Тёмный

Starting the Kodiak without destroying the engine in Microsoft Flight Simulator 

Jonathan Beckett
Подписаться 34 тыс.
Просмотров 28 тыс.
50% 1

Following an update recently, the Kodiak has become much more realistic. You must now follow real-world starting procedures in order to avoid destroying the engine. In this video I walk through both how to destroy the engine, and how to start it without destroying it, before taking the aircraft for a quick circuit.
#MSFS #Kodiak #SimWorksStudios #SWS #FlightSimulator #Flight #Aviation #Engine #Damage #Simulation #procedures #flight #flying

Опубликовано:

 

4 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 145   
@MojaveHigh
@MojaveHigh 2 года назад
You had it right the first time: once NG has reached 14, you push it to the low idle, not high. And you should really leave it in low idle during taxi. You only push it to high idle just before you enter the runway. You can watch just about any of Missionary Bush Pilot's videos for this.
@jonbeckett
@jonbeckett 2 года назад
Cheers for the tips :)
@jannikmatthias9289
@jannikmatthias9289 Год назад
I almost thought I made a bad purchase because I've only watched pre-patch start up videos on this plane and always blew it or had no thrust so this video saved me! Thank you so much!!!!!!
@jonbeckett
@jonbeckett Год назад
Welcome aboard!
@Ngamer834
@Ngamer834 Год назад
Thank you for this guide I managed to start the Kodiak first time without destroying the engine 😂. I have only had some short test flights in the Kodiak so far but WOW what a truly fantastic add on. The sense of immersion flying this has far exceeded my expectations. The way it handles on the ground and in flight is truly off the scale from any other flight sim add on I have tried so far.
@jonbeckett
@jonbeckett Год назад
Glad it helped
@dutchinfinity5991
@dutchinfinity5991 Год назад
Absolutely ❤ the explanation! Made me buy the plane, learn the aircraft, and now touring all the countries in the world
@paulkirkland3263
@paulkirkland3263 2 года назад
The Kodiak is on sale this weekend, so the temptation was too much for my credit card. After wiping out 3 engines, I found this video - THANK YOU!! Subscribed! :)
@jonbeckett
@jonbeckett 2 года назад
It's a great aircraft - and yes - the realistic start-up procedure is fun :)
@WesterlySr
@WesterlySr 7 месяцев назад
Great Video! I was having issues starting but you have cleared that up for me. By far my favorite plane. My favorite real life flight channel is Missionary Bush Pilot.
@Plumsouffle
@Plumsouffle 3 месяца назад
This is the aircraft I love to use. I have arguably better or more entertaining or better performing aircraft, but this is the one that feels right, particularly when I go exploring (usually because I underestimated terrain or weather!). I really hope this can be updated to study level someday. Thanks again, JB.
@karmah88
@karmah88 Год назад
i wondered what was happening and what that awful sound was, why i wasnt getting thrust lol. thanks its just what i needed. really glad to see it becoming even more realistic.
@jonbeckett
@jonbeckett Год назад
Cheers :)
@jay-rus4437
@jay-rus4437 Год назад
Just got this plane today. Looking forward to learning the specifics about it. Slowly getting my favorites in each class together. Airliner is fenix a320. Bizjet is Cessna Longitude. Bush plane is kodiak 100. Still havent decided on a small plane, but likely just the cessna 172. The first three will keep me busy for awhile. Lol
@AdminVortex762
@AdminVortex762 Год назад
Jonathan, you're costing me a fortune with these reviews! Just flown her for the first time - wow, she bites! :O
@jonbeckett
@jonbeckett Год назад
Glad you like them!
@Frankestein01nl
@Frankestein01nl 2 года назад
Not something you hear every day..."we're going to blow the engine up" ... i giggled hard. Thanks for the info!
@jonbeckett
@jonbeckett 2 года назад
Glad to help lol
@conlethbyrne4809
@conlethbyrne4809 Год назад
Hi Jonathan, got the Kodiak a few months ago & haven't flown it yet. So thank you for the start-up. All the best, Con
@jonbeckett
@jonbeckett Год назад
You're welcome :)
@flyingpedal
@flyingpedal Год назад
I agree with you its a very good addon. Immersive 100%
@jonbeckett
@jonbeckett Год назад
Love the Kodiak :)
@yams900
@yams900 Год назад
Great aircraft, one of the best ! I appreciate the amphibian version as well, so you can land on the water…not much extra to pay. Thx for sharing your knowledge Jon !
@jonbeckett
@jonbeckett Год назад
You're welcome :)
@stephan3868
@stephan3868 2 года назад
Many thanks!! I broke down a couple of Kodiaks before seeing your video 😁
@jonbeckett
@jonbeckett 2 года назад
No problem 👍
@LowescC
@LowescC 2 года назад
I enjoyed this more than I should have...
@jonbeckett
@jonbeckett 2 года назад
Boooom :) lol
@Ryan-hi6zg
@Ryan-hi6zg Год назад
Thank you for this video! Helped me out a lot, this plane is a lot of fun to fly
@jonbeckett
@jonbeckett Год назад
Glad to hear it!
@mikecoffee100
@mikecoffee100 2 года назад
yes yes the procedures must be followed propperly and Thank You
@jonbeckett
@jonbeckett 2 года назад
Absolutely :)
@revbob53
@revbob53 7 месяцев назад
I love your videos! Enjoyable and informative.
@maltimoto
@maltimoto Год назад
Thanks, you helped me not to destroy the engine!!!
@GulfCoastTim
@GulfCoastTim Год назад
Thanks for sharing this info. This plane was on my to buy list for quite sometime and i just bought it. I struggled with it for a couple hours (mostly cold and dark starts and also low engine power after starting) and wondered if it was buggy at first. NO, this was certainly not the case it is not buggy, it was ME that was buggy.😂 Turns out, it is a very realistic and detailed aircraft and the developers put a lot of effort into it and it shows. Definitely one of the best deals on the spring sale right now. I just took a flight in it out to the great barrier reef. No doubt, I'll be putting a lot of flights on this one.
@denisy6
@denisy6 Год назад
Again you are saving me, thank you sir!
@jonbeckett
@jonbeckett Год назад
Happy to help!
@yams900
@yams900 2 года назад
Something I’ve always wanted to know ! Thx Jon
@jonbeckett
@jonbeckett 2 года назад
You're welcome :)
@EagleZup
@EagleZup Год назад
Thanks a lot, very nicely explained
@jonbeckett
@jonbeckett Год назад
Most welcome!
@James-xt5cc
@James-xt5cc Год назад
Very very helpful! Thank you much. Love this airplane. Its slight backwards, I thought. In some you don't turn on avionics untill after engine start.
@jonbeckett
@jonbeckett Год назад
The guages are in the G1000 though - so you need the screen on to see them.
@James-xt5cc
@James-xt5cc Год назад
@@jonbeckett I knew that. 🤣
@Sataniceasterbunny
@Sataniceasterbunny Год назад
as soon as ATR comes out im waiting a how to start video from you Beckett :)
@jonbeckett
@jonbeckett Год назад
Can't wait!
@sebastienlevels5693
@sebastienlevels5693 2 года назад
Finally found a solution!! Thanks a lot!
@jonbeckett
@jonbeckett 2 года назад
Glad it helped!
@idale86
@idale86 Год назад
Thank you so much!
@jonbeckett
@jonbeckett Год назад
You're welcome!
@maity787
@maity787 Год назад
Lol 😂 ok, thank you I was wondering what was wrong with it. The milviz porter was doing the same. Again thanks.😂
@jonbeckett
@jonbeckett Год назад
No problem 👍
@ivorevans1795
@ivorevans1795 2 года назад
Interestingly the Pilatus porter POH has you engage the starter before you turn ignition on to make sure you get oil pressure Only when you see oil pressure do you turn ignition on Thought that was quite interesting
@traviseggl3794
@traviseggl3794 2 года назад
Yes, you watch engine oil pressure come alive when you are on the starter, but you want the engine turning on a PT6 when you turn the igniters on. You don't want to turn the igniters on if the engine isn't turning in case there is fuel in the engine. You always want an turbine engine turning when you do this. Some turbines with fadec just require you to hit the start button, and the computer takes care of everything, and I have to assume some of the newer PT6 variants, specifically those in helicopters have this. I have run PT6's in ag airplanes, and have flown some Air Tractors with a Walters turbine conversion on them as well.
@ivorevans1795
@ivorevans1795 2 года назад
Yes nice that the accuracy is improving. Fairly new to turbines and being the keeno to do it right that I am I download the POH before searching RU-vid. The TBM POH is over 900 pages! 3rd flight I ended up flying the trip manually as AP wouldn't engage. When I landed and was going through shut down procedure I realised I had forgotten to engage the AP auto trim switch!! With regard to hot start - haven't seen a POH yet that doesn't insist you check throttle quadrant for emergency power lever, throttle, prop lever and fuel condition lever all being in right place as part of before start procedure. Should be standard for all turbines
@jonbeckett
@jonbeckett 2 года назад
The fun thing is that each aircraft differs slightly in terms of procedure, because the hardware and systems are always different. And of course we jump between aircraft, and often struggle to remember "how does this one work again?" :)
@ivorevans1795
@ivorevans1795 2 года назад
@@jonbeckett yep exactly! Tbm starter switch goes off automatically. Caravan you have to switch off yourself. Like you say - it is great when they model failures accurately. Loving this sim just want the flight models to be more accurate on stock aircraft. Can't wait to test flight model on xplane 12
@Bigboss45305
@Bigboss45305 Год назад
I just made this mistake again lmfao 😂my cat basil said I was dumb and had to watch this video again
@kalleblom5564
@kalleblom5564 2 года назад
thank you very much! excellent content!
@jonbeckett
@jonbeckett 2 года назад
You're welcome :)
@GumperVanLier
@GumperVanLier 2 года назад
Despite how nicely this plane turns, I find it difficult to taxi. It's very similar to the Cessna 208B which Microsoft has improved over time but this is plane is worth the price especially after the last two updates.
@jonbeckett
@jonbeckett 2 года назад
Absolutely - the flight modelling is great.
@kidkokonut4581
@kidkokonut4581 2 года назад
Don't put propeller and conditioner on max. Taxiing don't need much prop 🤙
@todd92371
@todd92371 Год назад
Fuel conditioning on low.
@Breenild
@Breenild Год назад
Just saw your video, and I have a veto. The reason for the Hotstart is NOT that you forgot to start the fuel pump. It even starts with fuel pump in the standby position very nicely. The true reason is, when you switch the red cutoff-left to early from off to low (or high) position! This gets the famous Hotstart, because you inject fuel before you have a proper airflow thru the engine. This burns your turbine instantly, which is maybe half a million to repair for the Kodiak.
@jonbeckett
@jonbeckett Год назад
Ouch :) Great info!
@LinardyJourney
@LinardyJourney 2 года назад
now wonder. I was thought what is wrong with the kodiak. I thought the program was got some error. So it become more realistic now. thanks for the tutorial.
@jonbeckett
@jonbeckett 2 года назад
You are welcome!
@LinardyJourney
@LinardyJourney 2 года назад
@@jonbeckett Could share me the link where I can get the NXi for G1000 because the advisory keep blinking white
@jonbeckett
@jonbeckett 2 года назад
@@LinardyJourney it's built into Sim Update 10 - and is available in the marketplace (or at least it was)
@yams900
@yams900 Год назад
I’ve blown a few engines lately, so I’m revisiting this tutorial :) Should be good now :) I’ve been editing sound.xml file, to stop annoying lower the gears message in the amphibian version of Kodiak, unsure if successful…time will tell
@jonbeckett
@jonbeckett Год назад
Hah - I haven't had a go in the amphibian for ages!
@yams900
@yams900 Год назад
@@jonbeckett If/when you do, please let me if you’re getting that annoying audio alert about the landing gear
@davidunderwood3181
@davidunderwood3181 Год назад
I still find this the most infuriating aircraft to start. Even following what you go through in this, I have only managed to get it to actually start once or twice out of 30 attempts.
@jonbeckett
@jonbeckett Год назад
It starts for me every time :) You must be doing something odd? The only real trick is not to introduce fuel for a few seconds.
@fede_dale
@fede_dale 2 года назад
Thank you 👌👌
@jonbeckett
@jonbeckett 2 года назад
You're welcome
@twistedyogert
@twistedyogert Год назад
I've seen some people start the engine with the propeller at high RPM. Would that damage the engine? From what I've read, the reason you don't want to introduce fuel too early is that there wouldn't be enough air moving through the engine and thus cause a hot start. It's crazy how finicky and unforgiving a turbine engine is compared to a piston engine.
@jonbeckett
@jonbeckett Год назад
If you introduce fuel too early, it will build too much pressure when it ignites. If the engine is turning over, the fuel that gets injected and combusted is burnt and gone.
@Sergey6838
@Sergey6838 Год назад
Thank!!!!!
@jonbeckett
@jonbeckett Год назад
You're welcome
@twistedyogert
@twistedyogert Год назад
Ouch! Right in the wallet. Thank goodness this a simulation.
@jonbeckett
@jonbeckett Год назад
Right!
@vincefrommenton
@vincefrommenton Год назад
Hi! Excuse me but restart with hot engine it’s the same procedure?
@tnuhaes
@tnuhaes 2 года назад
Thanks!
@jonbeckett
@jonbeckett 2 года назад
Thankyou!!
@JimboAmerican1980
@JimboAmerican1980 Год назад
Great video buddy. Do you recommend the avionics update. ? I’ve bought the Kodiak 100 just not flown it yet on the Xbox series X.
@jonbeckett
@jonbeckett Год назад
Sim Update 10 included the G1000 update - so it's kind of non-negotiable now :)
@JohnVanderbeck
@JohnVanderbeck Год назад
Frustrating that developers don't actually include the procedures in the manual.
@MicheleTommy
@MicheleTommy Год назад
Hi Jonathan! For me it is too difficult to use as an aircraft in msfs. I have seen your videos and others, to inform me. I wanted to buy it, but I gave up. But it is a very beautiful and detailed aircraft. It would be nice if they also developed the Kodiak 900 for msfs.
@jonbeckett
@jonbeckett Год назад
Once you get your head around starting it up, it's not too bad :)
@alexanderfiebrandt6732
@alexanderfiebrandt6732 Год назад
6:08 This is LOW Idle ;-)
@alanharris2799
@alanharris2799 2 года назад
Great advice on the engine start, but you don’t need to go to main menu, you can just select restart flight which will be a bit quicker and you won’t need to recreate the flight plan.
@jonbeckett
@jonbeckett 2 года назад
You're wrong - if you cause an out-and-out engine failure, there's a quirk in the programming of flight simulator - that a restart won't fix - especially with the Kodiak.
@jonbeckett
@jonbeckett 2 года назад
The SWS forums are full of people asking about it.
@alanharris2799
@alanharris2799 2 года назад
@@jonbeckett worked for me, so maybe it wasn’t totally broken.
@alanharris2799
@alanharris2799 2 года назад
@@jonbeckett ok I tried this again this morning, did exactly as you did and broke the engine. Everything identical and just using restart flight, the plane started correctly using the same procedure you provided. No need to go back to main menu, I am on Xbox series X so maybe behaviour isn’t the same as PC. So, I’m not wrong for Xbox at least! 😉
@lkslokinhow
@lkslokinhow Год назад
Yep. Not working for me ): Not red line, the engine is not blowing. ITT gets at up to 415 C and NG% gets up to 21.2 and stays there.
@Sataniceasterbunny
@Sataniceasterbunny Год назад
i rl wish they could add an option in msfs to enable collision with other aircrafts npc and player ones.
@jonbeckett
@jonbeckett Год назад
It would be good fun, wouldn't it :)
@sascenturion
@sascenturion 2 года назад
Great video ..thanks 👍 Just a quick question....which airfield is this? 😀 ...looks good
@jonbeckett
@jonbeckett 2 года назад
It's the Wycombe Air Park / Booker airfield made by PilotPlus.
@uwebestmann2477
@uwebestmann2477 2 года назад
nice Video and nice information. Would you mind sharing the settings of the Airbus Throttle? Thank you in Advance
@jonbeckett
@jonbeckett 2 года назад
When I get a chance I'll do it :) Fiddling with the axis sensitivity for aircraft that don't allow you to calibrate seems to confuse a lot of people.
@jaroslavsevcik3421
@jaroslavsevcik3421 2 года назад
I have both Kodiak & Sim updated but I cant get engine started. The ITT is too low - 8° and does not increase. I have set everything correctly, even the BEACON lights and required bypass... Still nothing.
@jonbeckett
@jonbeckett Год назад
If you've previously damaged the engine, you have to re-start I think - because of a bug in the sim.
@jaroslavsevcik3421
@jaroslavsevcik3421 Год назад
@@jonbeckett Actually not. Now I managed to correctly start the engine several times in a row, even from a saved flight. So I guess something was wrong in my first attempt.
@Voltomess
@Voltomess 2 года назад
Please tell me what is ignition for? I just saw a 2 min video showing " how to start engine" and that guy started this engine without using ignition why?
@jonbeckett
@jonbeckett 2 года назад
It depends on the situation in which you are starting the engine. If you read the documentation that comes with the aircraft, it goes through the various scenarios and when you should and should not use ignition.
@davidthorne3231
@davidthorne3231 2 года назад
Hiya John Firstly love your channel and all the GA videos. Soft question, could help me out how to configure my tca trust controller to use the second lever for the prop. Have tried and just can't get it right. Thank for the kodiak videos ya had the engine problem thanks again
@jonbeckett
@jonbeckett 2 года назад
All you need to do is remove the existing prop assignments, then add the correct one by choosing the axis - don't bother wiggling the levers to detect them - it will get it wrong. L Axis X is the left stick, L Axis Y is the right stick.
@jonbeckett
@jonbeckett 2 года назад
If you search for everything assigned to L Axis Y, you can remove throttle etc from it too.
@LipsumLazyGamer
@LipsumLazyGamer Год назад
I wrote down this essential list... let's see. everytime I have to try a couple of times before a succesful crash during takeoff. anyway, g1000nxi has A LOT of options to configure it as you wish ;) hsi map as well. check it out.
@SirGosht
@SirGosht Год назад
How do you restore pitch trim back to neutral after takeoff?
@jonbeckett
@jonbeckett Год назад
Erm... by trimming the pitch back to neutral ? :)
@SirGosht
@SirGosht Год назад
@@jonbeckett sure but at what rate? Starting after takeoff or only after flaps are back to 20? Etc.
@harpoon_bakery162
@harpoon_bakery162 Год назад
when will they add the smoke and fire to the engine?
@jonbeckett
@jonbeckett Год назад
That's down to the aircraft developer to do that. In most cases, MSFS does not model damage for the same reason that Gran Turismo doesn't model damage. The licensed aircraft won't want their product shown in a bad light, and modelling damage properly is potentially more difficult than the entire rest of the simulator.
@harpoon_bakery162
@harpoon_bakery162 Год назад
@@jonbeckett Ok, thanks for the quick reply. DCS makes it pretty spectacular, like in VR, once you explode into flames you are taken on a ride above your smoke and flames to about 2000 ft. or higher , which is breathtaking. It just adds to the experience but I totally get what you are saying. Crashing and burning are not high up on their to-do lists.
@yams900
@yams900 2 года назад
I’m using the same controller, you might have config for thrust and propeller on previous videos ?
@jonbeckett
@jonbeckett 2 года назад
I'm not sure - I just configured the controller as per the plane - so I ended up with left stick for throttle/reverse, and right stick for pitch.
@yams900
@yams900 Год назад
I’ll configure the same way. Blew the engine 🔥 last night, it’s back to the drawing board. Good startup video ! Haven’t flown Kodiak for 1/2 year and it shows
@georgesiebes
@georgesiebes Год назад
Hi, can anyone help? No matter what I do, including going back to the main menu and creating a brand new flight, my previously cooked engine keeps starting hot from cold and dark. The SWS site now mentions "residual" engine behaviour, but not after completely going to main, I hope???? Needless to say, I follow the proper starting procedure.
@jonbeckett
@jonbeckett Год назад
As far as I understand, there is a problem with the simulator itself with certain types of aircraft failure, where the only solution is to go right the way back out to the main menu.
@georgesiebes
@georgesiebes Год назад
@@jonbeckett Hi I did, but even that is not working. Wondering if this "just me".
@georgesiebes
@georgesiebes Год назад
Hi, to my delight it wasn't "just me", a patch was released to fix the "residual ITT" issue and I'm back in business. What a great aircraft.
@sjohn5779
@sjohn5779 2 года назад
WHAT IS WITH THIS PLANE 😂. I've graduated from the blown engine phase but now for some random reason, the aircraft loses oil pressure after about an hour of flight at 13K feet. I did an emergency landing and turned everything off and started cold and dark. Everything went off without a hitch. WHY did it lose oil pressure at random?
@jonbeckett
@jonbeckett 2 года назад
Very probably temperature.
@TheEuphoricism
@TheEuphoricism Год назад
If you blow the engine -- you CANNOT just "restart flight" -- you MUST exit to main menu. This cost me a good hour!
@_Greebo_
@_Greebo_ Год назад
Any tips for starting the Kodiak at high altitude airports such as SLLP?
@jonbeckett
@jonbeckett Год назад
Use longer runways, and take off fast :)
@_Greebo_
@_Greebo_ Год назад
@@jonbeckett Don't seem to be able to get the engine to tick over at that airport presumably due to the high altitude. I'll ask ground crew if they can give me a push 😉
@williamwidjaja850
@williamwidjaja850 Год назад
oh you move it to low idle
@jonbeckett
@jonbeckett Год назад
?
@floatinflyinandfishing
@floatinflyinandfishing 2 года назад
easily the most difficult aircraft to fly properly in this game, and it is all because it flies like the actual plane. once the plane is in trim it handles pretty much like a real ga plane should. It is extremely difficult to get this plane into trim, and to keep it there. the under 70 torque is a little overdone. if you watch the flight portion here you will see it is out of trim most of the flight. you winged over and stalled because you needed a ton of rudder. I love the modeling, love the dynamics but this is not for beginners. it takes real work to fly properly
@jonbeckett
@jonbeckett 2 года назад
I don't think it's difficult to fly at all - if anything, in my opinion being more accurate makes it easier, because it behaves as it should. It's not on rails. All planes with proper flight models should require trimming all the time. Something you can't see in the video is me trimming it - because I use a hardware control for that. Thanks for the feedback :)
@Giampa_Pol
@Giampa_Pol 2 года назад
Ignition at OFF when engineering run
@mikecoffee100
@mikecoffee100 2 года назад
I never get the Taws system test ok only once and also no TOD messages = Vertical Speed
@jonbeckett
@jonbeckett 2 года назад
It depends if you have the NXI installed (from the marketplace) - the default G1000 has bugs :)
@mikecoffee100
@mikecoffee100 2 года назад
@@jonbeckett I have NXI but ok and OBS setting it for landing will freeze the sim on the Kodiak.
@hardware1197
@hardware1197 Год назад
Excellent! I can fly the upgraded plane without the BOOM....Kodiak is like a girlfriend I had....Super sexy and fun to play with, but always trying to kill me. Also anyone notice that after MS SU12 - Landing lights don't work?
@jonbeckett
@jonbeckett Год назад
Not used it recently - will have to take a look!
@neilward5968
@neilward5968 2 года назад
Its okay folks, its not real 😉😉
@jonbeckett
@jonbeckett 2 года назад
Hah.
@claesheijbel1360
@claesheijbel1360 2 года назад
The checklist and procedures for the Kodiak 100 can be found here sv.flightsim.to/file/25247/kodiak-100-jaydee-s-checklist-procedures-pdf
Далее
How to Fly The Kodiak 100 | Part 5: Engine Starts
18:22
How to Fly the Kodiak 100  | Part 7: Normal Take Off
26:06
How to Fly the Kodiak 100 | Part 3: Cockpit layout
18:14