Тёмный

Steeling the show - creating exceptional alloys of iron : the inaugural lecture of Harry Bhadeshia 

bhadeshia123
Подписаться 19 тыс.
Просмотров 4,2 тыс.
50% 1

Harry Bhadeshia's inaugural lecture, Queen Mary University of London
Sir Harry discusses the often haphazard yet remarkably graceful motion of atoms within solid iron, and how his work seeks to exploit these properties to build inspiring new physical forms, such as the world’s first bulk-produced nanostructured alloy.
A highly respected figure in the field of metallurgy, Sir Harry has authored and co-authored over 650 papers and several books on the subject. As a fellow of the Royal Society and the Royal Academy of Engineering, Sir Harry has also been awarded the Bessemer Gold Medal by the Institute of Materials, Minerals and Mining and was appointed the first Tata Steel Professor of Metallurgy in 2008. Sir Harry’s numerous collaborations include partnering with British Steel to develop alloys for the Channel Tunnel rails and working on high-performance armour steel with the Ministry of Defence.
Sir Harry’s lecture is part of our Night of Science and Engineering event, an evening hosted by Queen Mary’s Faculty of Science and Engineering in celebration of our latest cutting-edge research. Guests will have the opportunity to take part in demonstrations and immersive experiences showcasing our work, whilst networking with our academics and distinguished partners.
www.phase-trans.msm.cam.ac.uk/

Опубликовано:

 

8 мар 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 18   
@a.beyzade4676
@a.beyzade4676 Год назад
It was a pleasure to take part in your Phase Transformations class Professor! I was the student you mentioned at 24:00!
@bhadeshia123
@bhadeshia123 Год назад
First of all, I am absolutely delighted that you enjoyed the course, and indeed, that you took the trouble to comment here. You can see that you made both Haixue and I incredibly happy when you approached us. I wish you all the best, Harry
@abhradeepdas3889
@abhradeepdas3889 Год назад
It's always a pleasure to learn from you. You are absolutely amazing. Being a researcher and working in the field of additively manufactured steel, I learn a lot from you.
@bhadeshia123
@bhadeshia123 Год назад
Thank you so much for the lovely words. Additive manufacturing of steel components is a good research field with many challenges, so well done.
@user-bq5ku6yl3x
@user-bq5ku6yl3x Год назад
Thanks for sharing. This refreshes our memory of your wonderful talk on February 8.
@bhadeshia123
@bhadeshia123 Год назад
Thank you very much, you are more than welcome.
@energiam880
@energiam880 Год назад
Your videos on ferrous metallurgy are some of my most useful resources in the field, as an R&D metallurgist for an international manufacturer of cast iron automotive components. It always inspiring to know the latest development in ferrous metallurgy, given the amazing alloying possibility of Fe! As my company is looking at product diversification, which may also extend to the development of new alloys, I'm always inspired by the rapid development of computational metallurgy and its implications for alloy design! Do you think foundries could collaborate with universities to develop Cast Iron alloys further (considering cast iron's inherent recyclability, and high strength/embodied energy ratio) as a (comparatively) sustainable engineering material? PS: I was a Ph.D. student under Prof Mark Jolly!
@bhadeshia123
@bhadeshia123 Год назад
Thank you. There is a significant carbon dioxide burden associated with iron production. So making a better cast iron that can be used in smaller quantities, while maintaining the same function, is probably the best way to achieve a reduction in the amount of iron used. Collaboration is of course a good idea, but with objectives clearly defined. Best regards, Harry
@metalurgiuntirta
@metalurgiuntirta Год назад
Hello Prof. Bhadeshia.... Salam hangat dr Indonesia
@bhadeshia123
@bhadeshia123 Год назад
Thank you, and warm greetings to you as well.
@calebschenck4493
@calebschenck4493 Год назад
Wonderful talk! I remember seeing you for the first time at IMAT 2022 in New Orleans. I will send your regards to John Speer today, in fact! Hope I can meet you again one day :)
@bhadeshia123
@bhadeshia123 Год назад
Thank you so much. The New Orleans meeting was great, and my first time there. Best regards, Harry
@TheAwesomePawan
@TheAwesomePawan Год назад
Congratulations on your retirement, Dr Bhadeshia. I read your papers on hydrogen embrittlement and heard great things about you from Dr Speer.
@bhadeshia123
@bhadeshia123 Год назад
Thank you - after retiring from Cambridge, I have now joined Queen Mary University of London as Professor of Metallurgy, so I hope to do more. Please give my regards to John Speer, who is one of my favourite metallurgists. Best wishes, Harry
@tadeushogenelst7537
@tadeushogenelst7537 Год назад
volume --> 11
@bhadeshia123
@bhadeshia123 Год назад
?
@tadeushogenelst7537
@tadeushogenelst7537 Год назад
@@bhadeshia123 It means I enjoyed the lecture very much. The 'volume to 11', to my knowledge, stems from mucisians (guitar players) turning the volume knob of their amplifier beyond the conventional maximum of 10. What I mean to say is that your courses and lectures are music to my ears. Have a splendid day.
@bhadeshia123
@bhadeshia123 Год назад
@@tadeushogenelst7537 Thank you so much, I was not familiar with the phrase. I might use it myself in the future. Best regards, Harry
Далее
Metal Alloys of the Future?
15:25
Просмотров 714 тыс.
Sustainable steel production
1:02:45
Просмотров 2,1 тыс.
Why is the carbon content in steel so important?
16:33
Просмотров 116 тыс.
A needlessly complicated but awesome bridge.
13:24
Просмотров 780 тыс.
Metals and Alloys, lecture 10, Alloys of Iron
32:31
Просмотров 40 тыс.
The Turing Lectures: The future of generative AI
1:37:37
Просмотров 566 тыс.
Steel Manufacturing - Including Blast Furnace and BOS
18:07