State Of Charge control of Lithium-ion battery in MATLAB/Simulink!

Подписаться 6 тыс.

Просмотров 67 тыс.

50% 1

This video shows how to control the charging and discharging of an Li-ion (Lithium-ion) battery using SOC (State of Charge) parameters as a decisive factor in limiting the charging and discharging cycles.
---------------------------------------------------------------------------------------------------------------------------------------------------------
If you liked this video please share it with your friends and drop a like and subscribe by clicking the bell icon to not miss out on our latest content ;)
Comment down below what you think about this video,queries and requests are always welcome!
Stay tuned for more quality tutorials! Until then thanks for watching :)
Our website- howtoproject98...
Our Instagram handle- / theurbanscholar
Our Linkedin page- / the-urban-scholar
Music
------------------------------
The Clock (instrumental) by RYYZN / ryyzn
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/al-the-...
Music promoted by Audio Library • The Clock (instrumenta...
------------------------------

Опубликовано:

20 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 129

@ahmadbariqalfahri9372 3 года назад

Thank you so much sir, you really help my college assignment. Keep up the good work

@TheUrbanScholar 3 года назад

Thank you Ahmad! Do consider subscribing to our channel!

@aravindsubramanian4724 3 года назад

Really helpful video, I am wondering how can I simulate a case where you are charging the battery as well as providing to an additional load in parallel. For example running other loads while charging the battery.

@hamedkamali1293 3 года назад

Hello sir thanks for sharing youre job

@gauravdubey4587 9 месяцев назад

thanku so much

@muhammadasimkhan8041 2 года назад

my scope is not showing the curve.. what should i do? the overall circuit is perfect

@IST372 3 года назад

Excellent. Is it possible to make a battery circuit from the beginning? For example, how can we make the 1RC Thevenin Circuit of the Battery? Can you make an example especially with parameter detection? I would appreciate it if you do Positive / Negative Feedback Thank you.

@TheUrbanScholar 3 года назад

First of all sry for the late response 😔 We'll definitely do this in future for you we saw your mail as well, stay tuned 😉

@IST372 3 года назад

@@TheUrbanScholar I'm looking forward to the videos or e-mails from you. I requested this subject from you within the scope of my master thesis project. It would be great if you have an example with PSCAD other than MATLAB or if you can simulate the subject I have expressed with PSCAD. Thank you very, very much for your return. Good work.

@YounessHakam Год назад

You are great man

@alfandiwicaksono8146 3 года назад

Thank you sir, it is nice information

@ihsanbayu9699 3 года назад

at the minute 03:05 , I was unable to connect the goto and from to the chart port. There was no port at the chart, how can it be? Would you like to help me? For the information, I used MATLAB R2016a version

@nelsondarwinpaktech3954 3 года назад

good work sir..........

@TheUrbanScholar 3 года назад

Do subscribe if you liked our work :) Thank you!

@rutwikshivankar6438 7 месяцев назад

hey ! My simulink is not showing the litium ion battery ...how do I install lithium ion battery library then?

@rohandeokate3118 5 месяцев назад

Sir can you please give the path of library from where you have selected the battery or are there any addons that need to be added

@masihaaijaz5840 4 года назад

Please do a video on CC-CV charging of Li-ion based on SOC. Please

@TheUrbanScholar 4 года назад

Click on the bell icon, we'll do it in a week :)

@masihaaijaz5840 4 года назад

@@TheUrbanScholar done!

@TheUrbanScholar 4 года назад

Check the new Video! Part two will come on the weekend!

@TheUrbanScholar 4 года назад

As per your request 🙂

@masihaaijaz5840 4 года назад

The Urban Scholar So grateful ! Eagerly waiting for the next part

@masalem7697 4 года назад

THANKS FOR SHARING UR JOB

@TheUrbanScholar 4 года назад

Kindly do subscribe for much such videos :) share it with your associates as well

@shivantanukumarshiv7661 3 года назад

Sir can we control the SoC of battery by PI controller please reply

@TheUrbanScholar 3 года назад

Yes you can!

@harshjaswal3781 3 года назад

Hey man, love your videos, Big help. Can you make a video regarding the demand side management of a microgrid that stores excess power from the utility and gives back power to the grid during peak load hours using a neural network?

@tonycastillo8210 3 года назад

Interesting video, but I wonder that sort of batteries does not work in phasor, only in discrete or continuous, for phasor mode what do you advice?

@TheUrbanScholar 3 года назад

Hey! I haven't really tried using batteries in phasor mode. Does it not work?

@tonycastillo8210 3 года назад

@@TheUrbanScholar oh what a fast response, thank you. No, it doesn't work in this mode. The battery you performed in this video is my first option when I want use a battery

@TheUrbanScholar 3 года назад

Haha you're welcome. If it doesn't work in phasor mode I would suggest you to do an equivalent model of a battery instead.

@tonycastillo8210 3 года назад

@@TheUrbanScholar if you don't mind suggesting it now, please do it.

@TheUrbanScholar 3 года назад

What do you mean?

@adibkamali5585 4 года назад

I have measured data of battery, how to make a Simulink model using that measured data? I will be glad to watch your video about that thank you

@TheUrbanScholar 4 года назад

You can do a mathematical model of the battery since you already have data of the battery

@krimzlelou1926 3 года назад

@@TheUrbanScholar how please ?! can you make a video

@VENUGOPALD-om1vl Год назад

i am facing trouble while charging battery i.e. SOC decreases instead of increasing.......i couldn't get the output that u defined with this model.......could u plz help me out.......

@nitikapanwar8704 3 года назад

can we perform the SOC estimation of a battery module in a similar way by adding more number of batteries in series?

@TheUrbanScholar 3 года назад

Absolutely, but you'll have to find out the cumulative soc

@nitikapanwar8704 3 года назад

@@TheUrbanScholar you mean the SOC of the entire battery pack right?

@TheUrbanScholar 3 года назад

Yess

@nitikapanwar8704 3 года назад

@@TheUrbanScholar ok..thanks a lot for the help 🙏👍

@TheUrbanScholar 3 года назад

Do feel free to contact us any time :). Help us by sharing with your friends!

@kumarrishabhrajput3782 3 года назад

Sir can I use it for fast battery charging simulation, because it is my project , please response sir🙏

@TheUrbanScholar 3 года назад

Sure

@TheUrbanScholar 3 года назад

There's another video of battery charging, see that.

@kumarrishabhrajput3782 3 года назад

Sir please sir contact me personally for project I need your help

@kumarrishabhrajput3782 3 года назад

Sir I have to project on fast battery charger sealed lithium acid battery

@chaitanyapanse6222 3 года назад

Suppose of I have to find the over-all current of the entire battery pack what could be the possibile circuit?

@TheUrbanScholar 3 года назад

First of all sry for the late response 😔, I didn't get your question could you explain it better pls so that we can help you 😄

@chaitanyapanse7205 3 года назад

@@TheUrbanScholar i am sorry i am reframing my question what could be the circuit arrangement for finding out continues current for the battery pack?

@TheUrbanScholar 3 года назад

You'll need an ammeter ( current measurement block) in series with the battery, hope this helps

@lebnankam3570 3 года назад

How do you find the Li-ion battery state of health?

@TheUrbanScholar 2 года назад

I'm not sure about this unfortunately

@chandamrutiya7779 3 года назад

Hey, I am unable to connect from soc block to chart...I am using MATLAB 2013

@TheUrbanScholar 3 года назад

Sry for the late response 😔, Download state space extention on matlab and it'll work, hope this helps 😄

@m.fazazidnalmuna8231 3 года назад

@@TheUrbanScholar can you show me how to download state space extention sir, i have the same problem is unable to connect SoC to chart. Thanks

@mjmanju98 3 года назад

Sir,What are the specifications for li ion battery to get smooth curve as we seen in video

@TheUrbanScholar 3 года назад

No no its a POC it hasn't been designed

@nandhinibabu533 3 года назад

thank you so much for this video

@TheUrbanScholar 3 года назад

You're most welcome! 😁

@nandhinibabu533 3 года назад

may i know the matlab version you used here.

@TheUrbanScholar 3 года назад

Matlab 2020a

@smartknight7224 3 года назад

Sir I am charging a battery from one battery to other based on SOC between batteries.. I need help how can I do that with a converter in MATLAB SIMULINK.. Please help

@AdilAslam69 2 года назад

I am getting error that Output port of ideal switch is not connected 🙄

@masalem7697 4 года назад

I am asking if I used MOSFET or IGBT instead of the ideal switch, is it possible?

@TheUrbanScholar 4 года назад

Absolutely.

@speedyindian 8 месяцев назад

What all addons are required ?

@rajat3744 3 года назад

how to implement this in a real environment? what al components are required?

@GauravKumar-pc9dv 3 года назад

how to do SOC control in bidirectional converter ?

@TheUrbanScholar 3 года назад

Kindly watch the CC and CV sharing of battery in our previous video, and provide the same SOC condition, hope this helps 😁

@GauravKumar-pc9dv 3 года назад

@@TheUrbanScholar Thank you.. I will try and surely let u know.

@GauravKumar-pc9dv 3 года назад

I m getting confused how to design bidirectional converter with soc control

@TheUrbanScholar 3 года назад

Pls mail us at howtoproject98@gmail.com to help you better,as this is a small space to write answer🙂

@smartknight7224 3 года назад

@@GauravKumar-pc9dv sir did you get the idea.. Please help me.. I'm in same condition too

@khennuhfussanjaya2325 4 года назад

Sir, if u can help me.please do a SOC estimate using fuzzy logic w considering temperature effect please.. Thank you verry much!!!

@TheUrbanScholar 3 года назад

Hey Nuhfus, sorry for the late response. We seek to add to our collection of technical videos. For sure we'll do this in the future. Stay tuned!

@samuelameiza-djabli2350 3 года назад

Great video man💯 Just got one question, how do I make the charging and discharging sequence continuous?🤔 Because with your model, it just remains constant after 150s

@rockingstone7700 3 года назад

bro did u get your answer??

@beablessofficial Год назад

Any help on this please. Why does it remain constant after 150sec

@arghyamu 6 месяцев назад

not gating proper output at scope. plz help.

@YuvrajSinghYadav-y4v 11 месяцев назад

Why it is constant after discharge

@411-tulasirammudavathu5 7 месяцев назад

tanku bro

@factsdot3169 4 года назад

please do workk on electrochemical model of battery

@TheUrbanScholar 4 года назад

Sure we'll make a video on this in future but make sure to subscribe and click the bell icon to not miss out 😉

@sivaleeladokku5416 Год назад

Sir which version of matlab used

@TheUrbanScholar Год назад

You can use 2019 onwards

@akashchakraborty3933 2 года назад

can you implement the same model using simulink basic blocks if yes please help

@TheUrbanScholar Год назад

Most of these blocks are standard and basic :)

@korotkie_lapki_raptora4413 2 года назад

What library it is and where i can download it ?

@TheUrbanScholar Год назад

You can download on simulink, search for matlab battery on Google.

@izzattyshahrom2625 3 года назад

sir, can we use this simulation but we just include the charging part only? look forward for your response thank u 😊

@TheUrbanScholar 3 года назад

First of all sry for the late response 😔yes you can use only charging if you wish. You will have to slightly modify the logic, hope this helps 😃

@izzattyshahrom2625 3 года назад

The Urban Scholar ok noted, thank u sir 👍🏼

@raguramshivakarthikeyan8874 4 года назад

Asks that input port 1 ( m terminal ) needs to be connected bro

@TheUrbanScholar 4 года назад

Watch again and make sure to follow the steps shown in the video, you won't get any errors.

@hamedkamali1293 3 года назад

I have this problem like you!!!! ////Output port 1 Ideal Switch' is not connected.////

@rajat3744 3 года назад

@@hamedkamali1293 its just a warning

@TheUrbanScholar 3 года назад

These are just warnings

@100_trades 3 года назад

Can anyone please share me this simulation file.....its very urgent as I have exam tomorrow.....It will be a great help Thank You

@TheUrbanScholar 2 года назад

Sorry for the late response! All out simulations files are on Matlab file exchange :) check them out there!

@manjunathak7040 3 года назад

Hi can you send me that simulation file

@TheUrbanScholar 2 года назад

Google : Sankarshan Durgaprasad: the file is uploaded there :)

@soothingmusic4877 3 года назад

Bro, there was an error from clock Can i reslove it

@TheUrbanScholar 3 года назад

Hey! Hope you're doing well. I'm assuming you're asking if we can resolve it?

@soothingmusic4877 3 года назад

@@TheUrbanScholar yes

@soothingmusic4877 3 года назад

@@TheUrbanScholar I got issue with ideal switch output port

@TheUrbanScholar 3 года назад

What the issue?

@TheUrbanScholar 3 года назад

You could mail us the issue of you've got a problem :)

@mustafamoose5925 3 года назад

hey sir, can i get your email , i need some modification for this simulink

@TheUrbanScholar 3 года назад

howtoproject98@gmail.com

@mustafamoose5925 3 года назад

@@TheUrbanScholar check your email please

@mustafamoose5925 3 года назад

can you do me a code for this subject

@stsivadev Год назад

Sir i raised with error flag.. Subchart output data pulse can only map to main chart data if its size, type and complexity are fully specified. Please direct me how to overcome the above error