Thanks for the helpful instructions on how to adjust pump strength. Aquatec should ship a cheap 1.5mm allen key with the pump. On the bright side, I had the correct sized allen key.
If we have pump,what do we need to install the high pressure switch?I want to buy a pump like this but I don't understand the reason of the high pressure switch?I check my bucket when it's filled up I will turn off the pump myselfe.can I get only the pump?my osmosis filter is taking the water out very slowly,drop by drop
If someone was actually following along they would be putting the pump in the wrong direction of the arrow on top. But it was clear, I've never seen a two filter RO system before. Nice small footprint.
@@jared1432 yo I bought one and it did increase the pressure but it made the inlet pressure too high for me. My water source was 60psi from the hose so that was enough for my RO. For my situation I feed the RO water to a 100 gallon tank then hooked the booster pump to the tank and added a pressure switch to the line. Hmu if you have questions
@@therealdealgrowz5891 what's up man you may have just answered my question , so you can pull water from a reservoir with these pumps , whats the maximum psi produced drawing water from your tank using the booster pump ? I need to get around 60 or 70psi , pulling from a tank/reservoir just like you are Will this pump provide that ? I will be pulling water from a rain barrel and pushing it thru my RO system, so opposite of what your doing but the same difference really lol