed you end up having a 3 hot wires connect to the n,o star switch. Is the wire that is tight to the hot side of the star button a holding contact, I didn't hear you say something about that wire.

Great video! Keep them coming!

Awesome explanation Craig.

A valued video for learning motor controls

God bless you for these videos, such great information and i really enjoy the way you teach , thank you for all you do brother!

Thanks for the awesome videos you put out! I really enjoy your videos!

Great video and really informative. I have a better understanding of the START and STOP buttons. I’m more confident to install my own circuits.

thank you very much for your lesson! it helps me a lot ! Jack Lam from Hong Kong

Thank you sir let me tell you; this video and the way you kept it short and specific really drives the concepts home and I’m really thankful. Keep making more like this in PLC logic controls etc

Thanks in Advance leave a comments so that i can shout you in my next video

Awesome video for newbies! @ 2:31 you're missing the Rung identification number and how many normally open or normally closed are in the relay itself, plus holding circuit identification where it's coming from. keep up the good work!

Sir you are Awesome appreciate your time

Awesome thanks for sharing your knowledge

Great videos,,,thank you sir

you didn't show the part when you added the third wire on the start button.

Love your videos

Hey Craig !! Thanks for the upload !! I'm looking to make a control box just like shown on the video. Do you think you can post a list of material needed as example purposes ? Am looking to make a home DIY installation such as this video Thanks again.

thank you for the content

too bad you didn't explain what the other black wire was for going to the normally open contact where the power came in from the normally closed contact was.

What is that other black wire going into the start button??? Relay?

Good videos, thanks

Million thanks.

I like your videos man.

Hi , I like your video. Thanks

Do those lights have terminals for both NO and NC?

My dude thanks

I’ve rewatched a few times did I miss how you tied in the sealing circuit am a new apprentice at a mine and am still struggling wiring up a bucket I’ll check your other vids

Thank you

What’s the holding contact called again? And is it inside the relay? Wondering coz I didn’t see you wire anything other then start stop and relay. I took coarses at scit in Anaheim in 2015

Where can i find how to wire the relay side of it cheers.

Is there another wire on the N/O i see 2 wires coming out of the N/O going to the relay but dont recall him mentioning where that second wire on the N/O is going to ???

I once holded or held my code book ;)

I have watched a few of your videos. Special interest in latch holding. I have a two pole 240 contactor that uses 24 volt coil. The latch holding circuits I have seen use contactors with 120volt coils. How do I set it up with the 24 volt coil. I have momentary button switches.

does those lights have a NO and NC ? how do you wire the stop light NO

Craig before you added the neutral there is only two wires on the normally open button. When you’re done landing the neutral at the 8 pin relay, I see an additional wire on the button. What is that?

Can you list the buttons and relays that you used? Without seeing the whole thing, it’s hard to follow. I’d like a start stop button with a light that comes on when it’s on. But I don’t know how to do that. I don’t understand the reason for a relay either. Paul

Number your videos besides that good job

Where does the pin 1 wire which is the common go to ?Thank you

How would you wire an emergency stop in-between the start/stop ?

So, could this be similar to wiring a start stop switch for motor

You never showed where the white cable went from the relay as in one part it looks like it goes to the on switch but at the end of the video there’s only black cables on the green switch

I have watched the 8-pin video with a holding circuit. I have watched the start Stop wiring Basics video. I have created a circuit test board that will has multiple start/stop stations. Instead of having to run the stop wire from station to station so it is in a serial mode, is there a way to run all the stop wires to a master and be able to stop from any station? Skip....

Why did you leave out hooking up the latching Circuit

you did not explained the auxiliary wire,

Sensei

Good video but it looks like you have 3 wires connected to the green button , but in your demonstration you only show 2 wires connected to it. The jumper from the stop button and the wire going to the relay. 2 wires . But at the end of the video the green button looks like it has 3 wires connected. Where does the third wire go ?

Did you explain the latch here ?

you put a cable from the NO jumper to the relay and another jumper on the relay and you did not mention that

Why do u have another wire coming off the jumper and u didn't explain wut the wire going to

where is third wire on start going?

You skipped the entire part where you wire the locking of the relay which is why people watch the video