Steel Structure Project 1 in Tekla Structures 

Most welcome

Glad it was helpful!

My pleasure!

Noted

First you need analysis and design before start modeling part, This tutorial is modeling part in Tekla Structures software, For analysis and design you need to use Tekla Structural Designer or other Design software's, For design tutorial refer this video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-jdE9z5I4hnM.html

You are mostly welcome

Most welcome

You are welcome. This video only for how to create model and change sizes, but you need to create a model with design and analysis information for live project.

You are welcome

Yes you can export model from tekla structures to tekla structural designer (or) you can import model from tekla structural designer to tekla structures, Import and Export options are available in menu bar in both software's but you can't import or export every thing. First you need to do design first in any software just like Tekla Structural Designer or Staad Pro etc refer this videos Tekla Structural Designer ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-jdE9z5I4hnM.html Staad Pro ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-N94MIa4Lf3o.html After that you need to do some more design calculation for connection and bolting manually or using few software's Later you need to do modeling and detailing in tekla structures or any other software's.

@@GaniSkSir i thank you & appreciate for your elaborate reply . sir but sir I wish to get more clarity. First of all as you know that Tekla structures is really good in creating 3D models specially steel structure.Sir Please correct me if I am wrong in the process of what I understand of tekla software flowchart in the overall . To begin first i would create 3D model using Pre-assumed member sections & available connection details in Tekla structures and then further i could export that 3D model into Tekla structural Designer for Analysis & Design .. so after the analysis & Design if all the sections passes then it's ok but if it fails then I will change & choose higher member sections in particular . Finally sir i shall export the designed Model into Tekla structures for reinforcement & detailing & G.F.C drawings. I request you kindly make a full fledged video of these process of creating 3D model & exporting it into Tekla structures Designer for Analysis & design . Then again exporting the designed structural Model from Tekla structural Designer into Tekla Structures for Detailing, Drawings. Sir as you know we can create connection details in Tekla structures for steel structure 3D-model but I wish to know if i can check if connection details are passing in analysis & Design in Tekla structural Designer or do I have to use any perticular plugin for checking the strength of the connection details ?? If so how to do that? Expecting your reply soon

@@GaniSk @Gani sk Sir i thank you & appreciate for your elaborate reply . sir but sir I wish to get more clarity. First of all as you know that Tekla structures is really good in creating 3D models specially steel structure.Sir Please correct me if I am wrong in the process of what I understand of tekla software flowchart in the overall . To begin first i would create 3D model using Pre-assumed member sections & available connection details in Tekla structures and then further i could export that 3D model into Tekla structural Designer for Analysis & Design .. so after the analysis & Design if all the sections passes then it's ok but if it fails then I will change & choose higher member sections in particular . Finally sir i shall export the designed Model into Tekla structures for reinforcement & detailing & G.F.C drawings. I request you kindly make a full fledged video of these process of creating 3D model & exporting it into Tekla structures Designer for Analysis & design . Then again exporting the designed structural Model from Tekla structural Designer into Tekla Structures for Detailing, Drawings. Sir as you know we can create connection details in Tekla structures for steel structure 3D-model but I wish to know if i can check if connection details are passing in analysis & Design in Tekla structural Designer or do I have to use any perticular plugin for checking the strength of the connection details ?? If so how to do that? Expecting your reply soon

@@allenfrostjames5521 Yes, that is possible as you mentioned, currently I don't have time to do video on it. I will make a video on it later. you can try to do that process.

@@GaniSk Fine sir , hope you take out some time & make a video over that process..We look forward for a detailed video soon

and how to create anchor bolt and template drawing

and how to create deck sheet and deck slab in rcc how to show and create drawing and show in drawing

Thanks

You are mostly welcome

Welcome

Shear connection

@@GaniSk sir ,, which shld i used for moment connection ,,, or pls give the link where u provided

in teckla US environment cannot switch in mm so how

Indian Environment

If you want to use in mm units then use US metric environment or Indian environment

ohk sir thank you I watch your videos. actually i m learning modeling

@@qaisnaik8544 You are most welcome

I didn't get your question clearly, I have selected US(United States) Environment for this example project.

Yes, you can

INTRESTING

Sure, stay tune.

plz tell me

ok, I will do video on it

Indian Environment

To get this UB type of profiles, you need to select UK environment in Tekla Structures.

You are in blank environment. To get bolt size you should install environment as per your country. like US environment or UK environment.

Yes, refer this video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-CS2nkOqtpVg.html

To get ISMB profile, you need to select Indian Environment while open Tekla Structures, instead of select blank or other environments.

@@GaniSk thanks a lot. i think its not in educational software rigt??

@@imhamsgroup1677 you can do same thing in education software also, but you need install environments separately as per county standards.