Steel frame and concrete piers of an equipment shed: how to build 

I think to prevent concrete from staining the threads wrap them up with painters tape or cellophane. It would save time and energy

loved the video

Cool video man. Thanks

Put heat shrink over the anchor threads next time to keep clean. Save you time

Good job men

Produced a lot of those beams good times

It's an overkill to use an air tractor plane to keep the cement moist while it cures :D

I like the project your working on and maybe you can help me out. I want to build concrete piers to mount some steel to support a 16'x32' cabin 8 or 9 ft off the ground. What would be some materials I could use. I can get some 6"pipe and 6x6 inch tube both 1/4 wall. I was thinking on using 8 post but looking for opinions out here.

Nice to have professionals do a video not some fly by night DIY crap. Thank you.

how many shekels is this and can you just cut and weld your own beams together if u get the raw beams from somewhere?

What’s average cost building and pouring piers to the full finish installation

There's nothing like the sweet smell of pesticide being sprayed in the air by a crop duster.

How deep are the pier holes? Also do you think a pier foundation like this would work for an enclosed 39x57 building with a gravel floor. Great video, thanks!

How much do you charge per sq ft?

👍🏻👍🏻👍🏻

Nice sir any helper job their I have good welder and painter

NARF! Hi, how come you always put the bolts on the edge of the top of the pier? It just bothers me.. i'd think the center would be nicer. 2nd question.. What manufacturer do you use? Although seems like they mis ship/build a lot of things, that you have to fix. I'm in Buffalo NY, so I'm considering one that will be better suited to snow load. Do the manufacturers give you some sort of plate to set those bolts in the concrete? How exactly do you measure them all out? I would think this is one of the most important parts. Thanks for all the metal videos! these are the first i've ever seen and they're inspiring. Most people around here use wood, and they also try to use the amish. It looks like the metal goes together even easier than wood, so I'm interested in seeing if that works better for me. Trying to be cost effective, as I'd like to build many, to create a whole industrial park. Where are you located?! Thanks, Greg

Wrap your bolts with some masking tape next time it's a good trick. good job buddy.

I like this,where do you purchase the frame and other materials

Who’s the best company to buy a building kit from? North Florida- just across the Ga line. Do you travel?

Which company made your frame? I want use the same for a barn dominion. 🙏

Is there an advantage to bolting columns individually and then lifting the assembled rafter in between columns or could you assemble columns and rafter all together and just lift the hole thing? Thanks!

No foundation beam/walls between the piers ????

I'm curious why you wouldn't show how you leveled out all your footings? Determining the difference of elevation for each footing is needed when erecting a structure of this size and weight. Your footings didn't appear to be straight.

Anchor bolts errors...ahhhhhh

Soy fierrero pasa jale

I have a building that need need to put up 8,000 sq ft, I’m open for a quote if you guys are in California

Why has none of your buildings got no haunches or apex haunches on the rafters

@5:21 🤣🤣🤣🤣🤣

@everyone

Where are you based out of

What is that cancer plane spraying ?

Why don't people just build houses with steel?

Your setup system was not correct. You did few wrong setps for setup this street construction which is not good actually.

Possibly the worst effort I've ever seen